Sorry, this product is now sold!
Used ECM Titanium Full version (does not need to be linked to KESS/K-TAG account) Subscription included until 09/12/2021.
-
Out of stock
Used ECM Titanium Full version (does not need to be linked to KESS/K-TAG account) Subscription included until 09/12/2021. -
SLAVE tool, works in conjunction with a WinOLS software. This tool has no annual fees. Updates and technical support are free! -
Sale!
This tool uses an annual subscription model for updates, support and online services. The first calendar year is included, value 200 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available.
Professional diagnostic tool for VW Group cars with an update for the given year, extended by other expert functions. -
Out of stock
This Road Test Dyno installs in just two minutes and ensures accurate and continuous measurements of your vehicle's parameters. -
Out of stock
This tool uses credits to download setting files for ECU types. 1000 credits are included, value 1000 euros. Credits are not mandatory for use, however services which require credits will not be available.
Sorry, Dimsport tools are subject to sales restrictions!
Please click here to contact us if you wish to purchase
-
J2534 Tactrix Openport 2.0 interface and a BitSoftware Senselock USB dongle are required in order to use this software. For full info about BitSoftware products click here. -
MASTER tool, reads/writes open BIN files. This tool uses a subscription model for updates, support and online services. The first year is included, value 600-1000 euros, depending on tool configuration. A valid subscription is mandatory for use.
Available in the following configurations:- DFOX START: OBD CARS/MOTO
- DFOX HEAVY: OBD TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
SLAVE tool, works in conjunction with a linked Master. This tool uses a subscription model for updates, support and online services. The first year is included, value 500-800 euros, depending on tool configuration. A valid subscription is mandatory for use.
Available in the following configurations:- DFOX START: OBD CARS/MOTO
- DFOX HEAVY: OBD TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
SLAVE tool, works in conjunction with a WinOLS software. This tool has no annual fees. Updates and technical support are free! -
Sale!
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 300-500 euros (depending on software activations). A valid subscription is mandatory for use. -
Sale!
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 500-800 euros (depending on software activations). A valid subscription is mandatory for use.
-
Out of stock
Sorry, this tool is now sold!
- Supports engine & gearbox controllers
- Lifetime activation included
-
MASTER tool, reads/writes open BIN files. This tool has no annual fees. Updates and technical support are free!
Includes the AMT BST interface, USB & bench cables and carry case. -
Kit Universal MAGBench FULL includes:- FLK08 FLEXible Bench withj slotted top panel and 8 x pogo pin probes
- FLK04 BDM Adapter kit for Bosch, Siemens, Marelli and Delphi ECUs
- FLX4.10 Articulating Arm for FLEXible Bench
- FLX4.10G Adapter for Toyota group (including Denso 175822-xxx)
-
MASTER tool, reads/writes open BIN files. This tool has no annual fees. Updates and technical support are free! -
Sale!Out of stock
Sorry, this tool is now sold!
- Supports engine & gearbox controllers
- Lifetime activation included
-
Promo KESS3!
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 1300 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available. -
Promo KESS3!
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available. -
KESS v2 / K-TAG users are eligible to upgrade to KESS3, please submit your request here.
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available. -
KESS v2 / K-TAG users are eligible to upgrade to KESS3, please submit your request here.
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 1300 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available. -
Includes hard plastic carry case. This tool has no annual fees. Software updates are free! -
Sale!
Limited offer, while stocks last!
Suitable for VW Audi Seat Skoda Fiat Opel vehicles, a multifunction Tacho/Immobiliser/Key Coding tool.
- Support for VDO dashboards for Audi A1,Q3, VW, Skoda, Seat MY2009 - 2016 with NEC mcu and 24C32 or 24C64 eeprom.
- Mileage change for Magnetti Marelli dashboards with NEC and 95320 eeprom! ONLY via OBD! Without disassembly of instrument panel. Supports NEC MCU with 256 kB, 512 kB and 1MB flash memory.
- NEW Super Rapid key programming feature for VAG cars with VDO and Magnetti Marelli dashboards on CAN bus! ( TP2 and UDS protocols )
- Support for older VDO dashboards for VW Polo, Skoda Fabia,Roomster MY2006-2009 K-Line via BCM - KW1281 protocol.
- Support for Magnetti Marelli MM5/7/9 dashboards for VW from years 2009-2013 with NEC + 95320 eeprom, or 9S12 MCU .CAN bus - UDS protocol. Full support for VW Up, Skoda Citigo, Seat Mii with Marelli 9S12 dash MY2010+.
- Full Support for brasillian VDO dashboards of VW Fox, SAVEIRO, POINTER, ect . from year 2011 + with NEC D70F3422 mcu and 24C32 eeprom. Communication via K-Line - KWP2000 protocol.
- PIN code and CS data reading, Key programming via OBD for VW cars: GOL, FOX, SAVEIRO G5 from years 2009 - 2013 . 9S12 MCU with , or without external eeprom . Pre-programming with CS data of the new transponder keys for these cars when there is no valid key of the car! Communication via K-Line - KWP2000 protocol.
- PIN code and key data reading, key programming for Fiat cars with Delphi BCM MY2007-2017
- Supported Delphi BCM: NEC3237,3379,3556,3557,3633 with dataflash or external eeprom!
- Supported FIAT cars: Grande Punto, Doblo, 500, Panda, Qubo, Fiorino with Hitag2 transponder keys
- 500X, Tipo (Egea) with Megamos ID88 remotes MY2015-2017
- Key programming for Opel cars with Immo1,2 and Immo3 (CAN bus) up to year 2009
- Pin code reading from engine ecu of some Opel cars with Immo2. Program/erase keys of immo1,2 and 3. Pin code is required! Clear engine ecu, adaptation of virgin ecu to Immo2. Clear immo2, immo3, adaptation of virgin Immo2 to engine ecu.
- Built-In programmer for Megamos ID48, ID88, and Hitag2 transponder chips or remotes
-
Out of stock
This tool has no annual fees. Updates and technical support are free! NEW: Compatible with VehiCAL logger -
This professional tool allows connection with any ECU thanks to its slotted top panel and pogo pin probes.
