-
Sale!Add any of these further products at reduced prices!
-
Sale!Add any of these further products at reduced prices!
-
Out of stock
Sorry, this tool is now sold!
>> Similar tool available here <<
- OBD + BOOT + ENET
- BOSCH UNLOCK plugin MAGP1.18
- Supports engine & gearbox controllers
- Lifetime activation included
-
Out of stockPlease note, we can only sell this product to customers who purchased WinOLS from Chiptuningshop. Unfortunately we can not handle licenses which were supplied by other resellers. Please enter your registered WinOLS email below and we will send you an upgrade offer:
-
Sale!
MAGICMOTORSPORT FLEX Master tool with FULL activations
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 800 euros. A valid subscription is mandatory for use. -
J2534 Tactrix Openport 2.0 interface and a BitSoftware Senselock USB dongle are required in order to use this software. For full info about BitSoftware products click here.
-
Out of stock
Sorry this tool is now sold!
Used bFlash master tool, includes active subscription until August 2022 and transfer of ownership! This tool is in great condition, as new and complete.
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is mandatory for use.
Overview:MASTER bFlash, bDiag, bLog, bSpy software plugins
** NOW with bTrace LIVE tuning included! **
- Read/write master open binary files
- OBD, BENCH, BOOT, BDM, JTAG protocols
- Hardware interface and USB cable
- OBD cable + OBD Y-cable
- Direct ECU + TCU cables, tripod + boot pin
- 12V Power supply (Multi plug UK/EU/AU/US)
- Heavy duty carry case
- Supported ECU list here
-
SLAVE tool, works in conjunction with a linked Master. This tool uses a subscription model for updates, support and online services. The first year is included, value 500-800 euros, depending on tool configuration. A valid subscription is mandatory for use.
Included protocols: DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS For DFOX CUSTOM >>CLICK HERE<<
ADDITIONAL PACKAGES: PRO:- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
MASTER tool, reads/writes open BIN files. This tool uses a subscription model for updates, support and online services. The first year is included, value 600-1000 euros, depending on tool configuration. A valid subscription is mandatory for use.
Included protocols: DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS For DFOX CUSTOM >>CLICK HERE<<
ADDITIONAL PACKAGES: PRO:- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
Out of stock
Sorry, this tool has now been sold!
- Used FLEX Master with FLS0.1M ECU OBD + Bench software activation.
- Includes active subscription until August 2023 and transfer of account!
-
Out of stockThis Road Test Dyno installs in just two minutes and ensures accurate and continuous measurements of your vehicle's parameters.
-
Sale!MASTER tool, reads/writes files in .HPT format, compatible with VCM Editor. VCM Scanner - Diagnostic and advanced real time data logger tool, which is completely free! VCM Editor - Flash tool and editor functions operate on a credit based licensing system.
Credits are used as currency to purchase licenses for the different modules and licensing a module gives you the ability to tune it. The number of credits necessary to purchase a license varies depending on the vehicle. You can find a complete list of supported vehicles and credit costs here. -
Out of stock
Sorry, this tool is now sold!
- OBD K-Line, CANBUS, DoIP ENET
- VAG FRF/ODX/SGO flasher
- BOOT/BENCH Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
- Motorola BDM - MPC5xx
- Read and write encrypted SLAVE files
- Active subscription included
- NEW! Unrestricted slave option allows user to work any master
-
Out of stock
We are selling this tool on behalf of a client, please contact us if you wish to purchase.
-
Out of stock*FLEX tool and cables not included
- Ergonomic handle
- Spring latches
- Made of high impact, thermal and abrasion resistant polypropylene
-
- DoIP ENET Cable
- VAG FRF/ODX/SGO flasher
- BOOT/BENCH Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
- Motorola BDM - MPC5xx
- All accessories included for OBD, BOOT and BENCH
- High current Power supply suitable for BOOT, BENCH and BDM
-
J2534 Tactrix Openport 2.0 interface and a BitSoftware Senselock USB dongle are required in order to use this software. For full info about BitSoftware products click here.
-
Out of stockScope of delivery:
- PowerBox for PCMflash
- DB15 tricore cable with GPT connections
- 12V power supply
-
PROFESSIONAL/TRADE BUYERS ONLY, WE DO NOT PROVIDE FILES OR SUPPORT TO END USERS!
This tool can only read/write encrypted slave files, a master decoder unit is needed to pack/unpack these files. This device will be VIN LOCKED to a single vehicle on first use. This device MUST be physically initialised by the master decoder before it can be used. Included with the Powergate 3+ is a standard 16 pin OBD2 cable and protocols for CARS only. -
This tool uses an annual subscription model for updates, support and online services. The first year is included, value 500 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available.
Please complete the details below if you wish to purchase this product and we will contact you! -
Sale!SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 300-500 euros (depending on software activations). A valid subscription is mandatory for use.
-
Out of stock
Sorry, this tool is now sold!
OBD / ENET / BOOT / TCU / MEDC17 + MDG1 BENCH / FRF / VBF Master