Posted on

CMDFlash VAG Simos 18 Probe

This BDM Style probe allows reading/writing of VAG Simos 18 control unit without soldering.

No additional resistors or boot pins are required!

It is supplied with a cable to connect the ecu to the boot interface (via flat cable which is supplied with CMDFlash). It can be used to read/write password and also read/write the memory over Boot Strap Loader mode.

Power is supplied by your existing CMD BDM/Tricore power supply.

 

 

Posted on

MPPS TPSG Opel / Vauxhall EDC17C59 Probe

This BDM Style probe allows reading/writing of Opel / Vauxhall Bosch EDC17C59 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects to the MPPS TPSG Interface.

The probe is fitted with switches that allow the circuit to be changed for password reading and also regular programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, power is supplied by your existing TPSG power supply.

Posted on

CMDFlash Nissan / Renault EDC17C84 Probe

EDC17C84_Front

This BDM Style probe allows reading/writing of Nissan and Renault Bosch EDC17C84 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and works only with our BSM interface for CMDFlash.

The probe is fitted with switches that allow the circuit to be changed for password reading
(CMD BMW Fxx plugin + BSM interface are required) and programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, power is supplied by your existing CMD BDM/Tricore power supply.

Posted on

NEW! MPPS TPSG Bosch MEDC17 Probe

MPPS TPSG Probe

MPPS TPSG Probe

This probe allows you to connect your MPPS TPSG boot interface easily and comfortably to all types of Bosch MEDC17 ECUs. 

The probe supplies power and CAN bus to the ECU, additional connections for BOOT, CNF, RST are included for boot mode and S1, S2 for password reading in Bosch Service Mode.

An optional universal boot pin kit can be added to allow up to 3 boot connections without soldering.

Please note, you must have the MPPS boot plugin and the TPSG boot interface in order to use this product.

TPSG2
Click to Enlarge

 

 

Posted on

K-TAG / Trasdata Ford SID208 Probe

This BDM Style probe allows reading/writing of Ford & Land Rover Continental SID208 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects directly to the K-TAG or Trasdata interface.

The probe is supports both password reading and programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment.

Posted on

CMDFlash PSA MED17.4.2 Probe

This BDM Style probe allows reading/writing of Peugeot and Citroen Bosch MED17.4.2 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects to the CMDFlash Boot Interface.

The probe allows password reading and also programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.

Posted on

K-TAG / Trasdata Opel EDC17C59 Probe

This BDM Style probe allows reading / writing of Opel / Vauxhall Bosch EDC17C59 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects directly to the K-TAG or Trasdata interface.

The probe is supports both password reading and programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by the flash tool.

Posted on

CMDFlash BMW Fxx EDC17C41 / EDC17C56 Probe

This BDM Style probe allows reading/writing of BMW F-Series Bosch EDC17C41 and EDC17C56 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects to the CMDFlash Boot Interface.

The probe allows password reading (CMD BMW Fxx tool set required), and also regular programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.

EDC17C41-56_underside

Posted on

CMDFlash Opel / Vauxhall EDC17C59 Probe

This BDM Style probe allows reading/writing of Opel / Vauxhall Bosch EDC17C59 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects to the CMDFlash Boot Interface.

The probe is fitted with switches that allow the circuit to be changed for password reading
(CMD BMW Fxx tool set required), and also regular programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.