Posted on

DFOX: BMW F-Series + More Cloning Solutions

 

New OBD driver for BMW / Mini F Series cars

New solutions via OBD for BMW and MINI cars with EDC17 and MEVD17 control units.
We have added new drivers in DFOX to be used via the OBD socket in order to work on the BMW / Mini F Series without having to remove the ECU from the car.
Automatic coding and error cancellation function.
Through DFB write + patch the programming counter does NOT increase!
The BACK TO STOCK function has also been added to restore the control unit to its original factory state.

Virtual reading and writing
Recovery and checksum available
Back to stock function

  • EDC17C41
  • EDC17C50
  • EDC17C56
  • EDC17C76
  • EDC17CP09
  • EDC17CP45
  • EDC17CP49
  • MEVD17.2
  • MEVD17.2.3
  • MEVD17.2.4
  • MEVD17.2.5
  • MEVD17.2.6
  • MEVD17.2.8
  • MEVD17.2.9
  • MEVD17.2.G
  • MEVD17.2.x

NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automated function to clone the following control units with OTP zones and password adaptation:

BMW EDC17CP02
HYUNDAI / KIA ME17.9.11
HYUNDAI / KIA EDC17C57
HYUNDAI / KIA BOSCH KME1.9.3
LAND ROVER EDC17CP42
RENAULT EDC17C11
VAG MED17.5.5
VAG EDC17U01

 

Posted on

bFlash Update V1907A


 

Posted on

bFlash Update V1906A – MED9 / EDC16 Bench Mode

MED9 / EDC16 Bench Solution!

A common way to tune or clone Bosch MED9 and EDC16 control units is BDM. This requires to open the ECU, connect to the 14 pin BDM port, proceed, then reseal and close the unit.

Some units also require the board to be flipped to access the BDM port. Well… No more.

At bFlash, rather than releasing another BDM in 2019, we decided to provide our users a modern & innovative solution to work with legacy ECUs :

Bosch MED9 & EDC16 solution – full iFlash, eFlash and Eeprom access from the ECU connector.

AUDI
MED9.1 MPC562
MED9.1.2 MPC564 (only models without TPROT)
MED9.1.3 MPC564 (only models without TPROT)
EDC16U1 MPC556
EDC16U31 MPC562
EDC16U34 MPC562
EDC16CP34 MPC564

BMW
EDC16C1 MPC556
EDC16C31 MPC562
EDC16C35 MPC562

CITROEN
EDC16C34 MPC562

DODGE
EDC16C2 MPC556
EDC16CP31 MPC564

FIAT
EDC16C39 MPC562

FORD
ME9.0 MPC562 (only models without TPROT)
EDC16C34 MPC562

IVECO
EDC16C39 MPC562

LANCIA
EDC16C39 MPC562

MERCEDES
EDC16C32 MPC562
EDC16CP31 MPC564

PEUGEOT
EDC16C34 MPC562

SEAT
MED9.1 MPC562
EDC16U1 MPC556
EDC16U31 MPC562
EDC16U34 MPC562
EDC16CP34 MPC564

SKODA
MED9.1 MPC562
EDC16U1 MPC556
EDC16U31 MPC562
EDC16U34 MPC562
EDC16CP34 MPC564

VOLKSWAGEN
MED9.1 MPC562
MED9.1.3 MPC564 (only models without TPROT)
EDC16U1 MPC556
EDC16U31 MPC562
EDC16U34 MPC562
EDC16CP34 MPC564

VOLVO
VOLVO ME9.0 MPC562 (only models without TPROT)

New bFlash protocols in action:


Posted on

bFlash Update V1906A – BMW / Mini MEVD17.2.x

Working with British and German cars?

We have added full OBD-UDS protocols for even more petrol vehicles equipped with Bosch ECU.

As always we worked hard to deliver safe and fast protocols.
Virtual read, first write 11 minutes, subsequent write under 2 minutes.
Over 11000 original BMW & Mini MEDC17 files are stored on our server.

This release covers:

NEW OBD-UDS PROTOCOLS

BMW:
Bosch MEVD17.2.3 TC1793
Bosch MEVD17.2.5 TC1797
Bosch MEVD17.2.8 TC1797 Master & Slave
Bosch MEVD17.2.9 TC1797

Mini
Bosch MEVD17.2.3 TC1793

 

bFlash automatically detects the ECU during identification.
It couldn’t be easier!