BitBox – ECU reflash software
BitBox is an emerging software package that allows identification, reading and writing of internal flash memory within control units for various purposes.
The reflash software works with the ECU over CAN or K-line using the J2534 Tactrix Openport 2.0 interface.
The software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture which needs to be connected to the Internet.
Available Modules:
Toyota
Software module for reading and writing Toyota Denso Gen1 engine controllers used in Toyota and Lexus petrol and diesel vehicles through the diagnostic connector.
Software module for reading and writing Toyota Delphi Gen1 engine controllers used in Toyota and Scion petrol vehicles through the diagnostic connector.
Software module for reading and writing Toyota Denso Gen2 (NewGen) engine and transmission controllers used in Toyota and Lexus petrol and diesel vehicles through the diagnostic connector.
Software module for reading and writing Toyota Denso Gen3 engine controllers used in Toyota and Lexus petrol vehicles through the diagnostic connector.
Software module for virtual reading of original files via internet server. This is used ONLY for obtaining original files, writing is not supported.
Package of modules:
Toyota Denso Gen1 CAN
Toyota Delphi Gen1 CAN
Toyota Denso Gen2 (NewGen)
Toyota Denso Gen3 CAN
Toyota Gen1 Virtual Reader
BMW
Software module for reading and writing Siemens GS20 and Bosch GS8.60.2 ECUs through the diagnostic connector.
Software module for virtual reading and writing of BMW EDC17/MED17 ECUs fitted in Exx vehicles through the diagnostic connector.
Software module for virtual reading and writing of BMW EDC17/MED17 ECUs fitted in Fxx vehicles through the diagnostic connector.
Software module for virtual reading and writing of BMW MG1/MD1 MPC5577 ECUs fitted in Fxx/Gxx vehicles through the diagnostic connector.
BMW Exx/Fxx/Gxx Bosch CAN/ENET Module Package
Software module package to flash Bosch EDC17 / MEVD17 / MG1 / MG1 ECUs fitted to BMW Exx/Fxx/Gxx cars through the diagnostic connector.
Software module for reflashing on the BENCH by CAN-bus Continental ECUs used in BMW petrol vehicles.
Mercedes Benz
Software module for reading and writing Bosch EDC17 ECUs fitted to MB vehicles.
Software module for reading and writing Bosch MED17 ECUs fitted to MB vehicles.
Software module for reading and writing Delphi ECUs fitted to Diesel MB vehicles.
Mercedes Benz Siemens/Continental SIM271
Software module for reading and writing SIM271 ECUs fitted to MB vehicles.
FCA Group
Chrysler / Dodge / Jeep / FCA Gen1 Petrol CAN
Software module for reading and writing Motorola NGC3, NGC4, NGC4A and Continental GPEC, GPEC2 ECUs through the diagnostic connector.
Chrysler / Dodge / Jeep / FCA Gen2 Petrol CAN
Software module for reading and writing LOCKED Continental GPEC2, GPEC2A ECUs. This module includes UNLOCK function via boot mode, and must be unlocked before writing can be accomplished
Chrysler / Dodge / Jeep / FCA Bosch Diesel CAN
Software module for reading and writing Bosch EDC17 ECUs through the diagnostic connector.
Korea
Software module for reading and writing Ssangyong Delphi Diesel ECUs through the diagnostic connector.
Software module for reading and writing Ssangyong Siemens Petrol ECUs through the diagnostic connector.
Software module for virtual reading and writing Denso ECUs fitted in Hyundai and Kia diesel vehicles through the diagnostic connector.
Software module for reading and writing ECUs fitted in Hyundai and Kia petrol vehicles through the diagnostic connector.
Software module for reading and writing SIM2K-25x/26x ECUs fitted in Hyundai and Kia vehicles through the BSL mode.
Hyundai / Kia Kefico CPxxxx Petrol CAN
Software module for reading and writing Kefico CPGDSH2.2x.x/CPEGD2.20.x ECUs used in petrol Kia and Hyundai vehicles.
Hyundai / Kia Kefico CPxxx3 Petrol CAN
Software module for reading and writing Kefico CPEGD3.20.1/CPEGP3.20.2 ECUs used in petrol Kia and Hyundai vehicles.
India
Software reading and writing with CAN-bus Delphi ECUs used in diesel vehicles from Indian market
Isuzu
Software module for reading and writing by CANbus Isuzu diesel vehicles with Transtron ECUs based on Renesas SH7058, SH7059, SH72533 and SH72544.
Software module for reading and writing by CANbus Isuzu diesel vehicles with Transtron ECUs based on Aurix TC265D.
Honda
Software module for reading and writing ECUs by CANbus used in Honda/Acura petrol vehicles.
Ford/JLR
Software module for reading and writing Bosch MG1 ECUs fitted to Ford vehicles with petrol engines.
Software module for reading and writing Continental EMSxxxx ECUs fitted to Ford vehicles with petrol engines.
Software module for reading and writing Continental SID2xx ECUs fitted to Ford vehicles with diesel engines.
Ford Delphi / Visteon Diesel CAN
Software module for reading and writing Delphi / Visteon ECUs fitted to Ford vehicles with diesel engines.
Ford Bosch MED(G)17 Petrol CAN
Software module for reading and writing Ford petrol vehicles with Bosch MED(G)17 ECUs.
Software module for reading and writing Ford petrol vehicles with Bosch ME(G)9 ECUs.
Jaguar/Land Rover Bosch MED17 Petrol CAN
Software module for reading and writing Jaguar/Land Rover petrol vehicles with Bosch MED17 ECUs.
Mazda
Software module for reading and writing CAN bus Denso and Mitsubishi ECUs fitted to SkyActive-D diesel engines.
Software module for reading and writing CAN bus Denso and Mitsubishi ECUs fitted to SkyActive-G petrol engines.
PSA Group
Software module for reading and writing ECUs fitted to Peugeot and Citroen petrol vehicles.
Software module for reading and writing ECUs fitted to Peugeot and Citroen diesel vehicles.
Renault / Nissan
Software module for reading and writing ECUs fitted to Renault petrol vehicles.
Renault/Nissan Continental Diesel CAN
Software module for reading and writing ECUs fitted to Renault diesel vehicles with Continental ECUs.
Software module for reading and writing Nissan/Infiniti petrol vehicles with Hitachi Gen1 CAN ECUs.
Software module for reading and writing Nissan/Infiniti petrol vehicles with Hitachi RH850 UDS ECUs.
Mitsubishi
MMC Mitsubishi MH8XXX Petrol CAN
Software module for reading and writing Mitsubishi MH8XXX ECUs by CANbus used in Mitsubishi Motors Corp. (MMC) petrol vehicles.
GM
Software module for reading and writing ECUs fitted in GM diesel vehicles through the diagnostic connector.
Software module for reading and writing ECUs fitted in GM petrol vehicles with CAN-bus AC Delco Gen1 ECUs through the diagnostic connector.
Software module for reading and writing ECUs fitted in GM petrol vehicles with CAN-bus AC Delco Gen2 ECUs through the diagnostic connector.
VAG
Software module for reading and writing Magneti Marelli IAW 4HV / 7GV / 7GVE / 9GV ECUs.
Software module for working with Continental Simos12/18 ECUs used in VAG vehicles.
China
Software module for reading and writing petrol engine vehicles from the Chinese market fitted with Delphi ECUs.
Software module for reading and writing petrol engines vehicles from the Chinese market fitted with Siemens/Continental ECUs.
Software module for reading and writing petrol engine vehicles from the Chinese market fitted with Bosch ECUs.
Software module for reading and writing diesel engine vehicles from the Chinese market.
Moto/Extreme
Software module for reading and writing Delphi MT05 and Delphi MT05.2 ECUs through the diagnostic connector.
Software module for OBD/BENCH programming of various M3C ECUS
Software module for reading and writing Honda Marine Outboard engines with Keihin ECUs.
Software module for reading and writing Honda motorbikes, ATVs and other extreme vehicles with Keihin ECUs.
Software module for reflashing Honda motorbikes and scooters with Shindengen ECUs.
Software module for reading and writing Harley-Davidson Delphi ECUs
Software module for reading and writing Siemens MSE3.7x and Bosch ME17.8.5 ECUs through the diagnostic connector.
Software module writing Bosch MSE 3.0 and US6.0 control units. Virtual reading of original files via internet server.
Software module for identification and virtual reading and writing of Eldor ECUs used in motorcycles.
Moto/Extreme Denso Virtual Reader
Software module for identification and virtual reading of Denso SH7052 ECUs on Arctic Cat and Suzuki vehicles.
Software module for BENCH programming of Mitsubishi ECUs used in Suzuki Marine Outboards.
Software module for OBD reading and writing BMW Motorrad motorbikes with Bosch and Magneti Marelli ECUs.
Software module for reading and writing Polaris with Bosch ECUs.
Trucks/Industrial
Trucks/Industrial Bosch EDC17CV41
Software module for reading and writing by CAN-bus Bosch EDC17CV41 ECUs used in trucks/industrial vehicles Tata-Daewoo, New Holland, CASE, CLAAS, Iveco, Doosan.
Software module for reading and writing by CAN-bus Delphi DMCI ECUs used in DAF and Hyundai trucks.
Software module for reading and writing by CAN-bus Delphi ETC3 ECUs used in DAF Tatra, Kenworth, Peterbilt, Hyundai trucks.
Software module for BENCH reading and writing CAN-bus EMS ECUs used in Scania trucks
VAZ/UAZ
Software module for reading and writing by CAN-bus ECUs used in Lada/VAZ/UAZ petrol vehicles.
Universal
Software module for reading and writing electro, diesel and petrol vehicles with Denso SH72xxx CAN ECUs via BENCH MODE.
Software module for reading and writing Denso MPC BENCH-CAN.
Universal software module for OBD2/Bench reading and writing CAN bus Denso ECUs based on Renesas SH7058 and SH7059 MCUs.
Universal software module for Bench reading and writing of Bosch MEDC17 ECUs based on TriCore MCUs
Universal software module for Bench reading and writing of Bosch MG1/MD1 ECUs based on SPC and Aurix MCUs
BitBox FULL
Set of BitBox modules with all modules at this moment included.
Please contact us to buy this module!
Master/Slave
BitBox Slave initial purchace. Includes 1 dongle and subscription for 12 months. Available only for Master dongle owners
Subscription renewal for slave tools
