Tag: maps

Posted on by

BitSoftware Updates!

We can offer a 10% discount on BitBox and BitEdit software activations until 06-11-2018.

Use the coupon code BITX10 at checkout.

1. BitBox update ver3.0.9

New modules: 

BMW Motorrad module is now ready for tests with following families:

  • BMW BMSE (Marelli MBC1) with VR, writing, checksums calculations
  • BMW BMSK (ME9.2) with reading, writing and checksums
  • BMW BMSKP (ME9.2.0) with reading, writing and checksums

If you want to join the test – please contact us to sale@bitbox.ru

New families: 

  • China Bosch ME7.8.8 FAW now supported
  • Module Bosch MSE3.0 renamed to China Bosch Moto/Extreme, and Bosch US6.0 added with virtual reading, writing and checksums

Improvements and fixes:

  • Some fixes for Bosch MG1 BMW writing procedure
  • More variations of security added to China Bosch M7.8/ME7.8.8 BSL

 

2. BitEdit update 

We have an update for BitEdit with a lot of small interface and functional changes.

Also we have a new module: Kia/Hyundai Continental SIM2K-24x

bitbox_logo

 

BitBox – Software for reading and writing control unit memories.

 

 

BitEdit_logo

 

BitEdit – Software for editing calibrations within control unit maps.

 

 

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on by

BitEdit Honda Keihin Module Released

Module for editing and tuning of Honda Keihin ECUs with SH7058, SH72543, MPC5566 MCUs.

BitEdit Honda Keihin Screenshot 1

The following maps are available for editing:

  • Camshaft angle control (VTC)
  • Closed loop lambda
  • Injector opening time
  • WOT determining mode
  • Fuel compensations for temperature
  • Target lambda at High VTEC and Low VTEC
  • Idle speed control
  • Knock limits
  • Knock sensitivity
  • Knock retardation
  • Spark advance at High VTEC and Low VTEC
  • Throttle valve control
  • VTEC control
  • REV limiter

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Posted on by

New BitSoftware modules released!

The BitSoftware team have been hard at work developing some new modules!

A new module has been released for BitEdit:

Module for editing and tuning of Bosch ME17.8.5 ECUs.

BitEdit ME17.8.5 Screenshot 3

The following maps are available for editing:

  • Airmass flow calculation over throttle valve
  • Idle speed control
  • Enrichment and enleanment at acceleration and deacceleration
  • Injection timing control
  • Mixture control
  • Target lambda for knock protection
  • Spark advance optimal and base, advance correction
  • Ignition efficiency
  • Lambda efficiency
  • Optimal torque

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Also two new modules have been added to the BitBox flasher.

BitBox Rotax Extreme Flasher Module.

rotax

Siemens MSE 3.7x.

Allows identification, reading of full flash and writing of the calibrations areas by K-Line. It also supports automatic correction of checksums while writing.

Siemens MSE 3.7 with MCU ST10F269 and internal Flash memory 256Kb.

Siemens MSE 3.71 with MCU ST10F269 and internal Flash memory 256Kb.

Bosch ME17.8.5.

Allows identification, virtual reading of full flash (from internet server) and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

ECU is based on MCU Infineon Tricore TC1762 with internal Flash memory 1504Kb.

Click here for more info!

BitBox Chrysler / Dodge / Jeep Petrol Flasher Module.

ngc4-gpec2

Allows identification, reading of full flash and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

  • Motorola NGC3 MPC565 1Mb
  • Motorola NGC4 MPC5554 2Mb
  • Motorola NGC4A MPC5566 3Mb
  • Continental GPEC (SIM90) MPC561+EXT.FLASH 2Mb – beta version
  • Continental GPEC2 MPC5566 3Mb – beta version
  • Continental GPEC2A MPC5566 3Mb – in development, not yet released!

 
Click here for more info!

View Full Range of modules here.

bitbox_logo

 

Posted on by

New BitEdit modules released!

BitEdit Toyota Bosch Screenshot 2BitEdit have launched a new module for editing and tuning of Bosch EDC15, EDC16, EDC17 series for 1.4 and 1.6 D-4D Toyota engines.

The following maps are available for editing:

Airmass maps for EGR, thresholds for EGR, desired boost maps and boost limitation, boost pressure vnt control maps, injection time control, fuel quantity maps, conversion from torque to fuel, quantity limitation maps, target lambda for smoke limitations, rail pressure maps, rail pressure limitation, start of injection maps, and also torque limitation, requested torque, gearbox torque maps, and torque monitoring maps and values (for EDC17) etc… See screenshots for more info!

Click here for screenshots and more info!

 

 

BitEdit Arctic Cat Denso Screenshot 1Also another new module is available for editing files from normal aspirated and turbocharged Arctic Cat snowmobiles with Denso ECUs 32920-49Xxx based on MCU Renesas SH7052..

The following maps are available for editing:

Ignition angle, rpm limitation, injection time and enrichment calculation, boost pressure and limiters for boost, and also sensors calibration maps.

Click here for screenshots and more info!

 

View Full Range of modules here.

BitEdit_logo

 

Posted on by

BitEdit Toyota Petrol Turbo and Gearbox modules released!

BitEdit Toyota Denso Gearbox Screenshot 3

BitEdit have launched 3 new modules for editing Toyota Lexus Denso ECUs. BitEdit now supports petrol turbocharged vehicles and also allows editing of automatic gearbox TCUs.

The following maps are available for editing:

Spark advance maps for high and low octane fuel, minimal spark advance, spark advance corrections, VVT camshaft position maps, injection enrichment control, injection corrections, throttle valve control, requested torque, and all main sensors conversion curves.

Gear shift conditions up and down for different modes, desired shift time, oil pressure for shifting and main pressure, and oil temperature sensor conversion! Also DTC table is available

 

View Full Range of modules here.

BitEdit_logo

 

Posted on by

BitEdit Toyota Denso Petrol modules released!

BitEdit Toyota Petrol4 Screenshot 2

BitEdit have launched a new set of modules for editing Toyota Lexus petrol naturally aspirated vehicles with Denso ECUs and MCU NEC 76F00xx. 

The following maps are available for editing:

Spark advance maps for high and low octane fuel, minimal spark advance, spark advance corrections, VVT camshaft position maps, injection enrichment control, injection corrections, throttle valve control, requested torque, and all main sensors conversion curves.

Also packages of modules are now available at discounted rates!

 

View Full Range of modules here.

BitEdit_logo

 

Posted on by

BitBox and BitEdit now available!

The BitSoftware team are responsible for producing software packages designed for chiptuning beginners and professionals.

They currently offer 2 platforms:

bitbox_logo

 

BitBox – Software for reading and writing control unit memories.

 

 

BitEdit_logo

 

BitEdit – Software for editing calibrations within control unit maps.

 

 

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.