Tag: ECU

Posted on by

BitSoftware Promo!

13% discount available on BitBox and BitEdit software activations until 13-09-2019.

Use the coupon code bitsoft13 at checkout.


The BitSoftware team are responsible for producing software packages designed for chiptuning beginners and professionals.

They currently offer 2 platforms:

bitbox_logo

BitBox – Software for reading and writing control unit memories.

BitEdit_logo

BitEdit – Software for editing calibrations within control unit maps.

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on by

BitSoftware Updates!

We can offer a 10% discount on BitBox and BitEdit software activations until 06-11-2018.

Use the coupon code BITX10 at checkout.

1. BitBox update ver3.0.9

New modules: 

BMW Motorrad module is now ready for tests with following families:

  • BMW BMSE (Marelli MBC1) with VR, writing, checksums calculations
  • BMW BMSK (ME9.2) with reading, writing and checksums
  • BMW BMSKP (ME9.2.0) with reading, writing and checksums

If you want to join the test – please contact us to sale@bitbox.ru

New families: 

  • China Bosch ME7.8.8 FAW now supported
  • Module Bosch MSE3.0 renamed to China Bosch Moto/Extreme, and Bosch US6.0 added with virtual reading, writing and checksums

Improvements and fixes:

  • Some fixes for Bosch MG1 BMW writing procedure
  • More variations of security added to China Bosch M7.8/ME7.8.8 BSL

 

2. BitEdit update 

We have an update for BitEdit with a lot of small interface and functional changes.

Also we have a new module: Kia/Hyundai Continental SIM2K-24x

bitbox_logo

 

BitBox – Software for reading and writing control unit memories.

 

 

BitEdit_logo

 

BitEdit – Software for editing calibrations within control unit maps.

 

 

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on by

BitBox BMW Fxx ENET Module Released!

The BitSoftware team have released this new module which allows complete OBD flashing of BMW EDC17 / MEVD17 ECUs fitted in Fxx vehicles over ENET. 

Module allows:

  • Identification
  • Virtual Reading
  • Writing program and maps
  • Checksum and CVN fix on writing
  • Recovery with original file (as official BMW diagnostic system)
  • Reading and writing coding data
  • DTC reading / clearing

No need to dismount, open or drill the ECU – FULL OBD2 solution.

 

Supported Bosch ECUs

Bosch EDC17C41 (DDE7.2.1)
Bosch EDC17C50 (DDE7.0.1)
Bosch EDC17C56 (DDE7.4.1)
Bosch EDC17CP45 (DDE7.3.1)
Bosch EDC17CP49 (DDE7.5.1)
Bosch EDC17CP09 (DDE7.3a)
Bosch MEVD17.2
Bosch MEVD17.2.4
Bosch MEVD17.2.5
Bosch MEVD17.2.6
Bosch MEVD17.2.9
Bosch MEVD17.2.G (incl. S55)
Bosch MEVD17.2.8
Bosch MEVD17.2.H
Bosch MEVD17.2.3

 

More Info

 

View Full Range of modules here.

bitbox_logo

 

Posted on by

BitBox BMW Bosch EDC17 FULL OBD Module!

The BitSoftware team have been hard at work developing a new module which allows complete OBD flashing of BMW EDC17 ECUs fitted in Exx vehicles. 

It allows identification, virtual reading and writing of the calibrations areas, also supports automatic correction of checksums while writing.

No need to dismount, open or drill an ECU – FULL OBD2 solution.

 

Supported Bosch EDC17 ECUs

Bosch EDC17CP45 (DDE7.3.1)

Bosch EDC17CP02 (DDE7.1)

Bosch EDC17C06 (DDE7.0)

Bosch EDC17CP09 (DDE7.3)

Pre order NOW

 

View Full Range of modules here.

bitbox_logo

 

Posted on by

I/O Terminal Tool Updates

Bosch ECU TOOL v19 Released:

Volvo ME9.0 till year 2008 now supported
Read/Write M58W016DB Flash + 95080 Eeprom
Bench Mode / OBD Mode

Please note: Volvo OBD support requires the latest hardware or modification carried out to older versions of the hardware, for more info  >>Click Here<<

 

Marelli ECU TOOL v47 Released:

Fiat Magneti Marelli MJD 9DF CAN
Read/Write SPC5644 Flash + Read/Write 95128 Eeprom + Set Virgin
Requires new Marelli 2 license

Fiat Magneti Marelli 8GMK CAN
Read/Write SPC564A80B4 Flash + Read/Write 95640 Eeprom + Set Virgin
Requires new Marelli 2 license

 

Denso ECU TOOL v23 Released:

Subaru Outback 2.0D NG Denso CAN
Read/Write 64F7059 Flash + 93C86 Eeprom

Mazda 6 2.2TD R2AC Denso CAN
Read/Write 64F7058 Flash + 93C86 Eeprom

Jaguar S-Type 4.2 V8 V8SC Denso
Read/Write 64F7058 Flash + 93A86 Eeprom

 

New PSA BSI ECUs added to Multitool:

Johnson Controls SPC560B60+95128 CAN (BSI04EV2-KEX)
Read/Write 95128 Eeprom, Show PIN, Read/Write SPC560B60 Flash

Valeo SC667152+95256 CAN (BSI-N0X-00)
Read/Write 95256 Eeprom, Show PIN, Read/Write SC667152 Flash

 

For more info and a list of supported ECU’s, please visit the product page here.

 

 

Posted on by

I/O Terminal Tool Updates + New Multitool Plugin!

Bosch ECU TOOL v18 Released:

Opel/GM Bosch ME7.9.9 ST10F275 K-Line
Read/Write ST10F275 Flash + 95080 Eeprom

 

Siemens ECU TOOL v52 Released:

Volvo Siemens EMS2000 29F200BB
Read/Write 29F200BB Flash + Emulated Eeprom + Make Virgin

Volvo Siemens EMS2000 29F400BB
Read/Write 29F400BB Flash + Emulated Eeprom + Make Virgin

 

Denso ECU TOOL v22 Released:

VOLVO V70/S60/S80 140/170hp DENSO LE2 64F7055+29LV200BC 500kbps CAN
Read/Write 647055 Flash + 29LV200BC Flash + 93C56 Eeprom
Bench Mode / OBD Mode

VOLVO V70/S60/S80 140/170hp DENSO HN2 64F7055+29LV200BC CAN
Read/Write 647055 Flash + 29LV200BC Flash + 93C56 Eeprom
Bench Mode / OBD Mode

VOLVO V70/S60/S80 140/170hp DENSO HP2 64F7055 CAN
Read/Write 647055 Flash + 93C56 Eeprom
Bench Mode / OBD Mode

Please note: Volvo OBD support requires the latest hardware or modification carried out to older versions of the hardware, for more info  >>Click Here<<

 

New Multitool Plugin Released:

multitool

This plugin can offer functions that normally would normally require the ECU to be opened and a BDM/Boot programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available).

It currently works with PSA BSI units, Smart SAM units and VAG DSG .

All operations are done over K-line or CAN bus without need to open ECU!

Buy Now

 

Supported PSA BSI ECUs:

  1. Siemens D76F0018+95160 KLINE (BSI-E0X-00/BSI-F0X-00) – EEPROM 95160 R/W , show PIN
  2. Siemens 1L00M+95128/95256 CAN (BSI-S0X-00) – EEPROM 95128/95256  R/W, show PIN, 9S12DP512 FLASH R/W
  3. Continental SC667050+95256 CAN (BSI-Q0X-00) – EEPROM 95256 R/W, show PIN, SC667050 FLASH R/W
  4. Valeo 4L00M+95128/25128 CAN (BSI2004-P0X-00) – EEPROM 95128/25128 R/W, show PIN, 9S12DP512 FLASH R/W
  5. Valeo 2M48H+24C128 CAN (BSIEV-X0X-00) – EEPROM 24C128 R/W, show PIN, 9S12XEP768 FLASH R/W
  6. Johnson Controls easyCAN4+29LV400+95128 CAN (BSI2004-H0X) – EEPROM 95128 R/W, show PIN, 29LV400BB FLASH R/W
  7. Johnson Controls easyCAN4F1M-32+95128 CAN (BSI04EV-K0X) – EEPROM 95128 R/W, show PIN, easyCAN4F1M-32 FLASH R/W

Supported SMART SAM ECUs:

  1. 3L80R (MC9S12B128) CAN – EEPROM R/W, FLASH R/W
  2. 0L01Y (MC9S12DG256) CAN – EEPROM R/W, FLASH R/W
  3. 2K79X (MC9S12DG256) CAN – EEPROM R/W, FLASH R/W

Supported VAG DSG ECUs:

  1. TEMIC DQ250 MPC555+95160 KLINE – EEPROM 95160 R/W, MPC555 FLASH R/W

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Bosch V17 Update

Bosch ECU TOOL v17 Released:

Volvo Bosch EDC16C31 29bit CAN until year 2008 / XC90 until 2012
Read/Write M58BW016DB Flash + 95320 Eeprom
Bench Mode / OBD Mode

Volvo Bosch EDC16C34 29bit CAN  S40/V50/C30 until 2008 (1.6L)
Read/Write M58BW016DB Flash + 95160 Eeprom
Bench Mode / OBD Mode

Please note: Volvo OBD support requires the latest hardware or modification carried out to older versions of the hardware, for more info  >>Click Here<<

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

BitEdit Honda Keihin Module Released

Module for editing and tuning of Honda Keihin ECUs with SH7058, SH72543, MPC5566 MCUs.

BitEdit Honda Keihin Screenshot 1

The following maps are available for editing:

  • Camshaft angle control (VTC)
  • Closed loop lambda
  • Injector opening time
  • WOT determining mode
  • Fuel compensations for temperature
  • Target lambda at High VTEC and Low VTEC
  • Idle speed control
  • Knock limits
  • Knock sensitivity
  • Knock retardation
  • Spark advance at High VTEC and Low VTEC
  • Throttle valve control
  • VTEC control
  • REV limiter

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Posted on by

New BitSoftware modules released!

The BitSoftware team have been hard at work developing some new modules!

A new module has been released for BitEdit:

Module for editing and tuning of Bosch ME17.8.5 ECUs.

BitEdit ME17.8.5 Screenshot 3

The following maps are available for editing:

  • Airmass flow calculation over throttle valve
  • Idle speed control
  • Enrichment and enleanment at acceleration and deacceleration
  • Injection timing control
  • Mixture control
  • Target lambda for knock protection
  • Spark advance optimal and base, advance correction
  • Ignition efficiency
  • Lambda efficiency
  • Optimal torque

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Also two new modules have been added to the BitBox flasher.

BitBox Rotax Extreme Flasher Module.

rotax

Siemens MSE 3.7x.

Allows identification, reading of full flash and writing of the calibrations areas by K-Line. It also supports automatic correction of checksums while writing.

Siemens MSE 3.7 with MCU ST10F269 and internal Flash memory 256Kb.

Siemens MSE 3.71 with MCU ST10F269 and internal Flash memory 256Kb.

Bosch ME17.8.5.

Allows identification, virtual reading of full flash (from internet server) and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

ECU is based on MCU Infineon Tricore TC1762 with internal Flash memory 1504Kb.

Click here for more info!

BitBox Chrysler / Dodge / Jeep Petrol Flasher Module.

ngc4-gpec2

Allows identification, reading of full flash and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

  • Motorola NGC3 MPC565 1Mb
  • Motorola NGC4 MPC5554 2Mb
  • Motorola NGC4A MPC5566 3Mb
  • Continental GPEC (SIM90) MPC561+EXT.FLASH 2Mb – beta version
  • Continental GPEC2 MPC5566 3Mb – beta version
  • Continental GPEC2A MPC5566 3Mb – in development, not yet released!

 
Click here for more info!

View Full Range of modules here.

bitbox_logo

 

Posted on by

New BitEdit modules released!

BitEdit Toyota Bosch Screenshot 2BitEdit have launched a new module for editing and tuning of Bosch EDC15, EDC16, EDC17 series for 1.4 and 1.6 D-4D Toyota engines.

The following maps are available for editing:

Airmass maps for EGR, thresholds for EGR, desired boost maps and boost limitation, boost pressure vnt control maps, injection time control, fuel quantity maps, conversion from torque to fuel, quantity limitation maps, target lambda for smoke limitations, rail pressure maps, rail pressure limitation, start of injection maps, and also torque limitation, requested torque, gearbox torque maps, and torque monitoring maps and values (for EDC17) etc… See screenshots for more info!

Click here for screenshots and more info!

 

 

BitEdit Arctic Cat Denso Screenshot 1Also another new module is available for editing files from normal aspirated and turbocharged Arctic Cat snowmobiles with Denso ECUs 32920-49Xxx based on MCU Renesas SH7052..

The following maps are available for editing:

Ignition angle, rpm limitation, injection time and enrichment calculation, boost pressure and limiters for boost, and also sensors calibration maps.

Click here for screenshots and more info!

 

View Full Range of modules here.

BitEdit_logo