-
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is mandatory for use.
Overview:MASTER bFlash, bDiag, bLog, bSpy software plugins
** NOW with bTrace LIVE tuning included! **
- Read/write master open binary files
- OBD, BENCH, BOOT, BDM, JTAG protocols
- Hardware interface and USB cable
- OBD cable + OBD Y-cable
- Direct ECU + TCU cables, tripod + boot pin
- 12V Power supply (Multi plug UK/EU/AU/US)
- Heavy duty carry case
- Supported ECU list here
Upcoming plugins available at extra cost upon release: bManager, bCloud
-
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is mandatory for use.
Overview:SLAVE bFlash, bDiag, bLog, bSpy software plugins
- Read/write files from the linked Master ONLY
- OBD, BENCH, BOOT, BDM, JTAG protocols
- Hardware interface and USB cable
- OBD cable + OBD Y-cable
- Direct ECU + TCU cables, tripod + boot pin
- 12V Power supply (Multi plug UK/EU/AU/US)
- Heavy duty carry case
- Supported ECU list here
-
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 200 euros. A valid subscription is mandatory for use.
This package includes the initial setup of the slave account, the USB dongle and subscription. For subscription renewal click here -
MASTER tool, reads/writes open BIN files. This tool has no annual fees. Updates and technical support are free!
For full module info see:
BitBox Module List
BitEdit Module List
-
Sale!MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 1100 CHF. A valid subscription is mandatory for use.
- OBD K-Line, CANBUS, DoIP ENET
- VAG FRF/ODX/SGO flasher
- BOOT/BENCH Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
- Motorola BDM - MPC5xx
- Read and write unencrypted RAW BIN files
- High current Power supply suitable for BOOT, BENCH and BDM
- One year free subscription
-
Sale!SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 1100 CHF. A valid subscription is mandatory for use.
- OBD K-Line, CANBUS, DoIP ENET
- VAG FRF/ODX/SGO flasher
- BOOT/BENCH Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
- Motorola BDM - MPC5xx
- Read and write encrypted SLAVE files
- High current Power supply suitable for BOOT, BENCH and BDM
- One year free subscription
- NEW! Unrestricted slave option allows user to work any master (At additional cost, see product options)
-
MASTER tool, reads/writes open BIN files. This tool uses a subscription model for updates, support and online services. The first year is included, value 600-1000 euros, depending on tool configuration. A valid subscription is mandatory for use.
Available in the following configurations:- DFOX START: OBD CARS/MOTO
- DFOX HEAVY: OBD TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
MASTER tool, reads/writes open BIN files. This tool uses a subscription model for updates, support and online services. The first year is included, value 600-1000 euros, depending on tool configuration. A valid subscription is mandatory for use.
Included protocols: DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS For DFOX CUSTOM >>CLICK HERE<<
ADDITIONAL PACKAGES: PRO:- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
SLAVE tool, works in conjunction with a linked Master. This tool uses a subscription model for updates, support and online services. The first year is included, value 500-800 euros, depending on tool configuration. A valid subscription is mandatory for use.
Available in the following configurations:- DFOX START: OBD CARS/MOTO
- DFOX HEAVY: OBD TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
SLAVE tool, works in conjunction with a linked Master. This tool uses a subscription model for updates, support and online services. The first year is included, value 500-800 euros, depending on tool configuration. A valid subscription is mandatory for use.
Included protocols: DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS For DFOX CUSTOM >>CLICK HERE<<
ADDITIONAL PACKAGES: PRO:- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
SLAVE tool, works in conjunction with a WinOLS software. This tool has no annual fees. Updates and technical support are free!
-
SLAVE tool, works in conjunction with a WinOLS software. This tool has no annual fees. Updates and technical support are free!
-
Sale!MASTER tool, reads/writes files in .HPT format, compatible with VCM Editor. VCM Scanner - Diagnostic and advanced real time data logger tool, which is completely free! VCM Editor - Flash tool and editor functions operate on a credit based licensing system.
Credits are used as currency to purchase licenses for the different modules and licensing a module gives you the ability to tune it. The number of credits necessary to purchase a license varies depending on the vehicle. You can find a complete list of supported vehicles and credit costs here.