Tag: write

Posted on by

New BitEdit modules released!

BitEdit Toyota Bosch Screenshot 2BitEdit have launched a new module for editing and tuning of Bosch EDC15, EDC16, EDC17 series for 1.4 and 1.6 D-4D Toyota engines.

The following maps are available for editing:

Airmass maps for EGR, thresholds for EGR, desired boost maps and boost limitation, boost pressure vnt control maps, injection time control, fuel quantity maps, conversion from torque to fuel, quantity limitation maps, target lambda for smoke limitations, rail pressure maps, rail pressure limitation, start of injection maps, and also torque limitation, requested torque, gearbox torque maps, and torque monitoring maps and values (for EDC17) etc… See screenshots for more info!

Click here for screenshots and more info!

 

 

BitEdit Arctic Cat Denso Screenshot 1Also another new module is available for editing files from normal aspirated and turbocharged Arctic Cat snowmobiles with Denso ECUs 32920-49Xxx based on MCU Renesas SH7052..

The following maps are available for editing:

Ignition angle, rpm limitation, injection time and enrichment calculation, boost pressure and limiters for boost, and also sensors calibration maps.

Click here for screenshots and more info!

 

View Full Range of modules here.

BitEdit_logo

 

Posted on by

BitEdit Toyota Petrol Turbo and Gearbox modules released!

BitEdit Toyota Denso Gearbox Screenshot 3

BitEdit have launched 3 new modules for editing Toyota Lexus Denso ECUs. BitEdit now supports petrol turbocharged vehicles and also allows editing of automatic gearbox TCUs.

The following maps are available for editing:

Spark advance maps for high and low octane fuel, minimal spark advance, spark advance corrections, VVT camshaft position maps, injection enrichment control, injection corrections, throttle valve control, requested torque, and all main sensors conversion curves.

Gear shift conditions up and down for different modes, desired shift time, oil pressure for shifting and main pressure, and oil temperature sensor conversion! Also DTC table is available

 

View Full Range of modules here.

BitEdit_logo

 

Posted on by

I/O Terminal Tool Bosch V13 Update

Bosch ECU TOOL v13 Released:

Opel Bosch ME7.6.1 K-Line
Read/Write 29F800BB Flash + 95080 Eeprom + Reset to Virgin Mode + Change VIN/Mileage

Opel Bosch ME7.6.1 K-Line
Read/Write ST10F275 Flash + 95080 Eeprom + Reset to Virgin Mode + Change VIN/Mileage

Opel Bosch ME7.6.2 K-Line
Read/Write 29F800BB Flash + 95080 Eeprom + Reset to Virgin Mode + Change VIN/Mileage

Opel Bosch ME7.6.2 K-Line
Read/Write ST10F275 Flash + 95080 Eeprom + Reset to Virgin Mode + Change VIN/Mileage

Opel Bosch ME7.6.3 K-Line
Read/Write ST10F275 Flash + 95080 Eeprom + Reset to Virgin Mode + Change VIN/Mileage

Hyundai / Kia Bosch/KEFICO M(G)7.9.8 K-Line – 
Read/Write ST10F275 Flash + 95160 Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

BitEdit Toyota Denso Petrol modules released!

BitEdit Toyota Petrol4 Screenshot 2

BitEdit have launched a new set of modules for editing Toyota Lexus petrol naturally aspirated vehicles with Denso ECUs and MCU NEC 76F00xx. 

The following maps are available for editing:

Spark advance maps for high and low octane fuel, minimal spark advance, spark advance corrections, VVT camshaft position maps, injection enrichment control, injection corrections, throttle valve control, requested torque, and all main sensors conversion curves.

Also packages of modules are now available at discounted rates!

 

View Full Range of modules here.

BitEdit_logo

 

Posted on by

I/O Terminal Tool Bosch V12 Update

Bosch ECU TOOL v12 Released:

Fiat Bosch ME7.6.3 K-Line
Read/Write ST10F276 Flash + 95080 Eeprom + Reset to Virgin Mode

Fiat Bosch ME7.9.10 K-Line
Read/Write ST10F275 Flash + 95160 Eeprom + Reset to Virgin Mode

Smart Bosch ME7.7.0 K-Line
Read/Write ST10F275 Flash + 95080 Eeprom

Smart Bosch EDG15C-5.x K-line
Read/Write 29F400BT Flash + 95P08 Eeprom

VAG Bosch ME7.5.20 K-Line
Read/Write ST10F275 Flash + 95040 Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Bosch V11 – Volvo OBD support!

Bosch ECU TOOL v11 Released:

Volvo Bosch ME7.0/ME7.0.1 250/500kbps CAN – OBD support added!
Read/Write 29F800BB Flash + 95P08 Eeprom

Volvo Bosch EDC15C11 CAN – OBD support added!
Read/Write 29F400BT Flash + 95P08 Eeprom

Volvo Bosch EDC16C31 29bit CAN until year 2008 – OBD / Bench mode
Read/Write M58BW0160 Flash (95320 Eeprom not yet supported!)

Opel Bosch EDC15C7 K-line:
Read/Write 29F400BT Flash + 95P08 Eeprom

 

Please note: Volvo OBD support requires hardware modification, for more info  >>Click Here<<

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

BitBox and BitEdit now available!

The BitSoftware team are responsible for producing software packages designed for chiptuning beginners and professionals.

They currently offer 2 platforms:

bitbox_logo

 

BitBox – Software for reading and writing control unit memories.

 

 

BitEdit_logo

 

BitEdit – Software for editing calibrations within control unit maps.

 

 

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on by

I/O Terminal Tool Marelli V46 / Denso V21 Released

Marelli ECU TOOL v46 Released:

Suzuki Magneti Marelli 8DS CAN
Read/Write MPC5565Flash + 95640 Eeprom

Denso ECU TOOL v21 Released:

Landrover / Range Rover AJ33 4.2 CAN
Read/Write 64F7058 + 93A86 Eeprom

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Marelli V45 Released

Marelli ECU TOOL v45 Released:

Fiat Magneti Marelli IAW 5SF.XX K-line
Read/Write ST10F280 Flash + Emulated Eeprom + Change odometer

Fiat Magneti Marelli IAW 5SF4 K-line
Read/Write ST10F296 Flash + Emulated Eeprom + Change odometer

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Bosch V8 Released

Bosch ECU TOOL v8 Released:

Volvo Bosch ME7.0 CAN:
Read/Write 29F800BB Flash + 95P08 Eeprom
Fix flash CRC

Toyota Bosch EDC15C9 K-line:
Read/Write 29F400BT Flash + 95P08 Eeprom

ECU wiring diagrams updated

For more info and a list of supported ECU’s, please visit the product page here.