read – Page 5 – Chiptuningshop

Posted on January 20, 2016January 21, 2016 by CTS Admin

New BitEdit modules released!

BitEdit have launched a new module for editing and tuning of Bosch EDC15, EDC16, EDC17 series for 1.4 and 1.6 D-4D Toyota engines.

The following maps are available for editing:

Airmass maps for EGR, thresholds for EGR, desired boost maps and boost limitation, boost pressure vnt control maps, injection time control, fuel quantity maps, conversion from torque to fuel, quantity limitation maps, target lambda for smoke limitations, rail pressure maps, rail pressure limitation, start of injection maps, and also torque limitation, requested torque, gearbox torque maps, and torque monitoring maps and values (for EDC17) etc… See screenshots for more info!

Click here for screenshots and more info!

Also another new module is available for editing files from normal aspirated and turbocharged Arctic Cat snowmobiles with Denso ECUs 32920-49Xxx based on MCU Renesas SH7052..

The following maps are available for editing:

Ignition angle, rpm limitation, injection time and enrichment calculation, boost pressure and limiters for boost, and also sensors calibration maps.

Click here for screenshots and more info!

View Full Range of modules here.

Posted on December 5, 2015December 5, 2015 by CTS Admin

BitEdit Toyota Petrol Turbo and Gearbox modules released!

BitEdit have launched 3 new modules for editing Toyota Lexus Denso ECUs. BitEdit now supports petrol turbocharged vehicles and also allows editing of automatic gearbox TCUs.

The following maps are available for editing:

Spark advance maps for high and low octane fuel, minimal spark advance, spark advance corrections, VVT camshaft position maps, injection enrichment control, injection corrections, throttle valve control, requested torque, and all main sensors conversion curves.

Gear shift conditions up and down for different modes, desired shift time, oil pressure for shifting and main pressure, and oil temperature sensor conversion! Also DTC table is available

View Full Range of modules here.

Posted on October 29, 2015October 29, 2015 by CTS Admin

BitEdit Toyota Denso Petrol modules released!

BitEdit have launched a new set of modules for editing Toyota Lexus petrol naturally aspirated vehicles with Denso ECUs and MCU NEC 76F00xx.

The following maps are available for editing:

Also packages of modules are now available at discounted rates!

View Full Range of modules here.

Posted on September 19, 2015October 29, 2015 by CTS Admin

BitBox and BitEdit now available!

The BitSoftware team are responsible for producing software packages designed for chiptuning beginners and professionals.

They currently offer 2 platforms:

BitBox – Software for reading and writing control unit memories.

BitEdit – Software for editing calibrations within control unit maps.

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on June 22, 2015November 4, 2015 by CTS Admin

Bosch Plugin for I/O Terminal Tool

The ultimate tool for Bosch ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a BDM/Boot programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It works with Bosch ECU’s for Chrysler, Citroen, Fiat, Honda, Hyundai, Jeep, Kia, Mercedes Benz, Peugeot, Smart, Toyota, VAG, and Volvo.

All operations are done over K-line without need to open ECU!

Buy Now

Supported ECU’s:

CHRYSLER Bosch EDC15C5 K-Line – Read/Write Flash + Eeprom

FIAT Bosch ME7.3.1 K-Line BOOTPIN – Read/Write Flash + Eeprom
FIAT Bosch ME7.3.H4 K-Line BOOTPIN – Read/Write Flash + Eeprom
FIAT Bosch ME7.6.3 K-Line – Read/Write Flash + Eeprom + Reset to Virgin Mode
FIAT Bosch ME7.9.10 K-Line – Read/Write Flash + Eeprom + Reset to Virgin Mode

HONDA Bosch ME7.9.3 K-Line – Read/Write Flash + Eeprom
HONDA Bosch EDC15C7 K-Line – Read/Write Flash + Eeprom

HYUNDAI / KIA Bosch/KEFICO ME7.9.0 K-Line – Read/Write Flash + Eeprom
HYUNDAI / KIA Bosch/KEFICO M(G)7.9.8 K-Line – Read/Write Flash + Eeprom
HYUNDAI / KIA Bosch EDC15C7 K-Line – Read/Write Flash + Eeprom

JEEP Bosch EDC15C5 K-Line – Read/Write Flash + Eeprom

MERCEDES BENZ Bosch EDC15C6 K-Line – Read/Write Flash + Eeprom

OPEL Bosch ME155/ME76H4 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME763 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch EDC15C7 K-line – Read/Write 29F400BT Flash + 95P08 Eeprom

PSA Bosch M7.4.4 K-Line – Read/Write Flash + Eeprom
PSA Bosch ME7.4.4 K-Line – Read/Write Flash + Eeprom, Reset to Virgin Mode
PSA Bosch ME7.4.5 K-Line – Read/Write Flash + Eeprom, Reset to Virgin Mode
PSA Bosch EDC15C2 (1 X Plug) K-Line – Read/Write Flash + Eeprom

SMART Bosch ME7.7.0 K-Line – Read/Write Flash + Eeprom
SMART Bosch EDG15C-5.x K-Line – Read/Write Flash + Eeprom

TOYOTA Bosch ME7.9.5 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch ME7.9.51 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch M7.9.5 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch M7.9.52 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch EDC15C9 K-Line – Read/Write Flash + Eeprom

VAG Bosch ME7.5 K-Line – Read/Write Flash + Eeprom
VAG Bosch ME7.5 1M K-Line – Read/Write Flash + Eeprom
VAG Bosch ME7.5.10 K-Line – Read/Write Flash + Eeprom
VAG Bosch MED7.5.11 K-Line – Read/Write Flash + Eeprom
VAG Bosch MED7.5.20 K-Line – Read/Write Flash + Eeprom
VAG Bosch EDC15P+ K-Line – Read/Write Flash + Eeprom
VAG Bosch EDC15VM+ K-Line – Read/Write Flash + Eeprom

VOLVO Bosch EDC15C3 K-Line – Read/Write Flash + Eeprom
VOLVO Bosch EDC15C11 CAN/K-Line – Read/Write Flash + Eeprom
VOLVO Bosch ME7.0 CAN – Read/Write Flash + Eeprom + Flash CRC Fix
VOLVO Bosch EDC16C31 29bit CAN until year 2008 – Read/Write M58BW0160 Flash (95320 Eeprom not yet supported!)
Please note: Volvo OBD support requires latest hardware, or older hardware to be modified, for more info >>Click Here<<

Posted on February 12, 2015February 12, 2015 by CTS Admin

I/O Terminal Tool Siemens V50 + Denso V19 Update

Siemens ECU TOOL v50 Released:

VAG Siemens SIMOS 3PE – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PD – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PG – Read/Write Flash + Eeprom

KIA/HYUNDAI Siemens/Continental SIMK41 – Read/Write Flash + Emulated Eeprom

KIA/HYUNDAI Siemens/Continental SIM2K-48 – Read/Write Flash + Emulated Eeprom

Denso ECU TOOL v19 Released:

Correction made on Suzuki Swift 1.3 with 64F7055 processor

ECU wiring diagrams updated

For more info and a list of supported ECU’s, please visit the product page here.

Posted on January 17, 2015January 17, 2015 by CTS Admin

I/O Terminal Tool Siemens ECU Tool V49 Released

Siemens ECU TOOL v49 Released:

VAG Siemens SIMOS 3PA – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PB – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PC – Read/Write Flash + Eeprom

VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

ECU wiring diagrams updated

For more info and a list of supported ECU’s, please visit the product page here.

Posted on January 6, 2015January 17, 2015 by CTS Admin

I/O Terminal Tool Siemens ECU Tool V48 Released

Siemens ECU TOOL v48 Released:

OPEL BOSCH ME155/ME76H4 Kline- Read/Write Flash + Eeprom, Change VIN/Mileage

OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage

Change VIN/Mileage function added to OPEL ME761/ME762

Some changes made in Opel/SAAB Trionic 8 ECUs software

Free for all owners of Siemens License.

ECU wiring diagrams updated

For more info and a list of supported ECU’s, please visit the product page here.

Posted on December 19, 2014January 17, 2015 by CTS Admin

I/O Terminal Tool Denso V16 / Siemens ECU Tool V47 Released

DENSO ECU TOOL v16 Released:

Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56 eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Free for all owners of Denso License.

Siemens ECU TOOL v47 Released:

OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom

OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Free for all owners of Siemens License.

For more info and a list of supported ECU’s, please visit the product page here.

Posted on December 19, 2014July 5, 2015 by CTS Admin

Introducing I/O Terminal Tool

We are proud to announce the I/O Terminal Tool is now available at Chiptuningshop!

The I/O Terminal tool can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

It also supports some very tricky controllers which are not covered by other tools.

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

All operations are done over K-line or CAN bus without need to open ECU!

It currently supports Bosch, Easytronic, Denso, Marelli, and Siemens ECU’s. For more info click the desired plugin below:

Buy Now