Tag: bTrace

Posted on by

bFlash Update V2003B

Support for MG1/MD1 with tuning protection level 7 & 8!

From now MG1CS011 with TC298 is supported!

Also some additional types of MEDC17 have been added. 

Q&A

How fast is it?
The write time is around 20 seconds.
Reading takes around 1 minute. 

 

How do I connect to the ECU?
You can use the help function in bFlash and it will show you the pinout of the ECU.

 

Can I clone the ECU?
No, full ECU cloning is not possible but you have full flash & Internal EEPROM access.

 

What control units are included in this bFlash update?
You can find the full list of control units below.

New BENCH Protocols:

ASTON MARTIN
Bosch ME17.8.31 TC1797

DEUTZ
Bosch EDC17CV56 TC1767

FENDT
Bosch EDC17CV56 TC1767

MERCEDES BENZ
Bosch MED17.7.3.1 TC1793

POLARIS
ME17.9.74 TC1762

PORSCHE
Bosch EDC17CP54 TC1793

SEAT
Bosch MG1CS011 TC298

SKODA
Bosch MG1CS011 TC298

VW
Bosch MG1CS011 TC298
Bosch EDC17CP54 TC1793

More Info
Posted on by

bFlash Update V2003A

Magnetti Marelli BENCH Protocols!

These new protocols allow read and write of the ECU’s found below

Q&A

How fast is it?
The write time is around 30 seconds to a few minutes depending on file.
Reading takes around 3 to 6 minutes. 

 

How do I connect to the ECU?
You can use the help function in bFlash and it will show you the pinout of the ECU.

 

Can I clone the ECU?
Yes, full ECU cloning is possible. Full flash & External SPI EEPROM access.

 

What control units are included in this bFlash update?
You can find the full list of control units below.

New BENCH Protocols:

ABARTH
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640
Marelli 8GML MPC5640

ALFA ROMEO
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640
Marelli 8GML MPC5640
Marelli GSF MPC5565
Marelli 9GF MPC5640
Marelli 8F3 MPC5565
Marelli 9DF MPC5644

FIAT
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640
Marelli 8GML MPC5640
Marelli GSF MPC5565
Marelli 9GF MPC5640
Marelli 8F3 MPC5565
Marelli 9DF MPC5644

LANCIA
Marelli 8GML MPC5640
Marelli GSF MPC5565
Marelli 9GF MPC5640
Marelli 8F3 MPC5565
Marelli 9DF MPC5644

JEEP
Marelli 8GMK MPC5640
Marelli 8GML MPC5640

More Info
Posted on by

bFlash Update V2002C – MB Delphi

Mercedes Delphi Full OBD solution (no unlock required!)

All versions of CRD3.X (TC1797) and CRD3.Y (TC1793) are covered by this update.

Flash counter is not incremented.
Long range customers & out of car programming? BENCH supported as well!

This is a public beta, please use with caution and report us any potential errors.

Q&A

How fast is it?
(OBD) Reading is a True Read and takes around 5 to 10 minutes depending on software version and gateway.
(OBD) Writing is "sector specific programming", The write time of your tuning file is around 1 minute and 30 seconds.

 

How do I connect to the ECU?
(OBD) You connect directly through the OBD socket.
(BENCH) Please follow the instructions in the "help" section in your bFlash

 

What control units are included in this bFlash update?
You can find the full list of control units below.
(CRD2.X will be added in an upcoming update.)

New OBD/BENCH Protocols:

Mercedes-Benz
Delphi CRD3.X TC1797
Delphi CRD3.Y TC1793

More Info
Posted on by

bFlash Update V2002A / V2002B

PSA Delphi DCM7.1A + Valeo VD56 Added.

This update includes a new OBD solution for DCM7.1!

That’s not all, also BOOT protocol for the latest 1.2 THP’s with gasoline particle filter (GPF) fitted to EB2ADT 110 HP, EB2ADTS 130 HP & EB2ADTX 155 H!

Q&A

How fast is it ?

DCM7.1A: Reading is a Virtual Read in a matter of seconds
The write time of the first flash is around 15 minutes.
Next flash is around 6 minutes 30 seconds.

VD56: Reading is a Full Read (Flash & Internal EEPROM) and takes around 50 seconds
The write time of the first flash is around 20 to 40 seconds.

 

How do I connect to the ECU?

DCM7.1A: You connect directly to the OBD socket.

VD56: A specific probe kit is required for connection, which can be ordered >>here<<

 

Do I need a battery charger?
Please note that a battery charger with at least 13.0 Volts is mandatory!

 

What control units are included in this bFlash update?
You can find the full list of control units below.

New OBD Protocols:

Peugeot

DCM7.1A TC297

Citroën

DCM7.1A TC297

DS

DCM7.1A TC297

Opel

DCM7.1A TC297

[/fusion_content_box][/fusion_content_boxes]

New BOOT Protocols:

Peugeot

Valeo VD56 TC297

Citroën

Valeo VD56 TC297

DS

Valeo VD56 TC297

Opel

Valeo VD56 TC297

More Info
Posted on by

bFlash Update V2001B – DSG OBD Protocols!

VAG GEARBOX SOLUTION BY OBD!

Not just a Virtual Read, but a real full read of your favourite gearboxes, it’s time to explore! Have fun.

Q&A

Do I need to buy an extra bFlash module?
Of course not! This protocol is active now, for all our active users.

 

How fast is it ?
The calibration write time is around 40 seconds.
Reading is a REAL Read and takes about 4 min 30 seconds

 

How do I connect to the TCU?
You connect directly to the OBD socket.

 

What control units (TCU's) are included in this bFlash update?
You can find the full list of control units below.

New OBD Protocols:

AUDI
DQ200.MQB TC1766
DQ200.g2 TC1784
DQ250.MQB TC1766

SEAT
DQ200.MQB TC1766
DQ200.g2 TC1784
DQ250.MQB TC1766

SKODA
DQ200.MQB TC1766
DQ200.g2 TC1784
DQ250.MQB TC1766

VOLKSWAGEN
DQ200.MQB TC1766
DQ200.g2 TC1784
DQ250.MQB TC1766

More Info
Posted on by

bFlash Update V2001A – Renault Temic Protocols!

TEMIC XPS6.G3 by OBD or BENCH!

Lead the transmission tuning on the fastest French hatchback by tuning its dual clutch gearbox – the XPS6 generation 3.

Q&A

How fast is it?
OBD read : Reading is a Virtual Read in a matter of seconds
OBD write : The write time of the calibration is around 58 seconds
BENCH read: Full read is around 1 min 30 seconds
BENCH write : Full write in a matter of seconds

 

What area can be programmed?
OBD : You can program the calibration (map) area
BENCH : You can program any area including EEPROM

 

How do I connect to the TCU?
OBD : You connect directly through the OBD socket
BENCH : We produce a specific TCU connector that can be purchased here

 

What control units (TCU's) are included in this bFlash update?
You can find the full list of control units below.

New OBD/BENCH Protocols:

 

RENAULT
TEMIC XPS6.G3 TC1746

More Info
Posted on by

bFlash Update V1912B – PCR2.1 full OBD!

VAG PCR2.1 full OBD!!

This protocol allows virtual reading and writing of the engine(s) found below:

1.6 TDI (VAG)

Q&A

How do I connect to the ECU?
You connect directly through the OBD socket.

 

How fast is it ?
The write time is around 6 min for the first time.
Next calibration update is done in 50 seconds.
Reading is a Virtual Read in a matter of seconds.
Back to stock function is available!

 

What control units (TCU's) are included in this bFlash update?
You can find the full list of control units below.

New OBD Protocols:

AUDI
SIEMENS PCR2.1

SEAT
SIEMENS PCR2.1

SKODA
SIEMENS PCR2.1

VOLKSWAGEN
SIEMENS PCR2.1

More Info
Posted on by

bFlash Update V1912A – Porsche SDI21 full OBD!

Porsche SDI21 full OBD!!

This protocol allows virtual reading and writing of the engine(s) found below:

4 cyl : 2.0T & 2.5T (718)
6 cyl : 3.0T & 3.8T (991.2)
Also includes the new 991.2 GT2RS

Q&A

How do I connect to the ECU?
You connect directly through the OBD socket.

 

Do I need to unlock the ECU first?
No BOOT or BENCH unlock is required. Unlock is done over OBD!

 

How fast is it ?
Reading is a Virtual Read in a matter of seconds.
The write time is around 7 min.(approx) for the first time.
Next calibration update is done in 1 min. 30 seconds. (approx)

 

Can I use file read with other tools?
As a dummy proof protection feature, you can only use bFlash watermarked vread's.
Never try to program BOOT read or virtual read from other tools!

 

What control units (TCU's) are included in this bFlash update?
You can find the full list of control units below.

New OBD Protocols:

PORSCHE
SIEMENS SDI21 TC1791

More Info
Posted on by

bFlash Update V1911B – Magnetti Marelli BOOT!

Magnetti Marelli Protocols in BOOTMODE!

These new protocols allow read and write of the engines found below:

1.3 MJet EU5/6
2.3 MJet EU5/6
1.4 TJet EU5/6

Q&A

How fast is it ?
The write time is around 1 minute.
Reading is a Full Read and takes approximately 3-4 minutes.

 

Can I clone the ECU ?
Yes, full ECU cloning is possible.

 

How do I connect to the ECU ?
You can use the help function in bFlash and it will show you the pinout of the ECU.

 

What control units (TCU's) are included in this bFlash update?
You can find the full list of control units below.

New BOOT Protocols:

ABARTH
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640

ALFA ROMEO
Marelli 8F3 MPC5565
Marelli 9DF MPC5644
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640

FIAT
Marelli 8F3 MPC5565
Marelli 9DF MPC5644
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640

LANCIA
Marelli 8F3 MPC5565
Marelli 9DF MPC5644
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640

JEEP
Marelli 8F3 MPC5565
Marelli 9DF MPC5644
Marelli 8GMF MPC5565
Marelli 8GMK MPC5640

More Info
Posted on by

bFlash Update V1911A – FORD TCU OBD!

Ford 8 & 10 speed Gearbox Protocols by OBD!

These new protocols allow read and write of the Transmission Unit’s in the latest Ford F-150 & Ford Raptor 3.5 EcoBoost with 10 speed transmission or the new Focus 1.5 TDCi with 8 speed automatic.

Q&A

Do I need to buy an extra bFlash module ?
Of course not! This protocol is active now, for all our active users.

 

How fast is it ?
The write time is around 3 min 30 seconds.
Reading is a Virtual Read in a matter of seconds.

 

How do I connect to the TCU ?
You can just connect directly to the OBD socket of the car.

 

What control units (TCU's) are included in this bFlash update?
You can find the full list of control units below.

New OBD Protocols:

FORD
UTCU3 TC277 10R80
UTCU3 TC277 8F35

More Info