Tag: bitedit

Posted on by

BitBox 3.1.0 rev 5 – FCA Bosch EDC17 added!

New module:

FCA Bosch Diesel CAN released with following families:

  • FCA Bosch EDC17C49 with virtual reading/writing and checksum calculation. Writing of calibrations area only!
  • FCA Bosch EDC17C79 with virtual reading/writing and checksum calculation. Writing of calibrations area only!
  • Uploading virtual reading files now in progress!
  • MB Bosch EDC17 CAN now available for real tests and almost done.
Module Info

New Families:

  • Toyota Denso Gen1 HCM Virtual reader available for virtual reading Hybrid Control Module files from our server
  • Toyota Denso 76F00XX TCM CAN available for writing TCM files. Now in test state in module Toyota Denso Gen1 CAN

Fixes and improvements:

  • – All Toyota modules made more stable for using not OpenPort 2.0 J2534 devices.
  • Fixed write coding for BMW MD1 family

 

More Info

 

View Full Range of modules here.

bitbox_logo

Posted on by

BitSoftware Updates!

We can offer a 10% discount on BitBox and BitEdit software activations until 06-11-2018.

Use the coupon code BITX10 at checkout.

1. BitBox update ver3.0.9

New modules: 

BMW Motorrad module is now ready for tests with following families:

  • BMW BMSE (Marelli MBC1) with VR, writing, checksums calculations
  • BMW BMSK (ME9.2) with reading, writing and checksums
  • BMW BMSKP (ME9.2.0) with reading, writing and checksums

If you want to join the test – please contact us to sale@bitbox.ru

New families: 

  • China Bosch ME7.8.8 FAW now supported
  • Module Bosch MSE3.0 renamed to China Bosch Moto/Extreme, and Bosch US6.0 added with virtual reading, writing and checksums

Improvements and fixes:

  • Some fixes for Bosch MG1 BMW writing procedure
  • More variations of security added to China Bosch M7.8/ME7.8.8 BSL

 

2. BitEdit update 

We have an update for BitEdit with a lot of small interface and functional changes.

Also we have a new module: Kia/Hyundai Continental SIM2K-24x

bitbox_logo

 

BitBox – Software for reading and writing control unit memories.

 

 

BitEdit_logo

 

BitEdit – Software for editing calibrations within control unit maps.

 

 

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on by

BitEdit BMW Bosch MD1 Module Released!

New software module for editing calibrations of Bosch MD1 ECUs of diesel BMW vehicles. Supports all required maps for remapping, EGR, DPF removal, and also SCR (ADBlue) removal! DTC table also supported! 

Supported file size 7.5MB.

The following maps are available for editing:

Air control: desired airmass, airmass correction
Boost pressure: desired boost pressure, boost pressure limitation by atmospheric pressure, boost controller duty cycle with limitations
DPF: DPF regenerations masks, DPF switch, exhaust pressure sensor flags, scalings, error voltage thresholds
EGR Control: EGR position corrections, lower/upper thresholds for enable EGR for all modes, maximal EGR position request
EGT sensors: all EGT sensors scalings, flags and error voltage thresholds
Injection: injector opening time, injection quantity from torque, post injection quantities, start of main injection angle, start of injection limiters
Rail pressure: PID-controller components, target rail pressure, rail pressure limitation, minimal rail pressure for start, rail pressure regulator
SCR (ADBlue): Catalyst load/unload factors, switches for NOx, ADBlue injection, lambda regulation, NSC, LamCtl
Target lambda: Target lambda for smoke limitation
Torque limitation: main inner and outer torque limiters, torque limitation in system errors, torque limitation by EGT, exhaust pressure, fuel temperature
Requested torque: requested torque, accelerator pedal maps for ECO,Sport,Sport+ modes, requested torque reducing by ECT and atmospheric pressure
DTC mask

 

More Info

View Full Range of modules here.

 

Posted on by

BitBox v3.04 rev 1 – Toyota Denso Gen3 CAN added!

New module:

  • Toyota Denso Gen3 CAN added in final testing stage: supported new 2018+ vehicles with Renesas R7F701202 MCU.
Module Info

New Families:

  • Added Bosch ME(G)17.9.21 to Kia/Hyundai Petrol CAN module
  • Added BMW Exx Bosch EDC17C50 to BMW Exx Bosch CAN module

Fixes and improvements:

  • Improved checksums calculation on all Kia/Hyundai Petrol CAN Bosch ECUs
  • Some fixes for Volvo new families
  • Added support for all variations of MT05 CAN into Harley Delphi module. 3-plug also now supported!
  • Some fixes for slave system for virtual reading system

 

More Info

 

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox v3.0.3 rev13 – Volvo Denso SH72xxx CAN Module Released!

New module Volvo Denso SH72xxx CAN, supports 2 families in BENCH-CAN mode.

Direct connection to the ECU is required (recommended cable here), however there is no need to open the controller!

Supported:
– Denso SH72543 2.0 Mb BENCH-CAN
– Denso SH72546 3.75 Mb BENCH-CAN

Module Info

New families and improvements:
– Now supported BMW Fxx DOUBLE MEVD17.2.X ECU in test mode.v FID133 for writing 2nd ECU added, 1st ECU can be written with FID 132 as single MEVD17.2.X
– BMW Fxx Bosch ENET now fixed and not require to reswitch ignition, coding system also fixed!

Master/Slave system:
– Searching files implemented for slave files list in Master application. Filtering possible by text and by slave selection
– Filename generation when saving slave file also added
– Slave now can do request, even when file was not found on server during virtual read

Interface fixes:
– Interface fixes, progress bar bug fixed
– Error handling and internal logging improved
– Removed battery voltage control for ENET families

 

 

More Info

 

View Full Range of modules here.

bitbox_logo

 

Posted on by

BitBox BMW Fxx ENET Module Released!

The BitSoftware team have released this new module which allows complete OBD flashing of BMW EDC17 / MEVD17 ECUs fitted in Fxx vehicles over ENET. 

Module allows:

  • Identification
  • Virtual Reading
  • Writing program and maps
  • Checksum and CVN fix on writing
  • Recovery with original file (as official BMW diagnostic system)
  • Reading and writing coding data
  • DTC reading / clearing

No need to dismount, open or drill the ECU – FULL OBD2 solution.

 

Supported Bosch ECUs

Bosch EDC17C41 (DDE7.2.1)
Bosch EDC17C50 (DDE7.0.1)
Bosch EDC17C56 (DDE7.4.1)
Bosch EDC17CP45 (DDE7.3.1)
Bosch EDC17CP49 (DDE7.5.1)
Bosch EDC17CP09 (DDE7.3a)
Bosch MEVD17.2
Bosch MEVD17.2.4
Bosch MEVD17.2.5
Bosch MEVD17.2.6
Bosch MEVD17.2.9
Bosch MEVD17.2.G (incl. S55)
Bosch MEVD17.2.8
Bosch MEVD17.2.H
Bosch MEVD17.2.3

 

More Info

 

View Full Range of modules here.

bitbox_logo

 

Posted on by

BitBox BMW Bosch EDC17 FULL OBD Module!

The BitSoftware team have been hard at work developing a new module which allows complete OBD flashing of BMW EDC17 ECUs fitted in Exx vehicles. 

It allows identification, virtual reading and writing of the calibrations areas, also supports automatic correction of checksums while writing.

No need to dismount, open or drill an ECU – FULL OBD2 solution.

 

Supported Bosch EDC17 ECUs

Bosch EDC17CP45 (DDE7.3.1)

Bosch EDC17CP02 (DDE7.1)

Bosch EDC17C06 (DDE7.0)

Bosch EDC17CP09 (DDE7.3)

Pre order NOW

 

View Full Range of modules here.

bitbox_logo

 

Posted on by

BitEdit Honda Keihin Module Released

Module for editing and tuning of Honda Keihin ECUs with SH7058, SH72543, MPC5566 MCUs.

BitEdit Honda Keihin Screenshot 1

The following maps are available for editing:

  • Camshaft angle control (VTC)
  • Closed loop lambda
  • Injector opening time
  • WOT determining mode
  • Fuel compensations for temperature
  • Target lambda at High VTEC and Low VTEC
  • Idle speed control
  • Knock limits
  • Knock sensitivity
  • Knock retardation
  • Spark advance at High VTEC and Low VTEC
  • Throttle valve control
  • VTEC control
  • REV limiter

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Posted on by

New BitSoftware modules released!

The BitSoftware team have been hard at work developing some new modules!

A new module has been released for BitEdit:

Module for editing and tuning of Bosch ME17.8.5 ECUs.

BitEdit ME17.8.5 Screenshot 3

The following maps are available for editing:

  • Airmass flow calculation over throttle valve
  • Idle speed control
  • Enrichment and enleanment at acceleration and deacceleration
  • Injection timing control
  • Mixture control
  • Target lambda for knock protection
  • Spark advance optimal and base, advance correction
  • Ignition efficiency
  • Lambda efficiency
  • Optimal torque

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Also two new modules have been added to the BitBox flasher.

BitBox Rotax Extreme Flasher Module.

rotax

Siemens MSE 3.7x.

Allows identification, reading of full flash and writing of the calibrations areas by K-Line. It also supports automatic correction of checksums while writing.

Siemens MSE 3.7 with MCU ST10F269 and internal Flash memory 256Kb.

Siemens MSE 3.71 with MCU ST10F269 and internal Flash memory 256Kb.

Bosch ME17.8.5.

Allows identification, virtual reading of full flash (from internet server) and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

ECU is based on MCU Infineon Tricore TC1762 with internal Flash memory 1504Kb.

Click here for more info!

BitBox Chrysler / Dodge / Jeep Petrol Flasher Module.

ngc4-gpec2

Allows identification, reading of full flash and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

  • Motorola NGC3 MPC565 1Mb
  • Motorola NGC4 MPC5554 2Mb
  • Motorola NGC4A MPC5566 3Mb
  • Continental GPEC (SIM90) MPC561+EXT.FLASH 2Mb – beta version
  • Continental GPEC2 MPC5566 3Mb – beta version
  • Continental GPEC2A MPC5566 3Mb – in development, not yet released!

 
Click here for more info!

View Full Range of modules here.

bitbox_logo

 

Posted on by

New BitEdit modules released!

BitEdit Toyota Bosch Screenshot 2BitEdit have launched a new module for editing and tuning of Bosch EDC15, EDC16, EDC17 series for 1.4 and 1.6 D-4D Toyota engines.

The following maps are available for editing:

Airmass maps for EGR, thresholds for EGR, desired boost maps and boost limitation, boost pressure vnt control maps, injection time control, fuel quantity maps, conversion from torque to fuel, quantity limitation maps, target lambda for smoke limitations, rail pressure maps, rail pressure limitation, start of injection maps, and also torque limitation, requested torque, gearbox torque maps, and torque monitoring maps and values (for EDC17) etc… See screenshots for more info!

Click here for screenshots and more info!

 

 

BitEdit Arctic Cat Denso Screenshot 1Also another new module is available for editing files from normal aspirated and turbocharged Arctic Cat snowmobiles with Denso ECUs 32920-49Xxx based on MCU Renesas SH7052..

The following maps are available for editing:

Ignition angle, rpm limitation, injection time and enrichment calculation, boost pressure and limiters for boost, and also sensors calibration maps.

Click here for screenshots and more info!

 

View Full Range of modules here.

BitEdit_logo