-
Out of stock
Please note, we can only sell this product to customers who purchased WinOLS from Chiptuningshop. Unfortunately we can not handle licenses which were supplied by other resellers. Please enter your registered WinOLS email below and we will send you an upgrade offer: -
Please note, we can only sell this product to customers who purchased WinOLS from Chiptuningshop. Unfortunately we can not handle licenses which were supplied by other resellers.
WinOLS5 features and updates annual fee MUST be purchased for each machine license active on your account!
Adjust the product quantity to match the number of licenses.
-
Existing WinOLS4 users who wish to upgrade: CLICK HERE
This product uses an annual subscription model for updates. The first year is included, value 82.50 euros per machine license. A valid subscription is not mandatory for use, however software updates and technical support will not be available. -
Please note, we can only sell this product to customers who purchased WinOLS from Chiptuningshop. Unfortunately we can not handle licenses which were supplied by other resellers.
-
Sale!
Limited offer, while stocks last!
Suitable for VW Audi Seat Skoda Fiat Opel vehicles, a multifunction Tacho/Immobiliser/Key Coding tool.
- Support for VDO dashboards for Audi A1,Q3, VW, Skoda, Seat MY2009 - 2016 with NEC mcu and 24C32 or 24C64 eeprom.
- Mileage change for Magnetti Marelli dashboards with NEC and 95320 eeprom! ONLY via OBD! Without disassembly of instrument panel. Supports NEC MCU with 256 kB, 512 kB and 1MB flash memory.
- NEW Super Rapid key programming feature for VAG cars with VDO and Magnetti Marelli dashboards on CAN bus! ( TP2 and UDS protocols )
- Support for older VDO dashboards for VW Polo, Skoda Fabia,Roomster MY2006-2009 K-Line via BCM - KW1281 protocol.
- Support for Magnetti Marelli MM5/7/9 dashboards for VW from years 2009-2013 with NEC + 95320 eeprom, or 9S12 MCU .CAN bus - UDS protocol. Full support for VW Up, Skoda Citigo, Seat Mii with Marelli 9S12 dash MY2010+.
- Full Support for brasillian VDO dashboards of VW Fox, SAVEIRO, POINTER, ect . from year 2011 + with NEC D70F3422 mcu and 24C32 eeprom. Communication via K-Line - KWP2000 protocol.
- PIN code and CS data reading, Key programming via OBD for VW cars: GOL, FOX, SAVEIRO G5 from years 2009 - 2013 . 9S12 MCU with , or without external eeprom . Pre-programming with CS data of the new transponder keys for these cars when there is no valid key of the car! Communication via K-Line - KWP2000 protocol.
- PIN code and key data reading, key programming for Fiat cars with Delphi BCM MY2007-2017
- Supported Delphi BCM: NEC3237,3379,3556,3557,3633 with dataflash or external eeprom!
- Supported FIAT cars: Grande Punto, Doblo, 500, Panda, Qubo, Fiorino with Hitag2 transponder keys
- 500X, Tipo (Egea) with Megamos ID88 remotes MY2015-2017
- Key programming for Opel cars with Immo1,2 and Immo3 (CAN bus) up to year 2009
- Pin code reading from engine ecu of some Opel cars with Immo2. Program/erase keys of immo1,2 and 3. Pin code is required! Clear engine ecu, adaptation of virgin ecu to Immo2. Clear immo2, immo3, adaptation of virgin Immo2 to engine ecu.
- Built-In programmer for Megamos ID48, ID88, and Hitag2 transponder chips or remotes
-
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 800 euros. A valid subscription is mandatory for use. -
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 800 euros. A valid subscription is mandatory for use.
Please note: We are not permitted to sell this product to customers in South Korea. -
Includes hard plastic carry case.This tool has no annual fees. Software updates are free! -
Includes hard plastic carry case. This tool has no annual fees. Software updates are free! -
Used MPPS Package, consists of:
-
True Master OBD + Tricore Boot protocols.
-
Slave OBD + Tricore Boot protocols.
-
Virtual Master software (allows file decoding without the physical tool present).
Both tools are complete with boot interface, cables, probes, power supply, carry case and in great condition!
A great saving compared to the new cost of this package at £6000!
This tool has no annual fees. Updates and technical support are free! -
-
Out of stock
Used tool in good condition, only 1 unit available! -
Out of stock
Sorry, this tool has now been sold!
- Used FLEX Master with FLS0.1M ECU OBD + Bench software activation.
- Includes active subscription until August 2023 and transfer of account!
-
Sale!Out of stock
Sorry, this tool is now sold!
- Supports engine & gearbox controllers
- Lifetime activation included
-
Out of stock
Sorry, this tool is now sold!
- Supports engine & gearbox controllers
- Lifetime activation included
-
Sale!Out of stock
Sorry, this tool is now sold!
>> Similar tool available here <<
- OBD + BOOT + ENET
- BOSCH UNLOCK plugin MAGP1.18
- Supports engine & gearbox controllers
- Lifetime activation included
-
Out of stock
Sorry, this tool is now sold!
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. A valid subscription is not mandatory for use, however services which require subscription will not be available.
Used KESS3 MASTER in good condition with expired subscription since 01 October 2023. Includes the following packages:
-
KESS3MA001 Car – LCV OBD Protocols activation
-
-
Sale!Out of stock
This tool has been used for demonstration, condition is as NEW and complete with a full year of subscription.
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available.
Master version with FULL TCU / GEARBOX protocols -
Out of stock
Sorry, this tool is now sold!
Used OLS300 - 8 / 16 Bit simulator / monitor module in very good condition, includes:
- OLS344 - Adapter for PSOP44
- OLS332 - Adapter for OLS300 to 2x PLCC32. Can also be used for 1x PLCC32
- EAD610 - Universal PSOP44 Socket
-
Out of stock
Sorry, this product is now sold!
Used ECM Titanium Full version (does not need to be linked to KESS/K-TAG account) Subscription included until 09/12/2021. -
Out of stock
Sorry, this product has now been sold!
Used DFOX Master with valid subscription until 31/08/2024.
We supplied this tool new a few months ago, it has had very minimal use and is very good condition. Includes the following protocols:
OBD PACKAGE:- DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
-
Sale!Out of stock
Sorry, this tool has now been sold!
Ex Demo DFOX Master FULL (ALL protocols active).
This tool has been used in our own offices for demonstration purposes only and is in very good condition. Activations include:
DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS + INCLUDED PACKAGES: PRO:- BENCH MODE (SERVICE MODE) MICRO/FLASH + EEPROM TRICORE/ MD1-MG1 AURIX/FREESCALE/RENESAS (ALL VEHICLES)
- FULL SYSTEM (MICRO/FLASH + EEPROM) BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS (ALL VEHICLES)
- BENCH MODE / SERVICE MODE (ALL VEHICLES) MICRO/FLASH + EEPROM TRICORE/ MD1-MG1 AURIX/FREESCALE/RENESAS
- FULL SYSTEM (MICRO/FLASH + EEPROM) (ALL VEHICLES) BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- BOOT MODE (ALL VEHICLES) ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI (ALL VEHICLES)
- BDM/JTAG (ALL VEHICLES) MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, TOYOTA NEC76Fxxx
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
MASTER tool, reads/writes open BIN files. This tool uses a subscription model for updates, support and online services. The first year is included, value 1200 euros. A valid subscription is mandatory for use. -
Out of stock
Sorry, this tool is now sold!
- OBD K-Line, CANBUS, DoIP ENET
- VAG FRF/ODX/SGO flasher
- BOOT/BENCH Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
- Motorola BDM - MPC5xx
- Read and write encrypted SLAVE files
- Active subscription included
- NEW! Unrestricted slave option allows user to work any master
-
Out of stock
Sorry, this tool is now sold!
CMDFlash OBD/TCU/FRF/ENET/TRICORE BOOT/BENCH slave includes 1 year subscription and can be linked to ANY master (transfer fee included) -
Out of stock
Sorry, this tool is now sold!
CMDFlash OBD slave includes 1 year subscription. This tool is released and ready to be linked to a new master (transfer fee included)- OBD K-Line, CANBUS
- Read and write encrypted SLAVE files
- One year free subscription ( value 1100CHF)
-
Out of stock
Sorry, this tool is now sold!
CMDFlash FULL slave includes 1 year subscription. This tool is released and ready to be linked to a new master (transfer fee included)- OBD K-Line, CANBUS, DoIP ENET
- VAG FRF/ODX/SGO flasher
- BOOT/BENCH Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
- Motorola BDM - MPC5xx
- Read and write encrypted SLAVE files
- One year free subscription ( value 1100CHF)
-
Out of stock
Sorry, this tool is now sold!
OBD / ENET / BOOT / TCU / MEDC17 + MDG1 BENCH / FRF / VBF Master
-
Out of stock
Sorry, this tool is now sold!
MASTER tool, reads/writes open BIN files and supports slave management. -
Out of stock
We are selling this tool on behalf of a client, please contact us if you wish to purchase.
-
Out of stock
Sorry this tool is now sold!
Used bFlash master tool, includes active subscription until August 2022 and transfer of ownership! This tool is in great condition, as new and complete.
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is mandatory for use.
Overview:MASTER bFlash, bDiag, bLog, bSpy software plugins
** NOW with bTrace LIVE tuning included! **
- Read/write master open binary files
- OBD, BENCH, BOOT, BDM, JTAG protocols
- Hardware interface and USB cable
- OBD cable + OBD Y-cable
- Direct ECU + TCU cables, tripod + boot pin
- 12V Power supply (Multi plug UK/EU/AU/US)
- Heavy duty carry case
- Supported ECU list here
-
Out of stock
MASTER tool, reads/writes open BIN files. This tool has no annual fees. Updates and technical support are free.
Used Autotuner Master tool in perfect condition, includes:
- Autotuner Master Flasher + Datalogging function
- Standard OBD + USB cables
- Universal cable + Universal box
- Probe with positioner and cable
- MEDC17 boot probe
- Carrying case
- Power adapter
