This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the MPPS OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a cable to connect the ecu directly to the MPPS OBD port. An external power source is required to power the ECU.
This kit includes the Simos 8x probe and ECU cable.
This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a cable to connect the ECU directly to the MPPS OBD port.
This cable can also be used for most VAG MEDC17 ECU’s and is complete with 1K ohm boot wire!
This kit includes the Simos PCR probe and ECU cable. An external power source is required to power the ECU.
This adapter cable allows you to flash Porsche M5.2.2 over OBD.
The adapter has high quality OBD2 moulded connectors, it will supply the ECU the necessary voltage at the VPP pin required for reflashing.
This adapter cable allows you to flash Porsche M5.2.2 over OBD with MPPS by AMT-Cartech.
The adapter has high quality OBD2 moulded connectors, it will supply the ECU the necessary voltage at the VPP pin required for reflashing.
This BDM Style probe allows reading/writing of the VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the MPPS OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This kit allows you to connect your MPPS easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your MPPS to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to MPPS, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
