Posted on

MPPS VAG EDC17/MED17 Boot Kit – No Soldering!

This kit allows you to connect your MPPS easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.

The kit includes:

  • VAG EDC17/MED17 cable with boot pin (integrated 1kΩ resistor)
  • Universal MEDC17 tricore boot pin kit consisting of an ECU mounting plate and 2 x arms equipped with spring loaded boot pins. The arms are secured with high performance magnets ensuring no movement once aligned.

This kit provides a clean connection to ECU boot pads without soldering!

Simply connect your MPPS to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!

 It is designed to work with controllers using TC1766 and TC1796 processor, this includes:

  • EDC17CP04
  • EDC17CP14
  • EDC17CP20
  • EDC17CP24
  • EDC17U01
  • EDC17U05
  • MED17.1
  • MED17.1.1
  • MED17.5
  • MED17.5.1
  • MED17.5.5
  • MED17.5.20

This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)

* Please note: This cable has a special pinout which is unique to MPPS, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *

Posted on

ByteShooter VAG EDC17/MED17 Boot Kit – No Soldering!

This kit allows you to connect your ByteShooter easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.

The kit includes:

  • VAG EDC17/MED17 cable with boot pin (integrated 1kΩ resistor)
  • Universal MEDC17 tricore boot pin kit consisting of an ECU mounting plate and 2 x arms equipped with spring loaded boot pins. The arms are secured with high performance magnets ensuring no movement once aligned.

This kit provides a clean connection to ECU boot pads without soldering!

Simply connect your ByteShooter to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!

 It is designed to work with controllers using TC1766 and TC1796 processor, this includes:

  • EDC17CP04
  • EDC17CP14
  • EDC17CP20
  • EDC17CP24
  • EDC17U01
  • EDC17U05
  • MED17.1
  • MED17.1.1
  • MED17.5
  • MED17.5.1
  • MED17.5.5
  • MED17.5.20

This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)

* Please note: This cable has a special pinout which is unique to ByteShooter, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *

 

Posted on

AMT Cartech Official Distributor!

AMT Cartech have been developing flash tools since OBD tuning began, in fact they were responsible for developing the very first known OBD flasher “KWP2000”. The KWP2000 supported ecu’s using the Key Word Protocol 2000 as the name suggests!

Since then many new communication protocols arrived, so a new tool was needed and hence the Multi Protocol Programming System was born (MPPS).

The following modules are available to expand the functions of MPPS:

[tabs position=”top-left” style=”simple” type=”hover”]

[tab_title]

Tricore Boot

[/tab_title]

[tab_content]

This module adds boot mode support for controllers with the tricore processor.

Features:

  • Auto detects ECU and processor type. No need to select from list, everything is automatic!
  • Read/Write of all memories Eeprom, Irom, Xrom (where possible)
  • Patch function for OBD Flashing of TPROT ECU’s (supports only VAG at the moment)
  • TPROT / DS check feature, for testing if TPROT is active without opening ECU.
  • Supports Bosch upto TP12
  • Supports Siemens (current only for ECU’s without password protection),
  • Support for unlocking of VAG Simos PCR and Simos 8.
  • Checksum Correction supported for Bosch MEDC17.

MPPS_Boot_SW

[/tab_content]

[tab_title]

MultiBoot

[/tab_title]

[tab_content]

This module adds support for advanced functions on Marelli ECU’s.

Features:

  • Read / Write of Micro, Flash and EEprom without using a BDM programmer!
  • Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
  • Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
  • Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
  • Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
  • Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
  • Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
  • Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
  • Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
  • Fiat 5SF3 – Full Read / Write EEprom over K-Line.
  • Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
  • Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
  • Fiat ME7.9.10 – Full Read / Write Micro over CAN.
  • Fiat ME7.6.3 – Full Read / Write Micro over CAN.
  • Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
  • Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
  • Opel 6JO – Full Read / Write Micro and EEprom over K-line.

MultiBoot_SW

[/tab_content]

[/tabs]

View MPPS tools and accessories in our shop.

Posted on

Abritus AVDI VAG EDC17/MED17 Boot Kit – No Soldering!

This kit allows you to connect your AVDI easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.

The kit includes:

  • VAG EDC17/MED17 cable with boot pin (integrated 1kΩ resistor)
  • Universal MEDC17 tricore boot pin kit consisting of an ECU mounting plate and 2 x arms equipped with spring loaded boot pins. The arms are secured with high performance magnets ensuring no movement once aligned.

This kit provides a clean connection to ECU boot pads without soldering!

Simply connect your AVDI to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!

 It is designed to work with controllers using TC1766 and TC1796 processor, this includes:

  • EDC17CP04
  • EDC17CP14
  • EDC17CP20
  • EDC17CP24
  • EDC17U01
  • EDC17U05
  • MED17.1
  • MED17.1.1
  • MED17.5
  • MED17.5.1
  • MED17.5.5
  • MED17.5.20

This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)

* Please note: This cable has a special pinout which is unique to the AVDI interface, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *

 

Posted on

MEDC17 Tricore Boot Pin Kit – No More Soldering!

This kit provides a clean connection to ecu boot pads without soldering!

Simply screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. The arms are secured with high performance magnets ensuring no movement once aligned.

Each kit includes an ECU mounting plate and 2 x arms equipped with spring loaded boot pins. It is suitable for ecu’s with up to 2 connections.

* The cable pictured above is not included in the kit. Specific ecu cables can be supplied upon request. *

Posted on

ByteShooter Module 30 – Bosch MEDC17 Tricore Bootmode inc TP8/10

Module 30 is used for Bosch MEDC17 controllers using password protected TriCore TC17xx processor.

This module allows the reading and writing of flash and eeprom of “almost” all BOSCH EDC17 and MED17 by toolbox. With it is also possible to tune ECU’s which have a so-called Tuning-Protection 8/10. To compute to the checksum module 7 is required.

The module 30 is a pure software module. No additional hardware is included

** To open a slave “.pak” file of module 8, the matching master this module have unlocked also.

Posted on

ByteShooter Module 7 – MEDC17 OBD + Checksum

BS_modul7

Module 7 is used to read/write MEDC17 controllers without tuning protection over the OBD port.

It can also compute the checksum for all EDC17 / MED17 files read over OBD or bootmode (using seperate  Module 30). 

** Checksum function available in Master tools only!

This Module is now available free of charge in all ByteShooter tools!

Posted on

ByteShooter Module 5 – Trucks / Tractors

BS-truck_modModule 5 is for older truck and utility vehicles over the diagnostic port or on the table.

This supports the following vehicles:

  • EDC16C39 Iveco Truck
  • EDC16C8 Iveco Truck
  • EDC7C1 Iveco Truck
  • EDC7C1 New Holland Tractor
  • EDC7C3 DAF Truck
  • EDC7C3 MAN Truck
  • EDC7C32 DAF Truck
  • EDC7C32 MAN Truck
  • EDC7UC31 Doosan Machine
  • EDC7U31 Fendt Tractor
  • EDC7UC31 Iveco Truck
  • EDC7UC31 New Holland Truck
  • EDC7UC31 Valtra Tractor
  • MS6.1 MAN Truck
  • MS6.2 DAF Truck, Iveco Truck, Scania Truck
  • MS6.4 Fendt Truck), Iveco Truck, MAN Truck, New Holland Tractor, Nissan Truck

This Module is now available free of charge in all ByteShooter tools!