BMW DKG Bench solution (second phase)
Q&A
How fast is it?
The write time is around 30 seconds.
Reading takes around 4 minutes.
How do I connect to the TCU?
You can use the help function in bFlash and it will show you the pinout of the ECU.
What control units are included in this bFlash update?
You can find the full list of control units below.
New BENCH Protocols:
BMW
Temic DK436.g1 TC1766 – M5/M6 F10
Temic DKG436.g2 TC1784 – 2/3/4 Series Fxx (released in phase 1)
Flashing, datalogging & diagnostics.
All in one tool!
BENCH solution for the Indian Challenger!
Q&A
How fast is it?
The write time is around 30 seconds.
Reading takes around 45 seconds
How do I connect to the ECU?
You can use the help function in bFlash and it will show you the pinout of the ECU.
What control units are included in this bFlash update?
You can find the full list of control units below.
New BENCH Protocols:
INDIAN
MG1CA007 MPC5898N
Flashing, datalogging & diagnostics.
All in one tool!
VAG MD1/MG1 solution by OBD!
Q&A
How fast is it?
The calibration write time is around 45 seconds.
The first flash takes between 5 min to 7 min depending on the platform.
Reading is virtual read
Can I flash back to original?
Yes, back to stock feature is available!
What about the flash counters?
Flash counters are reset and fixed to 0 after first flash.
Do I need to buy an extra bFlash module?
Of course not! This protocol is active now, for all users.
What control units are included in this bFlash update?
You can find the full list of control units below.
New OBD Protocols:
VAG
MG1CS001 MPC5777
MG1CS002 MPC5777
MG1CS011 MPC5777
MG1CS011 MPC5777
Flashing, datalogging & diagnostics.
All in one tool!
BMW Siemens BENCH solution released!
Q&A
How fast is it?
The write time is around 20 seconds.
Reading takes around 1 minute
Can I clone the ECU?
Yes, full ECU cloning is possible.
How do I connect to the ECU?
You can use the help function in bFlash and it will show you the pinout of the ECU..
What control units are included in this bFlash update?
You can find the full list of control units below.
New BENCH Protocols:
BMW
MSD80 TC1796
MSD81 TC1796
MSD85 TC1796
MSD87 TC1796
Flashing, datalogging & diagnostics.
All in one tool!
Porsche PDK7 Gearbox solution by OBD!
Q&A
How fast is it?
The calibration write time is around 1 minute.
A full software flash takes around 6 min 30 seconds.
Reading is a virtual read.
Do I need to buy an extra bFlash module?
Of course not! This protocol is active now, for all users.
How do I connect to the ECU?
You can connect the car through the OBD socket located in the car.
What control units are included in this bFlash update?
You can find the full list of control units below.
New TCU OBD Protocols:
PORSCHE
PDK-TC210.g1 – TC1766
PDK-TC210.g2 – TC1766
PDK-TC240 – TC1767
Flashing, datalogging & diagnostics.
All in one tool!
New AC DELCO for GM vehicles by BENCH/OBD!
Q&A
How fast is it?
The calibration write time is around 45 seconds.
Real reading takes around:
E39A : 4 minutes
E78 : 4 minutes
E80 : 5 minutes 30 seconds
E83 : 2 minutes 45 seconds
E92 : 5 minutes 30 seconds
E98 : 5 minutes 30 seconds
Can I program EEPROM?
Yes, memory can be programmed in Bench mode.
Do I need to buy an extra bFlash module?
Of course not! This protocol is active now, for all users.
How do I connect to the ECU?
You can connect the car through the OBD socket located in the car.
What control units are included in this bFlash update?
You can find the full list of control units below. 2018 to 2020 with 5 byte seed-key are also covered.
New OBD/BENCH Protocols:
BUICK
AC Delco E39A MPC5566
AC Delco E78 MPC5566
AC Delco E80 MPC5676
CADILLAC
AC Delco E39A MPC5566
AC Delco E80 MPC5676
AC Delco E92 MPC5674
CHEVROLET
AC Delco E39A MPC5566
AC Delco E78 MPC5566
AC Delco E80 MPC5676
AC Delco E92 MPC5674
AC Delco E98 MPC5674
GMC
AC Delco E39A MPC5566
AC Delco E78 MPC5566
AC Delco E80 MPC5676
AC Delco E83 MPC5565
AC Delco E92 MPC5674
AC Delco E98 MPC5674
HOLDEN
AC Delco E39A MPC5566
AC Delco E78 MPC5566
AC Delco E80 MPC5676
AC Delco E83 MPC5565
AC Delco E98 MPC5674
OPEL
AC Delco E39A MPC5566
AC Delco E78 MPC5566
AC Delco E80 MPC5676
AC Delco E83 MPC5565
AC Delco E98 MPC5674
Flashing, datalogging & diagnostics.
All in one tool!
New BENCH protocols released for VAG Simos protocol + BMW DKG7!
Q&A
How fast is it?
VAG Simos: The write time is around 30 seconds
Reading takes around 1 minutes
BMW DKG7: The write time is around 20 seconds
Reading takes around 1 minutes
Can I clone the ECU?
VAG Simos: No, ECU cloning is not possible
BMW DKG7: Yes, full TCU cloning is possible.
How do I connect to the ECU?
You can use the help function in bFlash and it will show you the pinout of the ECU.
What control units are included in this bFlash update?
You can find the full list of control units below.
New BENCH Protocols:
BMW
Temic DK436.g2 TC1784 (2/3/4 Series Fxx)
VAG GROUP
SIMOS 8.3 TC1796
SIMOS 8.4 TC1796
SIMOS 8.5 TC1796
SIMOS 12.1 TC1797
SIMOS 12.2 TC1797
PCR 2.1 TC1796
Flashing, datalogging & diagnostics.
All in one tool!
New FORD BENCH PROTOCOLS:
6.7L PowerStroke 2020 engine – MD1CP006
2.7 EcoBoost (Nano) engine – BONUS – MG1CS018
5.0L v8 engine (Coyote) – BONUS – MG1CS019
Q&A
How fast is it?
The write time is around 20 seconds
Reading takes around 50 seconds
Can I clone the ECU?
No, ECU cloning is not possible
How do I connect to the ECU?
You can use the help function in bFlash and it will show you the pinout of the ECU.
What control units are included in this bFlash update?
You can find the full list of control units below.
New BENCH Protocols:
FORD
MD1CP006 TC298
MG1CS018 TC298
MG1CS019 TC298
Flashing, datalogging & diagnostics.
All in one tool!
All McLarens with 4.0TT & 3.8TT are now supported by OBD!
Includes every model starting with the McLaren MP4-12C up to the McLaren 720S & Senna. Public beta is now online.
Q&A
How fast is it?
The write time varies between 2 minutes (Calibration Flash) & 10 minutes (Full Flash + Patch)
Reading is a Virtual read in a matter of seconds.
Do I need to make post flash adaptations?
Yes, Post flash adaptations are required.
Adaptations routines are integrated in bFlash.
How do I connect to the ECU?
You can connect the car through the OBD socket located in the car.
What control units are included in this bFlash update?
You can find the full list of control units below.
New OBD Protocols:
McLaren
Bosch ME17.8.32 TC1797
Bosch ME17.8.33 TC1793
Flashing, datalogging & diagnostics.
All in one tool!
Support for MG1/MD1 with tuning protection level 7 & 8!
From now MG1CS011 with TC298 is supported!
Also some additional types of MEDC17 have been added.
Q&A
How fast is it?
The write time is around 20 seconds.
Reading takes around 1 minute.
How do I connect to the ECU?
You can use the help function in bFlash and it will show you the pinout of the ECU.
Can I clone the ECU?
No, full ECU cloning is not possible but you have full flash & Internal EEPROM access.
What control units are included in this bFlash update?
You can find the full list of control units below.
New BENCH Protocols:
ASTON MARTIN
Bosch ME17.8.31 TC1797
DEUTZ
Bosch EDC17CV56 TC1767
FENDT
Bosch EDC17CV56 TC1767
MERCEDES BENZ
Bosch MED17.7.3.1 TC1793
POLARIS
ME17.9.74 TC1762
PORSCHE
Bosch EDC17CP54 TC1793
SEAT
Bosch MG1CS011 TC298
SKODA
Bosch MG1CS011 TC298
VW
Bosch MG1CS011 TC298
Bosch EDC17CP54 TC1793
