-
PROFESSIONAL/TRADE BUYERS ONLY, WE DO NOT PROVIDE FILES OR SUPPORT TO END USERS!
This tool can only read/write encrypted slave files to be managed by the linked master. This device will be VIN LOCKED to a single vehicle on first use. Included with the Powergate 4 is a standard 16 pin OBD2 cable and protocols for CARS only. -
J2534 Tactrix Openport 2.0 interface and a BitSoftware Senselock USB dongle are required in order to use this software. For full info about BitSoftware products click here.
-
Out of stock
Sorry, this product has now been sold!
Used DFOX Master with valid subscription until 31/08/2024.
We supplied this tool new a few months ago, it has had very minimal use and is very good condition. Includes the following protocols:
OBD PACKAGE:- DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
-
Out of stockThe FLK06B kit contains the: FLX2.21, FLX2.22, FLX2.23, FLX2.29, FLX2.30 & FLX2.53 cables.
-
Out of stock
Sorry, this tool is now sold!
This is brand new, never used or activated CMDFlash Master.
One tool only, available with a massive saving on the list price!
-
MASTER tool, reads/writes open BIN files. This tool uses a subscription model for updates, support and online services. The first year is included, value 600-1000 euros, depending on tool configuration. A valid subscription is mandatory for use.
Available in the following configurations:- DFOX START: OBD CARS/MOTO
- DFOX HEAVY: OBD TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
SLAVE tool, works in conjunction with a linked Master. This tool uses a subscription model for updates, support and online services. The first year is included, value 500-800 euros, depending on tool configuration. A valid subscription is mandatory for use.
Available in the following configurations:- DFOX START: OBD CARS/MOTO
- DFOX HEAVY: OBD TRUCKS/BOATS/TRACTORS
- BENCH MODE Driver: EDC16/EDC7/ME9/EDC17/MED17/ MD1-MG1 AURIX / FREESCALE / RENESAS
- FULL SYSTEM Driver: BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Works without having to open the ECU.
- BOOT MODE Driver: ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI
- BDM/JTAG Driver: MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, NEC76Fxxx
- Full micro + flash + EEprom management, useful for cloning (where supported).
- Requires opening of open ECU.
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
-
Out of stock
Sorry, this tool has now been sold!
Ex Demo DFOX Master FULL (ALL protocols active).
This tool has been used in our own offices for demonstration purposes only and is in very good condition. Activations include:
DFOX FULL OBD START + HEAVY: OBD CARS/MOTO/TRUCKS/BOATS/TRACTORS + INCLUDED PACKAGES: PRO:- BENCH MODE (SERVICE MODE) MICRO/FLASH + EEPROM TRICORE/ MD1-MG1 AURIX/FREESCALE/RENESAS (ALL VEHICLES)
- FULL SYSTEM (MICRO/FLASH + EEPROM) BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS (ALL VEHICLES)
- BENCH MODE / SERVICE MODE (ALL VEHICLES) MICRO/FLASH + EEPROM TRICORE/ MD1-MG1 AURIX/FREESCALE/RENESAS
- FULL SYSTEM (MICRO/FLASH + EEPROM) (ALL VEHICLES) BOSCH, CONTINENTAL, DELCO, DELPHI, DENSO, MARELLI, SIEMENS
- BOOT MODE (ALL VEHICLES) ST10, C167, TRICORE RENESAS, FUJITSU, HITACHI, MITSUBISHI (ALL VEHICLES)
- BDM/JTAG (ALL VEHICLES) MC32/ZC32, NEXUS MPC55xx, NEXUS MPC/SPC56XX, TOYOTA NEC76Fxxx
- PROTOCOLS FOR TRANSMISSION CONTROLLERS (TCU) / GEARBOX
MASTER tool, reads/writes open BIN files. This tool uses a subscription model for updates, support and online services. The first year is included, value 1200 euros. A valid subscription is mandatory for use. -
Sale!
Limited offer, while stocks last!
Suitable for VW Audi Seat Skoda Fiat Opel vehicles, a multifunction Tacho/Immobiliser/Key Coding tool.
- Support for VDO dashboards for Audi A1,Q3, VW, Skoda, Seat MY2009 - 2016 with NEC mcu and 24C32 or 24C64 eeprom.
- Mileage change for Magnetti Marelli dashboards with NEC and 95320 eeprom! ONLY via OBD! Without disassembly of instrument panel. Supports NEC MCU with 256 kB, 512 kB and 1MB flash memory.
- NEW Super Rapid key programming feature for VAG cars with VDO and Magnetti Marelli dashboards on CAN bus! ( TP2 and UDS protocols )
- Support for older VDO dashboards for VW Polo, Skoda Fabia,Roomster MY2006-2009 K-Line via BCM - KW1281 protocol.
- Support for Magnetti Marelli MM5/7/9 dashboards for VW from years 2009-2013 with NEC + 95320 eeprom, or 9S12 MCU .CAN bus - UDS protocol. Full support for VW Up, Skoda Citigo, Seat Mii with Marelli 9S12 dash MY2010+.
- Full Support for brasillian VDO dashboards of VW Fox, SAVEIRO, POINTER, ect . from year 2011 + with NEC D70F3422 mcu and 24C32 eeprom. Communication via K-Line - KWP2000 protocol.
- PIN code and CS data reading, Key programming via OBD for VW cars: GOL, FOX, SAVEIRO G5 from years 2009 - 2013 . 9S12 MCU with , or without external eeprom . Pre-programming with CS data of the new transponder keys for these cars when there is no valid key of the car! Communication via K-Line - KWP2000 protocol.
- PIN code and key data reading, key programming for Fiat cars with Delphi BCM MY2007-2017
- Supported Delphi BCM: NEC3237,3379,3556,3557,3633 with dataflash or external eeprom!
- Supported FIAT cars: Grande Punto, Doblo, 500, Panda, Qubo, Fiorino with Hitag2 transponder keys
- 500X, Tipo (Egea) with Megamos ID88 remotes MY2015-2017
- Key programming for Opel cars with Immo1,2 and Immo3 (CAN bus) up to year 2009
- Pin code reading from engine ecu of some Opel cars with Immo2. Program/erase keys of immo1,2 and 3. Pin code is required! Clear engine ecu, adaptation of virgin ecu to Immo2. Clear immo2, immo3, adaptation of virgin Immo2 to engine ecu.
- Built-In programmer for Megamos ID48, ID88, and Hitag2 transponder chips or remotes
-
J2534 Tactrix Openport 2.0 interface and a BitSoftware Senselock USB dongle are required in order to use this software. For full info about BitSoftware products click here.
-
The following promotions are available from Dimsport this week only:
New Trasdata, available with the following activations
ALL THE CATEGORIES: NG protocols + 12 month subscription £2625
New Genius + Race EVO PLUS FULL with 1000 credits, available with the following activations:
BIKE: NG protocols + 12 month subscription £2175
CAR/LCV: NG protocols + 12 month subscription £3050
TRUCK/LCV: NG protocols + 12 month subscription £3900
TRACTOR: NG protocols + 12 month subscription £3900
ALL THE CATEGORIES: NG protocols + 12 month subscription £5750
New Genius + Trasdata + Race EVO PLUS FULL with 1000 credits, available with the following activations:
BIKE: NG protocols + NT applications + 12 month subscription £3400
CAR/LCV: NG protocols + NT applications + 12 month subscription £5150
TRUCK/LCV: NG protocols + NT applications + 12 month subscription £6450
TRACTOR: NG protocols + NT applications + 12 month subscription £6450
ALL THE CATEGORIES: NG protocols + NT applications + 12 month subscription £8400
Please complete the details below if you wish to purchase and we will contact you! -
Out of stock
Sorry, this tool is now sold!
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. A valid subscription is not mandatory for use, however services which require subscription will not be available.
Used KESS3 MASTER in good condition with expired subscription since 01 October 2023. Includes the following packages:
-
KESS3MA001 Car – LCV OBD Protocols activation
-
-
Out of stockUsed tool in good condition, only 1 unit available!
-
Out of stock
Sorry, this tool is now sold!
- Supports engine & gearbox controllers
- Lifetime activation included
-
Please note, we can only sell this product to customers who purchased WinOLS from Chiptuningshop. Unfortunately we can not handle licenses which were supplied by other resellers.
WinOLS5 features and updates annual fee MUST be purchased for each machine license active on your account!
Adjust the product quantity to match the number of licenses.
-
Out of stock
Sorry, this tool is now sold!
- Supports engine & gearbox controllers
- Lifetime activation included
-
Out of stock
33% OFF. End of line product available while stocks last!