Tag: read

Posted on by

BitBox 3.3.6 rev 1

New module:

  • BOSCH MG1/MD1 BENCH is now ready for sales and has been already tested. We remind that module works only with Scanmatik2/Scanmatik2 Pro devices and requires the latest driver version 2.21.11. List of tested ECU types you can check on our website! All other ECUs were not tested and will be supported ASAP. FID 282: Bosch MG1/MD1 SPC/AURIX BENCH with reading/writing and checksums calculation.
  • VAG Continental Simos12.1 now ready for tests, please contact BitBox support if you would like to beta test

Fixes and improvements:

  • Bosch INVCON3.3 support added to Bosch MG1/MD1 Bench
  • Delphi MT05 read/clear DTC has been returned
  • Kia/Hyundai SIM2K-25X/26X now works with Scanmatik2/Scanmatik2Pro. We recommend to use them.
  • PSA Continental SID208 now works with Scanmatik2/Scanmatik2Pro, other devices are also supported but not properly tested.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.3.4 rev 1

New module:

Ford Continental Diesel CAN introduced with following families:

  • FID255: Ford Continental SID208 TC1797 CAN (FULL OBD) – RD/WR/CS
  • FID256: Ford Continental SID211 TC1791S CAN (FULL OBD) – RD/WR/CS
  • FID259: Ford Continental SID206 MPC563+Ext.Flash – RD/WR/CS
  • FID261: Ford Continental SID803A MPC561+Ext.Flash – RD/WR/CS
Order Module

Fixes and improvements:

  • Fixed some errors for Kia/Hyundai SIM2K-260 for reading/writing when password is already known
  • Fixed timeout error with erasing memory on MB Delphi CRD2.XX
  • Fixes for some ECU types for China Delphi DCM3.7AP during writing on vehicle

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.3.3 rev 1

New families:

  • Added to module MB Delphi Diesel CAN Delphi CRD3.XX TC1793 BENCH mode working on other baudrate for new type of ECUs MY2020. Required DrewTech CarDAQ+ device or other J2534 device supported 800 kbit/s CAN
  • PSA Continental SID208 TC1797 added to module PSA Diesel CAN with reading/writing and checksums calculation, now ready for tests
  • China Bosch M(E)7.9.71 added to module China Bosch Petrol with virtual reading/writing and checksums calculation
  • China Bosch MED17.8.10 Geely added to module China Bosch Petrol in test mode with bench reading/writing on the car and checksums calculation

Family fixes and improvements:

  • China Delphi MT92 now supports MT92.1 with 2.5Mb flash size
  • Renault Continental EMS3125 fixed some ECU types reading and writing
  • SsangYong Delphi DCM3.2, DCM3.1 fixed entering programming mode
  • China Delphi MT80 fixed changing speed bug
  • Fixed writing on some ECUs for Renault EMS3155 and Renault SID310
  • Fixed password reading on some Continental SIM2K-250 ECU types. Now family works with Bosch VCM2, but doesn’t work with CarDAQ+
  • Added some ECU types for detection Continental SIM2K-141/341 or Continental SIM2K-240

General Fixes and improvements:

  • Totally remade working with J2534 devices in BitBox Core
  • Various UI and stability fixes

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.3.2 rev 1 released

New families:

  • MB Delphi CRD3.XX TC1793 added to module MB Delphi Diesel CAN with reading/writing and checksums calculation
  • Haval Bosch MED17.8.10 added to module China Bosch Petrol with bench reading/OBD writing and checksums calculation. Now available for TESTS

Improvements and fixes:

    • Kia/Hyundai Continental SIM2K-141/341 fixed detection and reading will not be allowed for unknown ECU types
    • Renault Continental EMS3125 fixed writing for some ECU types
    • China Delphi MT92.1 fixed checksums calculation for some ECU types
    • Fixed CVN detection for Toyota Denso Gen2 CAN ECUs during identification
    • Beta ENDURO motorbikes with Continental M3C ECUs are now supported

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitSoftware Anniversary Promo!

To celebrate the 5 year anniversary of BitEdit software, 15% discount available is Master BitBox and BitEdit software activations until 27-06-2020.

Use the coupon code bitsoft15 at checkout.


The BitSoftware team are responsible for producing software packages designed for chiptuning beginners and professionals.

They currently offer 2 platforms:

bitbox_logo

BitBox – Software for reading and writing control unit memories.

BitEdit_logo

BitEdit – Software for editing calibrations within control unit maps.

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on by

BitBox 3.3.0 rev 1 released

New modules:

Continental M3C module released with following families:

  • FID 191: Ducati Continental M3C 9S12XD CAN with reading/writing and checksums cacluation
  • FID 192: Ducati Continental M3C 9S12XE CAN with reading/writing and checksums cacluation
  • FID 193: BRP Continental M3C 9S12XE CAN with reading/writing and checksums calculation
  • FID 194: Arctic Cat Continental M3C 9S12XE CAN with reading/writing and checksums calculation
  • FID 195: Kymco/Sherco/Stels/TGB Continental M3C 9S12XE CAN with reading/writing and checksums calculation
  • FID 196: KTM Continental M3C 9S12XE CAN with reading/writing and checksums calculation

Honda Marine module released with following families:

  • FID 228: Honda Marine M32R K-Line with reading/writing and checksums calculation
  • FID 229: Honda Marine K-Line reading for reading with automatical detection MCU

Suzuki Marine module released with following families:

  • FID 198: Suzuki Marine Mitsubishi MH8104F K-Line with reading/writing and checksums calculation

Improvements and fixes:

  • BMW Marelli MBC1(BMSE) added automatical reset adaptation values at the end of programming.
  • Kia/Hyundai Continental SIM2K-24x made better detection for SIM2K-242 ECU

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.2.9 rev 1 released

New modules:

Honda Moto Keihen module released and now ready for sale with following families:

  • FID 126: Honda Moto Keihin H8C 32/56KB K-Line with reading/writing and checksum calculation
  • FID 125: Honda Moto Keihin M32R/SPC 256KB K-Line with reading/writing and checksum calculation
  • FID 226: Honda Moto Keihin R8C 32/48/64/96/128KB K-Line with virtual reading/writing and checksum calculation
  • FID 227: Honda Moto Keihin SH7058 1MB K-Line with reading/writing and checksum calculation
  • FID 174: Honda Moto Keihin SPC 512KB K-Line with reading/writing and checksum calculation
  • FID 175: Honda Moto Keihin K-Line Reader – only reading with detection flash size and checksum test

BMW Motorrad module is now ready for sale with following families:

  • BMW BMSE (Marelli MBC1) with VR, writing, checksums calculations
  • BMW BMSK (M9.2) with reading, writing and checksums
  • BMW BMSKP (ME9.2.0) with reading, writing and checksums

Honda Marine Keihin module ready for tests with families:

  • Honda Marine Keihin M32R/SPC 256KB K-Line with reading/writing and checksum calculation
  • Honda Marine Keihin K-Line Reader – only reading with detection flash size and checksum test

Improvements and fixes:

  • Added virtual reading attempt for FID 27: Toyota Denso NEC D76F0XXX P5-CAN Type 1 when ECU is locked or OBD reading protection installed!
  • Fixed error handling in software in some cases

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.2.6 rev 1 released

New modules:

Renault Petrol CAN introduced with following families:

  • FID 139: Renault Continental EMS3110 TC1762 CAN with read/write and checksum calculation
  • FID 154: Renault Valeo V40/V42 SH7058S CAN with read/write and checksum calculation
  • Other ECU types will be supported ASAP

Ford Bosch MG1 Petrol CAN introduced with following families:

  • FID 180: Ford Bosch MG1CS015 TC277 CAN with read/write and checksum calculation
  • FID 181: Ford Bosch MG1CS018/MG1CS019 TC298 CAN with read/write and checksum calculation
  • Other ECU types will be supported ASAP

Denso SH7058/SH7059 CAN

  • FID 153: Denso SH7058/SH7059 CAN with reading/writing and checksum calculation.
  • Now supported Mitsubishi, Nissan, Subaru, Mazda, other ECU types are in test stage at this moment

Renault/Nissan Continental Diesel CAN [TEST]

  • FID 155: Renault SID305 TC1766 CAN with reading/writing and checksum calculation.
  • This module is in test and more ECU types will be added before release

New families:

  • FID 163: BMW Bosch MG1 MPC5777 ECU#2 now added to module BMW Fxx/Gxx Bosch MG1/MD1 E-NET for supporting double ECU vehicles
  • FID 164: BMW Bosch MG1 TC298 ECU#2 now added to module BMW Fxx/Gxx Bosch MG1/MD1 E-NET [TEST] for supporting double ECU vehicles

Improvements and fixes:

  • FID 220: DAF/Industrial Delphi ETC3 fixes for some ECU types
  • FID 221: Hyundai Delphi ETC3 now made writing and checksums calculation. Only Truck are supported!

UI Fixes:

  • Some cosmetic fixes with UI made

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.2.5 rev 1 – Mazda SkyActiv-D Added!

New modules:

  • Mazda SkyActiv-D Diesel CAN added with following families:
    Mazda Denso Diesel Gen3 Crypto SH72543 with reading/writing and checksum calculation
    Mazda Denso Diesel Gen3 Crypto SH72546 with reading/writing and checksum calculation
    Mazda Denso Diesel Gen3 SH72543(now in test mode) with reading/writing and checksums calculation
    Mazda Denso Diesel Gen4 MPC5746 with reading/writing and checksums calculation

New families:

  • Mazda Denso Gen4 (D11) MPC5746 added to module Mazda SkyActiv-G Petrol CAN with virtual reading/writing and checksum calculation
  • Mazda Mitsubishi Gen4 (M13/M16) MPC5746 added to module Mazda SkyActiv-G Petrol CAN with reading/writing and checksum calculation
  • Kia/Hyundai Kefico CPGDSH2.2x.x/CPEGD2.20.x TC1782 BSL added to module Kia/Hyundai Kefico CPxxxx Petrol CAN with reading/writing and checksum calculation

Improvements and fixes:

  • Fixed writing of some variations of Toyota Gen1 TCM ECUs
  • Added ECU type detection for BMW Exx Bosch EDC17C41/EDC17C50 if file is available on server
  • Added family to Identification.txt file created on file saving
  • Volvo Denso SH72xxx CAN writing made for safe

Master/Slave system:

  • Fixed writing original file without slave request on some families (SLAVE)
  • More information now shown in Master Files list (MASTER)
  • Added possibility to select and copy data from identification files in slave file view (MASTER)
  • Added possibility to download processed file(master file) from master files list (MASTER)
  • Filename generation fixed for downloading slave file (MASTER)

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.2.4 rev 1

New modules:

  • Kia/Hyundai Kefico CPxxxx Petrol CAN module now ready for tests with:
    FID 251: Kia/Hyundai Kefico CPGDSH2.2x.x/CPEGD2.20.x TC1782 2.5MB CAN read/write and checksum calculation
    Supported ECUs: CPEGD2.20.1, CPEGD2.20.2, CPEGD2.20.3, CPEGD2.20.4, CPGDSH2.26.1, CPGDSH2.24.4

New families:

  • China BYD TB10 Type 2 (FID:148) now added to module China Bosch Petrol with virtual reading/writing and checksum calculation

Improvements and fixes:

  • Bosch US6.0/MSE6.0 fixed identification and virtual reading.
  • Continental SIM2K-25x OBD writing fix for some vehicels with gateway
  • Continental SIM2K-25x/26x improved password reading
  • Various UI fixes

More Info

View Full Range of modules here.

bitbox_logo