Posted on

I/O Terminal Tool Siemens ECU Tool V48 Released

Siemens ECU TOOL v48 Released:

OPEL BOSCH ME155/ME76H4  Kline- Read/Write Flash + Eeprom, Change VIN/Mileage

OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage

Change VIN/Mileage function added to OPEL ME761/ME762

Some changes made in Opel/SAAB Trionic 8 ECUs software

Free for all owners of Siemens License.

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on

I/O Terminal Tool Denso V16 / Siemens ECU Tool V47 Released

DENSO ECU TOOL v16 Released:

Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC  DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56  eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Free for all owners of Denso License.

 

Siemens ECU TOOL v47 Released:

OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom

OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Free for all owners of Siemens License.

For more info and a list of supported ECU’s, please visit the product page here.

Posted on

Introducing I/O Terminal Tool

We are proud to announce the I/O Terminal Tool is now available at Chiptuningshop!

The I/O Terminal tool can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

It also supports some very tricky controllers which are not covered by other tools.

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

All operations are done over K-line or CAN bus without need to open ECU!

It currently supports BoschEasytronic, Denso, Marelli, and Siemens ECU’s. For more info click the desired plugin below:

Bosch Plugin
Denso Plugin
Siemens Plugin
Marelli Plugin
Easytronic Plugin

Posted on

Siemens Plugin for I/O Terminal Tool

 

The ultimate tool for Siemens ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

It works with Siemens ECU’s for Alfa, Citroen, Daewoo, Ford, Hyundai, Jaguar, Kia, Land Rover, Mercedes Benz, Peugeot, Opel, VAG, Vauxhall and Volvo.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

 

Supported ECU’s:

Alfa Romeo Simtec 75.3 Kline – Read/Write Flash + Emulated Eeprom

Daewoo Siemens/Kemsco D3 – Read/Write Flash + Emulated Eeprom

Kia/Hyundai Siemens SIMK31 – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIMK41 – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIM2K-34VR – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIM2K-48 – Read/Write Flash + Emulated Eeprom

Mercedes Benz Siemens/VDO MSM – Read/Write Flash + Emulated Eeprom
Mercedes Benz Siemens/VDO MSM 2.x – Read/Write Flash + Emulated Eeprom

Opel SIMTEC 70 – Read/Write Flash + Eeprom
Opel SIMTEC 71, 71.1, 71.5, 71.6, 75.5, 81, 81.1 – Read/Write Flash + Emulated Eeprom + Change Odometer
Opel BOSCH ME155/ME76H4 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Trionic 8 CAN – Read/Write Flash + Emulated Eeprom
Saab Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Jaguar / Land Rover Siemens SID201 – Read/Write Flash + Processor + Eeprom
Jaguar Siemens SID204 – Read/Write Flash + Processor + Eeprom

VAG Siemens SIMOS 3.3A / 3.4A – Read/Write Flash + Eeprom – BETA Version
VAG Siemens SIMOS 3PA / 3PB / 3PC / 3PD / 3PE / 3PG – Read/Write Flash + Eeprom
VAG Siemens SIMOS 6.2 – Read/Write Flash + Processor + Eeprom
VAG Siemens SIMOS 7.1 / 7.1A – Read/Write Flash + Eeprom – BETA Version
VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

Ford Siemens SIM210, SIM22, SIM24, SIM28, SIM29 – Read/Write Flash + Eeprom
Ford Siemens SID802, SID803, SID804 – Read/Write Flash + Processor + Eeprom + Change Odometer
Ford Siemens SID803A – Read/Write Flash + Eeprom + Change Odometer

Volvo Siemens SID803 – Read/Write Flash + Processor + Eeprom + Change Odometer
Volvo Siemens SID803A – Read/Write Flash + Eeprom + Change Odometer

PSA ECU Detect – Autodetects ECU Type for PSA
PSA Siemens SID 201 – Read/Write Flash + Processor + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode
PSA Siemens SID 801, 801A, 802, 804, 805, 806 – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code, Eeprom CRC Check
PSA Siemens SID 803 – Read/Write Flash + Processor + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code
PSA Siemens SID 803A – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code, Eeprom CRC Check
PSA Siemens SID 805 – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code

Posted on

Bosch Easytronic Plugin for I/O Terminal Tool

The ultimate tool for Bosch Easytronic Transmission ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a programmer connected, however it can accomplish these procedures without opening the ECU!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and flash memories

It supports Ford and Opel Easytronic Bosch ECU’s.

 

All operations are done over K-line without need to open ECU!

 

 

Supported ECU’s:

Ford and Opel Easytronic Bosch 29F200 Kline – Read/Write 29F200BB Flash, Read/Write 24c16 Eeprom

Ford and Opel Easytronic Bosch 29F400 Kline – Read/Write 29F400BB Flash, Read/Write 24c16 Eeprom

 

Posted on

Marelli Plugin for I/O Terminal Tool

The ultimate tool for Magneti Marelli ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify odometer mileage stored in eeprom memory.

It works with Siemens ECU’s for Fiat, Opel, Suzuki and Vauxhall.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

 

Supported ECU’s:

Suzuki Magneti Marelli Multijet MJD 6O2 Kline – Read/Write Flash + Processor + Eeprom

Suzuki Magneti Marelli 8DS CAN – Read/Write Flash + Eeprom

Opel Magneti Marelli Multijet MJD 6JO 1.3 Kline Z13DT – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ SPANSION Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH SPANSION – Read/Write Flash + Processor + Eeprom + Set Virgin Mode

Opel Magnetti Marelli Multijet MJD 6O3 1.3 CAN Z13DTH Read/Write Flash + Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 9GF CAN – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSF CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSW CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMW CAN – Read/Write Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 8GMF HW02 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMF HW03 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8DF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW204 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW407 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5SF3 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF3 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 59F  HW<100 CPU32 Kline – Read/Write Flash + Eeprom + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5NF.T1-IAW 5NF.T9 Kline – Read (Only) Flash, Read/Write Eeprom + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6JF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Posted on

Denso Plugin for I/O Terminal Tool

The ultimate tool for Denso ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a JTAG programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify odometer mileage stored in eeprom memory.

It works with Denso ECU’s for Mazda, Mitsubishi, Nissan, Opel, Suzuki, Vauxhall and Volvo.

Also included is a checksum correction facility for flash memories.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

 

Supported ECU’s:

Jaguar/ Jaguar XF 4.2SC DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Landrover / Range Rover AJ33 4.2 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Landrover P3.0NA DENSO 64F7058 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Opel Meriva, Corsa C 1.7 CDTI Hybrid ECU – Full R/W 64F7055, R/W 93C66 eeprom, show pin code , reset(virgin). (CAN & K-LINE)

Opel Vectra C/Signum 3.0 CDTI – Full R/W 64F7058, R/W 93C86 x2 eeprom , show pin code , odometer calibration, reset(virgin). (CAN)

Opel 1.7CDTI 110CV/125CV Z17DTJ/Z17DTR/Z17DTH/A17DTH/A17DTR Astra H, Astra J, Zafira B, Corsa D, Meriva B, Tigra B – Full R/W 64F7058, R/W 93C86 x3 eeprom , odometer calibration, show pincode , reset(virgin). Full R/W 64F7059, R/W 93C86 x4 eeprom , odometer calibration, show pin code , reset(virgin). (CAN)

Mazda 3,5,6 RF7/RF8 ECU -Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Mazda 2 1.5 from year 2010 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)

Mazda RX8 Denso – Full R/W 64F7055, R/W 93C56 eeprom. (CAN)

Nissan Navara, Xtrail, Pathfinder 2.5DCI 2005-2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Nissan Navara/Pathfinder D40 2.5DCI from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)

Nissan Xtrail, Almera Tinos 2.2DCI 136v – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)

Mitsubishi Delica D5/Outlander 2.2DID 4N14 from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)

Mitsubishi L200, Pajero 4D56/4M41 2.5DID 136CV <2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Mitsubishi L200, Pajero 4D56/4M41 2.5/3.2 DID 2009> – Full R/W 64F7059, R/W 93C86 eeprom. (CAN)

Subaru Forester 2.0D KH 2007 – Full R/W 64F7058, R/W 93C86 eeprom (CAN)

Suzuki 1.3 <2007 – Full R/W 64F7055 R/W 93C56 eeprom. (CAN)

Suzuki 1.3, 1.5, 1.6 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)

Suzuki Jimny <2007 1.3 – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)

Volvo V50, S40, V40 2006-2010 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)

Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)

Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7055, full R/W external flash 29LV200BC , R/W 93C56 eeprom. (CAN)

Volvo XC90 3.2L YC 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)

Posted on

MAGPro2 X17 and T-BOOT ver 9.1.0 released

MAGPro2 X17 and T-BOOT ver 9.1.0 released

 

1. all BMW Fxx series are supported now directly without sending ECUs to our lab.

PASSWORD READING solution for the BMW F Series vehicles which were released in the last update of X17 (ver9.0.0) both for X17 and for T-BOOT is now available without shipping ECU by using a new plugin: MAGP1.18 (MAGPro2 BMW F Series Unlock plugin).

Supported controllers:

Bosch EDC17C41

Bosch EDC17CP45

Bosch EDC17C50

Bosch EDC17C56

For more info, click here.

2. added Mercedes EDC17CP46 with new protection IROM & EEPROM BL R/W/CHK

Before allowing operations by Bootloader the ECU must be unlocked. The ECU must be sent to a MMS Service Points and it will be sent back to the customer on the same day by UPS Express. For details consult our MMS Helpdesk Service Requests section. Price of the service is 20 red coins.

 

3. added VOLVO EDC17CP48 IROM & EEPROM BL R/W/CHK

Before allowing operations by Bootloader the ECU must be unlocked. The ECU must be sent to a MMS Service Points and it will be sent back to the customer on the same day by UPS Express. For details consult our MMS Helpdesk Service Requests section. Price of the service is 20 red coins.

 

4. added OPEL EDC17C59 IROM & EEPROM BL R/W/CHK

Before allowing operations by Bootloader the ECU must be unlocked. The ECU must be sent to a MMS Service Points and it will be sent back to the customer on the same day by UPS Express. For details consult our MMS Helpdesk Service Requests section. Price of the service is 20 red coins.

 

5. Bugfixes and improvments for MAGPro2 X17 and TBOOT:

1. Path to last used file is now saved. No need to browse all folders each time.

2. Mazda RF8x protocol reenabled.

3. VAG UDS TPROT VERSION function reenabled

 

6. Bugfixes and improvments for MAGPro2 X17:

1. DSG DQ200 and DQ250C30 improved identification process (hangouts).

2. VAG UDS TPROT VERSION function re-enabled

3. Mazda RF8x protocol re-enabled.