Tag: iaw

Posted on by

Flex version 5.4.0.0

NEW OBD, Bench and Boot solutions 

Our latest FLEX update allows you to program the DELPHI CRD11 engine control units equipped on Mercedes vehicles, in OBD.

MAGICMOTORSPORT releases version 5.4.0.0 of FLEX for working on 2007 Mercedes-Benz C-Class (W204) and E-Class (W211) cars to name a few. With this new OBD protocol, you can read the ECU in just 8 minutes while writing takes only 2 minutes and 30 seconds.

Bench solutions are also now available for BOSCH ME7.0 and ME7.0.1 engine control units that come equipped on Volvo vehicles. Along with new Bootloader solutions for Magneti Marelli IAW5SF8, IAW5SF9, IAW5SFH equipped on FCA group vehicles.

New protocols added:

  • MB DELPHI CRD11 OBD: Read / Write / Checksum Maps
  • FCA BOSCH EDC15C5 OBD: Read / Write / Checksum / Recovery Maps
  • Volvo ME7.0.1 BENCH: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
  • Volvo ME7.0 BENCH: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
  • VAG BOSCH ME7.1 BOOT: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
  • PSA VISTEON DCU-102 BOOT: Read / Write / Checksum IntFlash
  • FCA Marelli IAW5SF8 (HW4xx) BOOT: Read / Write / Checksum IntFlash
  • IVECO Marelli IAW5SF8 (HW4xx) BOOT: Read / Write / Checksum IntFlash
  • FCA Marelli IAW5SF9 (HW4xx) BOOT: Read / Write / Checksum IntFlash
  • FCA Marelli IAW5SFH (HW4xx) BOOT: Read / Write / Checksum IntFlash
  • KIA CONTINENTAL SIM2K-259 BOOT: Read / Write / Checksum IntFlash, Read / Write / Checksum ExtEeprom, Full Backup

Bug Fixes:

  • AUDI BOSCH MED9.1.2 – BDM external flash writing fixed
  • MB BOSCH MED17.7.3 OBD writing fixed

Software Improvements:

  • Added New CRC for VW BOSCH MED17.1.62
  • Added New CRC FORD BOSCH MD1CS005
  • Added OBD support for EDC15VM + _29F800
More info and pricing
Posted on by

I/O Terminal Tool Marelli V45 Released

Marelli ECU TOOL v45 Released:

Fiat Magneti Marelli IAW 5SF.XX K-line
Read/Write ST10F280 Flash + Emulated Eeprom + Change odometer

Fiat Magneti Marelli IAW 5SF4 K-line
Read/Write ST10F296 Flash + Emulated Eeprom + Change odometer

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Marelli V44 Released

Marelli ECU TOOL v44 Released:

Fiat Magneti Marelli IAW 4AF HW204 ST10F168  Kline:
Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW407 ST10F269  Kline:
Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens V50 + Denso V19 Update

Siemens ECU TOOL v50 Released:

VAG Siemens SIMOS 3PE – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PD – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PG – Read/Write Flash + Eeprom

KIA/HYUNDAI Siemens/Continental SIMK41 – Read/Write Flash + Emulated Eeprom

KIA/HYUNDAI Siemens/Continental SIM2K-48 – Read/Write Flash + Emulated Eeprom

 

Denso ECU TOOL v19 Released:

Correction made on Suzuki Swift 1.3 with 64F7055 processor

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens ECU Tool V49 Released

Siemens ECU TOOL v49 Released:

VAG Siemens SIMOS 3PA – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PB – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PC – Read/Write Flash + Eeprom

VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens ECU Tool V48 Released

Siemens ECU TOOL v48 Released:

OPEL BOSCH ME155/ME76H4  Kline- Read/Write Flash + Eeprom, Change VIN/Mileage

OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage

Change VIN/Mileage function added to OPEL ME761/ME762

Some changes made in Opel/SAAB Trionic 8 ECUs software

Free for all owners of Siemens License.

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Denso V16 / Siemens ECU Tool V47 Released

DENSO ECU TOOL v16 Released:

Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC  DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56  eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Free for all owners of Denso License.

 

Siemens ECU TOOL v47 Released:

OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom

OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Free for all owners of Siemens License.

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

Introducing I/O Terminal Tool

We are proud to announce the I/O Terminal Tool is now available at Chiptuningshop!

The I/O Terminal tool can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

It also supports some very tricky controllers which are not covered by other tools.

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

All operations are done over K-line or CAN bus without need to open ECU!

It currently supports Bosch, Easytronic, Denso, Marelli, and Siemens ECU’s. For more info click the desired plugin below:

Bosch Plugin
Denso Plugin
Siemens Plugin
Marelli Plugin
Easytronic Plugin

Buy Now

Posted on by

Marelli Plugin for I/O Terminal Tool

The ultimate tool for Magneti Marelli ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify odometer mileage stored in eeprom memory.

It works with Siemens ECU’s for Fiat, Opel, Suzuki and Vauxhall.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

Buy Now

 

Supported ECU’s:

Suzuki Magneti Marelli Multijet MJD 6O2 Kline – Read/Write Flash + Processor + Eeprom

Suzuki Magneti Marelli 8DS CAN – Read/Write Flash + Eeprom

Opel Magneti Marelli Multijet MJD 6JO 1.3 Kline Z13DT – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH SPANSION – Read/Write Flash + Processor + Eeprom + Set Virgin Mode

Opel Magnetti Marelli Multijet MJD 6O3 1.3 CAN Z13DTH – Read/Write Flash + Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 9GF CAN – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSF CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSW CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMW CAN – Read/Write Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 8GMF HW02 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMF HW03 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8DF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW204 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW407 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5SF3 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF3 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 59F  HW<100 CPU32 Kline – Read/Write Flash + Eeprom + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5NF.T1-IAW 5NF.T9 Kline – Read (Only) Flash, Read/Write Eeprom + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6JF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode