Tag: Volvo

Posted on by

I/O Terminal Tool Bosch V6 Released

Bosch ECU TOOL v6 Released:

Volvo Bosch EDC15C11 CAN / K-Line
Read/Write 29F400BT Flash + 95P08 Eeprom

PSA M7.4.4  K-line:
Read/Write 29F400BB Flash + 95080 Eeprom

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

Bosch Plugin for I/O Terminal Tool

The ultimate tool for Bosch ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a BDM/Boot programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It works with Bosch ECU’s for Chrysler, Citroen, Fiat, Honda, Hyundai, Jeep, Kia, Mercedes Benz, Peugeot, Smart, Toyota, VAG, and Volvo.

 

All operations are done over K-line without need to open ECU!

 

Buy Now

 

Supported ECU’s:

CHRYSLER Bosch EDC15C5 K-Line – Read/Write Flash + Eeprom

FIAT Bosch ME7.3.1 K-Line BOOTPIN – Read/Write Flash + Eeprom
FIAT Bosch ME7.3.H4 K-Line BOOTPIN – Read/Write Flash + Eeprom
FIAT Bosch ME7.6.3 K-Line – Read/Write Flash + Eeprom + Reset to Virgin Mode
FIAT Bosch ME7.9.10 K-Line – Read/Write Flash + Eeprom + Reset to Virgin Mode

HONDA Bosch ME7.9.3 K-Line – Read/Write Flash + Eeprom
HONDA Bosch EDC15C7 K-Line – Read/Write Flash + Eeprom

HYUNDAI / KIA Bosch/KEFICO ME7.9.0 K-Line – Read/Write Flash + Eeprom
HYUNDAI / KIA Bosch/KEFICO M(G)7.9.8 K-Line – Read/Write Flash + Eeprom
HYUNDAI / KIA Bosch EDC15C7 K-Line – Read/Write Flash + Eeprom

JEEP Bosch EDC15C5 K-Line – Read/Write Flash + Eeprom

MERCEDES BENZ Bosch EDC15C6 K-Line – Read/Write Flash + Eeprom

OPEL Bosch ME155/ME76H4  Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch ME763 ST10F275 Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch EDC15C7 K-line – Read/Write 29F400BT Flash + 95P08 Eeprom

PSA Bosch M7.4.4 K-Line – Read/Write Flash + Eeprom
PSA Bosch ME7.4.4 K-Line – Read/Write Flash + Eeprom, Reset to Virgin Mode
PSA Bosch ME7.4.5 K-Line – Read/Write Flash + Eeprom, Reset to Virgin Mode
PSA Bosch EDC15C2 (1 X Plug) K-Line – Read/Write Flash + Eeprom

SMART Bosch ME7.7.0 K-Line – Read/Write Flash + Eeprom
SMART Bosch EDG15C-5.x K-Line – Read/Write Flash + Eeprom

TOYOTA Bosch ME7.9.5 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch ME7.9.51 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch M7.9.5 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch M7.9.52 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch EDC15C9 K-Line – Read/Write Flash + Eeprom

VAG Bosch ME7.5 K-Line – Read/Write Flash + Eeprom
VAG Bosch ME7.5 1M K-Line – Read/Write Flash + Eeprom
VAG Bosch ME7.5.10 K-Line – Read/Write Flash + Eeprom
VAG Bosch MED7.5.11 K-Line – Read/Write Flash + Eeprom
VAG Bosch MED7.5.20 K-Line – Read/Write Flash + Eeprom
VAG Bosch EDC15P+ K-Line – Read/Write Flash + Eeprom
VAG Bosch EDC15VM+ K-Line – Read/Write Flash + Eeprom

VOLVO Bosch EDC15C3 K-Line – Read/Write Flash + Eeprom
VOLVO Bosch EDC15C11 CAN/K-Line – Read/Write Flash + Eeprom
VOLVO Bosch ME7.0 CAN – Read/Write Flash + Eeprom + Flash CRC Fix
VOLVO Bosch EDC16C31 29bit CAN until year 2008 – Read/Write M58BW0160 Flash (95320 Eeprom not yet supported!)
Please note: Volvo OBD support requires latest hardware, or older hardware to be modified, for more info  >>Click Here<<

 

Posted on by

Used ByteShooter Master

Used ByteShooter Master (V3.34).

This is a master tool which reads open bins files, also slaves can be attached.

Included are car modules: 1,2,4,5,7…. VAG DSG (K-Line versions), EDC17/MEDC17 OBD, all basic car protocols are available!

ALL truck modules and protocols activated, includes K-Line, CAN and Volvo RS485.

Complete with the following cables:

  • 16 Pin OBD cable (K-Line position pin 7)
  • 16 Pin OBD cable (K-Line position pin 3)
  • DAF OBD Round Cable
  • Daily OBD Cable
  • Mercedes Benz Temic PLD Cable
  • Man TGA Cable
  • Renault LKW Cable
  • Scania MS6.2 OBD Cable
  • Scania EMS S7 Cable
  • Volvo RS485 Cable
  • VAG EDC15x Cable

Additional modules, recoding and V4.00 upgrade is available at additional cost if required.

Buy Now

 

Posted on by

MAGPro2 X17 / T-BOOT software ver 9.6.0 released

Protocols added:

  • VOLVO EDC17CP48 BL R/W/CHK, BL PASS – available by MAGP1.18 plugin
  • HONDA EDC17CP50 TP9 BL R/W/CHK, BL PASS – available by MAGP1.18 plugin
  • Chevrolet Bosch AC Delco EDC17C59 BL R/W/CHK, BL PASS – available by MAGP1.18 plugin
  • VAG Bosch MED17.5.2 OBD VR/W/CHK (protocol available for X17 only)

Bugfixes/improvements:

  • FORD EDC16C34 fixed injectors coding procedure after OBD write.
  • New manuals available on MMS Helpdesk
  • EDC17C59/EDC17Cp47 crc improvment
  • SIMOS8.4 crc fix
  • EDC17C79 crc fix
Special thanks for Pawel – for his hard work in development process. Never give up!
Posted on by

I/O Terminal Tool Siemens V50 + Denso V19 Update

Siemens ECU TOOL v50 Released:

VAG Siemens SIMOS 3PE – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PD – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PG – Read/Write Flash + Eeprom

KIA/HYUNDAI Siemens/Continental SIMK41 – Read/Write Flash + Emulated Eeprom

KIA/HYUNDAI Siemens/Continental SIM2K-48 – Read/Write Flash + Emulated Eeprom

 

Denso ECU TOOL v19 Released:

Correction made on Suzuki Swift 1.3 with 64F7055 processor

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens ECU Tool V49 Released

Siemens ECU TOOL v49 Released:

VAG Siemens SIMOS 3PA – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PB – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PC – Read/Write Flash + Eeprom

VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens ECU Tool V48 Released

Siemens ECU TOOL v48 Released:

OPEL BOSCH ME155/ME76H4  Kline- Read/Write Flash + Eeprom, Change VIN/Mileage

OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage

Change VIN/Mileage function added to OPEL ME761/ME762

Some changes made in Opel/SAAB Trionic 8 ECUs software

Free for all owners of Siemens License.

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Denso V16 / Siemens ECU Tool V47 Released

DENSO ECU TOOL v16 Released:

Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC  DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56  eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Free for all owners of Denso License.

 

Siemens ECU TOOL v47 Released:

OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom

OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Free for all owners of Siemens License.

For more info and a list of supported ECU’s, please visit the product page here.