This BDM Style probe allows reading/writing of the VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the MPPS OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the ByteShooter OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the FG Tech OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the AVDI OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This kit allows you to connect your MPPS easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your MPPS to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to MPPS, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
This kit allows you to connect your ByteShooter easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your ByteShooter to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to ByteShooter, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
This cable set allows you to connect to VAG DSG controllers and can be used to read and write (where possible) direct from the DSG connector, since reading over OBD some versions is not possible.
The set includes cables for DQ200, DQ200, DQ250, DQ500, DL501, VL381 and is fitted with an OBD female connector.
12V fly leads are provided allowing the user connect to a power supply. The CAN bus communication lines are fitted with integral termination resistor where necessary.
This kit allows you to connect your AVDI easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your AVDI to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to the AVDI interface, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
This cable allows you to connect most flash tools to VL381 Multi-Tronic CVT controllers. This can be used to read out the original file direct from the Gearbox connector as reading over OBD is not always possible.
It can also be used to read all versions of VL381 on the bench.
The cable is CAN bus wired (with integral termination resistor) and is fitted with an OBD2 female plug allowing connection any flash tool with an OBD2 cable.
This cable allows you to connect most flash tools to VAG DSG DL501 S-Tronic controllers. This can used to read the original file direct from the DSG connector.
It can be used to read all versions of DL501 on the bench.
The cable has CAN wired and is fitted with an OBD2 female plug allowing connection any flash tool with an OBD2 cable.
