Tag: read

Posted on by

BitBox 3.2.2 rev 1

New modules:

Mazda SkyAktiv-G Petrol CAN added and ready for tests with following families:

  • Mazda Denso Gen3 SH72543 (read/write/cs calculation)
  • Mazda Denso Gen3 Crypto SH72543 (read/write/cs calculation)
  • Mazda Denso Gen4 Crypto MPC5746 (read/write/cs calculation)
  • Mazda Mitsubishi Gen3 CX9 MH8501 (read/write/cs calculation)
  • Mazda Mitsubishi Gen3 MH8501 (read/write/cs calculation)

 

GM ACDelco Petrol Gen2 CAN

Attention! This module does not support automatic authentication. It requires authentication key for every ECU/vehicle for reading/writing. Now supported:

  • GM ACDelco E92 Gen2 CAN (read/write/cs calculation)
  • GM ACDelco E39A Gen2 CAN (read/write/cs calculation)
  • More ECU types will be added ASAP.

 

New families:

  • Infiniti Delphi CRD3.XX TC1797 CAN (read/write/cs calculation) added to module MB Delphi Diesel CAN
  • China Delphi MT62.1 MPC5634 CAN (read/write) added to module China Delphi Petrol
  • China Delphi MT22.1 IAC MC9S12XEQ512 (read/write/cs calculation) added to module China Delphi Petrol
  • Hino EDC17CV41 TC1797 added to module Trucks/Industrial Bosch EDC17CV41 CAN (virtual read/write/cs calculation)

Improvements and fixes:

  • Added interface for manual entering key value for GM ACDelco Gen2
  • Minor fixes of UI interface

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitSoftware Promo!

13% discount available on BitBox and BitEdit software activations until 13-09-2019.

Use the coupon code bitsoft13 at checkout.


The BitSoftware team are responsible for producing software packages designed for chiptuning beginners and professionals.

They currently offer 2 platforms:

bitbox_logo

BitBox – Software for reading and writing control unit memories.

BitEdit_logo

BitEdit – Software for editing calibrations within control unit maps.

Both software packages are managed by a Senselock USB dongle protection system, all software modules can be activated on a single dongle. The program has a client-server architecture needs to be connected to the Internet.

Posted on by

BitBox 3.2.0 rev 1

New families:

  • MB Delphi CRD2.XX (FID:217) added to MB Delphi Diesel CAN module with reading/writing and checksums calculation
  • BMW Exx Bosch MEVD17.2.6 (FID:138) added to BMW Exx Bosch CAN module with virtual reading/writing and checksums calculation

Improvements and fixes:

  • Fixed master/slave system for recovery files
  • Some renaming and fixes in interfaces
  • Improved system logging

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.9 rev 1

New modules:

  • China Diesel CAN introduced with FID145: China Delphi DCM3.7AP CAN with reading/writing and checksum calculation

New families:

Improvements and fixes:

  • Motorola NGC3 added detection of unsupported old types of ECU during identification
  • Continental GPEC2A 2018+ fixed bug with wrong family selection
  • Fixed authentication for ME17.8.8 bug
  • Identification and virtual reading fix for BMW Marelli MBC1
  • Fixed writing coding in BMW Fxx and BMW Gxx ENET in some cases

Corrections and improvements:

  • Added special power adapter pin configuration and now PCM PowerBox also supported.
  • Cars/Tracks section in car list was split to Cars/LCV and Trucks/Industrial

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.8 rev 1

New modules:

  • MB Delphi Diesel CAN with Delphi CRD3.XX family with reading/writing and checksum calculation.
  • Trucks Delphi ETC3 CAN with 2 families:
    • DAF / Industrial Delphi ETC3 (FID: 220)
    • Hyundai Delphi ETC3 (FID: 221) / TEST /

New families:

  • China Bosch ME17.8.8 SAIC added to China Bosch Petrol module

Improvements and fixes:

  • GPEC2A 2018+ writing algorithm remade, now writing flash and maps and fix P1400 problem. New protection removal patch
  • GPEC3 HW2 finally tested and remove protection now works!
  • Sim2K-25X, Sim2K-260, Sim271 made reading flash and maps data for valid checksums patch
  • Added detection of Gen2 (new protection) for ACDelco modules

Corrections and improvements:

  • Unlicensed identification released. Now you can do module identification even when module is not purchased. In some cases identification will be reduced.
  • Master/Slave system fixes

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.7 rev 1

New families:

  • SsangYong Delphi DCM6.2AP-6D with new MCU added to SsangYong Delphi Diesel with read/write and checksums correction.

Improvements and fixes:

Master / Slave:

  • CVN fix for Toyota made when Master creating file for slave
  • Slave now can write original file without Master, if file was read from vehicle.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.6 rev 1 – MB Siemens/Continental SIM271

New module:

MB Siemens/Continental SIM271 added with 2 new families.

  • Continental SIM271DE2.0 TC1796 with bench reading/writing and checksum calculation
  • Siemens SIM271KE2.0 TC1796 with bench reading/writing and checksum calculation

New families:

Improvements and fixes:

  • PSA Delphi DCM6.2A now made full flash reading
  • Fixed writing start for MB MED17 families

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.5 rev 2 – Kia / Hyundai SIM2K-25x / 26x

New module:

Kia/Hyundai Continental Sim2K-25x/26x BSL added in test mode.

FID:150 Continental SIM2K-250/251/253 TC1782 read/write with special adapter BITS001. CS calculation and CVN fix!
Continetnal SIM2K-25x with TC1767 and SIM2K-26x with TC1793 are already in development and will be added as soon as possible!

Improvements and UI fixes:

  • Personal files crypt system now released. Contact to support for details!
  • UI fixes and backup system made for new module

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.4 rev 4 – PSA EDC17C10 added!

Module PSA Delphi Diesel CAN now renamed and refactored to PSA Diesel CAN.

New families:

Improvements and fixes in families:

  • Volvo Denso bench module optimized for working with more J2534 devices
  • Infiniti MED17.7.2 added more ECU types
  • Toyota Denso Gen2 Type 2 fixed writing when file was not found on server
  • Toyota Denso Gen1 CAN fixed virtual reading for slave system
  • Delphi MT2x done some improvements for more stable work
  • Toyota TCM virtual reader fixed identification for some ECU types
  • Added some ECU types for China Bosch ME7.8.8 K-Line
  • Rotax MSE3.7 K-Line module totally remade
  • ACDelco families now require original file now for calculation additional torque monitoring checksums. Checksums fixes made for: E39, E39A, E78, E87, E83, E98, E92.

GUI fix and improvements:

  • Added automatically log request for support team
  • Application loading improvement

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.3 rev 1 released

New families and improvements:

  • Infiniti Bosch MED17.7.2 (FID:208) added to MB Bosch MED17 CAN module in test mode.
  • MB Bosch EDC17CP01 (FID:207) added to MB Bosch EDC17 CAN module in test mode
  • Maserati with Bosch EDC17C79 is now supported with FID:107

Fixes:

  • Fixed uploading file with correct checksum for slave. Now master will be asked about uploading

 

More Info

View Full Range of modules here.

bitbox_logo