Tag: pin

Posted on by

Improved Design! Universal ECU Pinout Cable

This universal pin out cable allows you to connect easily and comfortably to most types control units.

A variety of pins and extra connections are now used, so you can connect to a many different types of ECU’s.

The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.

It features:

  • Female OBD2 port
  • Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
  • LED indicator to confirm when ECU is ON.
  • 6 x 12V connectors for ECU
  • 6 x GND connectors for ECU
  • 3 x switched ignition connectors for ECU
  • Switched ECU Power (ON/OFF)
  • Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
  • Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
  • 2 x CAN Low
  • 2 x CAN High
  • 2 x K-Line
  • 2 x L-Line
  • Kline with diode N4148 for reset function
  • Bootpins: 560Ω / 1KΩ / 4.7KΩ
Buy Now

 

Posted on by

Bosch Plugin for I/O Terminal Tool

The ultimate tool for Bosch ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a BDM/Boot programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It works with Bosch ECU’s for Chrysler, Citroen, Fiat, Honda, Hyundai, Jeep, Kia, Mercedes Benz, Peugeot, Smart, Toyota, VAG, and Volvo.

 

All operations are done over K-line without need to open ECU!

 

Buy Now

 

Supported ECU’s:

CHRYSLER Bosch EDC15C5 K-Line – Read/Write Flash + Eeprom

FIAT Bosch ME7.3.1 K-Line BOOTPIN – Read/Write Flash + Eeprom
FIAT Bosch ME7.3.H4 K-Line BOOTPIN – Read/Write Flash + Eeprom
FIAT Bosch ME7.6.3 K-Line – Read/Write Flash + Eeprom + Reset to Virgin Mode
FIAT Bosch ME7.9.10 K-Line – Read/Write Flash + Eeprom + Reset to Virgin Mode

HONDA Bosch ME7.9.3 K-Line – Read/Write Flash + Eeprom
HONDA Bosch EDC15C7 K-Line – Read/Write Flash + Eeprom

HYUNDAI / KIA Bosch/KEFICO ME7.9.0 K-Line – Read/Write Flash + Eeprom
HYUNDAI / KIA Bosch/KEFICO M(G)7.9.8 K-Line – Read/Write Flash + Eeprom
HYUNDAI / KIA Bosch EDC15C7 K-Line – Read/Write Flash + Eeprom

JEEP Bosch EDC15C5 K-Line – Read/Write Flash + Eeprom

MERCEDES BENZ Bosch EDC15C6 K-Line – Read/Write Flash + Eeprom

OPEL Bosch ME155/ME76H4  Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch ME763 ST10F275 Kline – Read/Write Flash + Eeprom,  Change VIN/Mileage
OPEL Bosch EDC15C7 K-line – Read/Write 29F400BT Flash + 95P08 Eeprom

PSA Bosch M7.4.4 K-Line – Read/Write Flash + Eeprom
PSA Bosch ME7.4.4 K-Line – Read/Write Flash + Eeprom, Reset to Virgin Mode
PSA Bosch ME7.4.5 K-Line – Read/Write Flash + Eeprom, Reset to Virgin Mode
PSA Bosch EDC15C2 (1 X Plug) K-Line – Read/Write Flash + Eeprom

SMART Bosch ME7.7.0 K-Line – Read/Write Flash + Eeprom
SMART Bosch EDG15C-5.x K-Line – Read/Write Flash + Eeprom

TOYOTA Bosch ME7.9.5 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch ME7.9.51 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch M7.9.5 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch M7.9.52 K-Line – Read/Write Flash + Eeprom
TOYOTA Bosch EDC15C9 K-Line – Read/Write Flash + Eeprom

VAG Bosch ME7.5 K-Line – Read/Write Flash + Eeprom
VAG Bosch ME7.5 1M K-Line – Read/Write Flash + Eeprom
VAG Bosch ME7.5.10 K-Line – Read/Write Flash + Eeprom
VAG Bosch MED7.5.11 K-Line – Read/Write Flash + Eeprom
VAG Bosch MED7.5.20 K-Line – Read/Write Flash + Eeprom
VAG Bosch EDC15P+ K-Line – Read/Write Flash + Eeprom
VAG Bosch EDC15VM+ K-Line – Read/Write Flash + Eeprom

VOLVO Bosch EDC15C3 K-Line – Read/Write Flash + Eeprom
VOLVO Bosch EDC15C11 CAN/K-Line – Read/Write Flash + Eeprom
VOLVO Bosch ME7.0 CAN – Read/Write Flash + Eeprom + Flash CRC Fix
VOLVO Bosch EDC16C31 29bit CAN until year 2008 – Read/Write M58BW0160 Flash (95320 Eeprom not yet supported!)
Please note: Volvo OBD support requires latest hardware, or older hardware to be modified, for more info  >>Click Here<<

 

Posted on by

I/O Terminal Tool Siemens V50 + Denso V19 Update

Siemens ECU TOOL v50 Released:

VAG Siemens SIMOS 3PE – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PD – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PG – Read/Write Flash + Eeprom

KIA/HYUNDAI Siemens/Continental SIMK41 – Read/Write Flash + Emulated Eeprom

KIA/HYUNDAI Siemens/Continental SIM2K-48 – Read/Write Flash + Emulated Eeprom

 

Denso ECU TOOL v19 Released:

Correction made on Suzuki Swift 1.3 with 64F7055 processor

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens ECU Tool V49 Released

Siemens ECU TOOL v49 Released:

VAG Siemens SIMOS 3PA – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PB – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PC – Read/Write Flash + Eeprom

VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

Abrites AVDI VAG AN055 Direct ECU CAN Cable

This adapter cable allows you to connect to the CAN bus communication wires directly at the ECU, whilst utilising the OBD port for all other connections.

This bypasses the CAN gateway as required when using the AN055 function on MED17 and EDC17 controllers.

It is equipped with an OBD female port to attach to your AVDI tool, an OBD male port to connect to the vehicle and a 3 metre cable with CAN connections via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.

The adapter is made using high quality OBD2 moulded connectors. The K-Line is also wired, allowing use on other applications.

 

Buy Now

User Manual

 

Posted on by

I/O Terminal Tool Siemens ECU Tool V48 Released

Siemens ECU TOOL v48 Released:

OPEL BOSCH ME155/ME76H4  Kline- Read/Write Flash + Eeprom, Change VIN/Mileage

OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage

Change VIN/Mileage function added to OPEL ME761/ME762

Some changes made in Opel/SAAB Trionic 8 ECUs software

Free for all owners of Siemens License.

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Denso V16 / Siemens ECU Tool V47 Released

DENSO ECU TOOL v16 Released:

Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC  DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56  eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Free for all owners of Denso License.

 

Siemens ECU TOOL v47 Released:

OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom

OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Free for all owners of Siemens License.

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

Introducing I/O Terminal Tool

We are proud to announce the I/O Terminal Tool is now available at Chiptuningshop!

The I/O Terminal tool can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

It also supports some very tricky controllers which are not covered by other tools.

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

All operations are done over K-line or CAN bus without need to open ECU!

It currently supports Bosch, Easytronic, Denso, Marelli, and Siemens ECU’s. For more info click the desired plugin below:

Bosch Plugin
Denso Plugin
Siemens Plugin
Marelli Plugin
Easytronic Plugin

Buy Now

Posted on by

Siemens Plugin for I/O Terminal Tool

 

The ultimate tool for Siemens ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

It works with Siemens ECU’s for Alfa, Citroen, Daewoo, Ford, Hyundai, Jaguar, Kia, Land Rover, Mercedes Benz, Peugeot, Opel, VAG, Vauxhall and Volvo.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

Buy Now

 

Supported ECU’s:

Alfa Romeo Simtec 75.3 Kline – Read/Write Flash + Emulated Eeprom

Daewoo Siemens/Kemsco D3 – Read/Write Flash + Emulated Eeprom

Kia/Hyundai Siemens SIMK31 – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIMK41 – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIM2K-34VR – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIM2K-48 – Read/Write Flash + Emulated Eeprom

Mercedes Benz Siemens/VDO MSM – Read/Write Flash + Emulated Eeprom
Mercedes Benz Siemens/VDO MSM 2.x – Read/Write Flash + Emulated Eeprom

Opel SIMTEC 70 – Read/Write Flash + Eeprom
Opel SIMTEC 71, 71.1, 71.5, 71.6, 75.5, 81, 81.1 – Read/Write Flash + Emulated Eeprom + Change Odometer
Opel BOSCH ME155/ME76H4 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Trionic 8 CAN – Read/Write Flash + Emulated Eeprom
Saab Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Jaguar / Land Rover Siemens SID201 – Read/Write Flash + Processor + Eeprom
Jaguar Siemens SID204 – Read/Write Flash + Processor + Eeprom

VAG Siemens SIMOS 3.3A / 3.4A – Read/Write Flash + Eeprom – BETA Version
VAG Siemens SIMOS 3PA / 3PB / 3PC / 3PD / 3PE / 3PG – Read/Write Flash + Eeprom
VAG Siemens SIMOS 6.2 – Read/Write Flash + Processor + Eeprom
VAG Siemens SIMOS 7.1 / 7.1A – Read/Write Flash + Eeprom – BETA Version
VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

Ford Siemens SIM210, SIM22, SIM24, SIM28, SIM29 – Read/Write Flash + Eeprom
Ford Siemens SID802, SID803, SID804 – Read/Write Flash + Processor + Eeprom + Change Odometer
Ford Siemens SID803A – Read/Write Flash + Eeprom + Change Odometer

Volvo Siemens SID803 – Read/Write Flash + Processor + Eeprom + Change Odometer
Volvo Siemens SID803A – Read/Write Flash + Eeprom + Change Odometer

PSA ECU Detect – Autodetects ECU Type for PSA
PSA Siemens SID 201 – Read/Write Flash + Processor + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode
PSA Siemens SID 801, 801A, 802, 804, 805, 806 – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code, Eeprom CRC Check
PSA Siemens SID 803 – Read/Write Flash + Processor + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code
PSA Siemens SID 803A – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code, Eeprom CRC Check
PSA Siemens SID 805 – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code

Posted on by

Marelli Plugin for I/O Terminal Tool

The ultimate tool for Magneti Marelli ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify odometer mileage stored in eeprom memory.

It works with Siemens ECU’s for Fiat, Opel, Suzuki and Vauxhall.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

Buy Now

 

Supported ECU’s:

Suzuki Magneti Marelli Multijet MJD 6O2 Kline – Read/Write Flash + Processor + Eeprom

Suzuki Magneti Marelli 8DS CAN – Read/Write Flash + Eeprom

Opel Magneti Marelli Multijet MJD 6JO 1.3 Kline Z13DT – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH SPANSION – Read/Write Flash + Processor + Eeprom + Set Virgin Mode

Opel Magnetti Marelli Multijet MJD 6O3 1.3 CAN Z13DTH – Read/Write Flash + Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 9GF CAN – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSF CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSW CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMW CAN – Read/Write Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 8GMF HW02 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMF HW03 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8DF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW204 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW407 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5SF3 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF3 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 59F  HW<100 CPU32 Kline – Read/Write Flash + Eeprom + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5NF.T1-IAW 5NF.T9 Kline – Read (Only) Flash, Read/Write Eeprom + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6JF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode