How fast is it?
The calibration write time is around 45 seconds.
The first flash takes between 5 min to 7 min depending on the platform.
Reading is virtual read
Can I flash back to original?
Yes, back to stock feature is available!
What about the flash counters?
Flash counters are reset and fixed to 0 after first flash.
Do I need to buy an extra bFlash module?
Of course not! This protocol is active now, for all users.
What control units are included in this bFlash update?
You can find the full list of control units below.
MAGICMOTORSPORT has just released new OBD protocols for MD1 and MG1 ECUs used on VAG group cars in FLEX version 3.14.0.0, allowing you to work on these units quickly and easily.
Test Example: Audi Q7 Quattro Etron – ECU MD1CP004, writing time about 2 min.
All “stages” are completed effortlessly and quickly by OBD.
These solutions for MD1 and MG1 VAG control units provided by MMS can also be recalibrated directly via OBD.
The VAG OBD protocol is one of the most anticipated protocols in the industry, with FLEX today it is a reality!
Supported VAG group cars: Audi, VW, Seat, Lamborghini, Porsche, Skoda.
New protocols added:
Audi Bosch MD1CP004 OBD: Write/Checksum Maps (requires TPROT OFF in bench mode before)
Audi Bosch MD1CP014 OBD: Write/Checksum Maps (requires TPROT OFF in bench mode before)
Audi Bosch MG1CS011 OBD: Write/Checksum Maps (requires TPROT OFF in bench mode before)
Audi Continental Simos 8.6 OBD: Read/Write/Checksum Maps (needs Unlock in boot mode before writing MOD)
Audi Continental Simos 8.6 Boot: Read/Write/Unlock External EEPROM
Volkswagen (VW) Bosch MG1CS011 OBD: Write/Checksum Maps (requires TPROT OFF in bench mode before)
Software Improvements:
VAG Bosch MD1 & MG1 Bench: added reversible TPROT OFF function, which allows the user to write the vehicle in OBD any amount of times. If this procedure is not done initially, it will not be possible to write files by OBD.
The newest generation of Bosch ECUs , MD1 & MG1, are now available for FLEX
MAGIC gives you a COMPLETE TUNING SOLUTION!
Mechatronics, the wait is over, MAGICMOTORSPORT has released new solutions for Bosch MD1 & MG1 control units.
These protocols support the latest generation of ECUs present in BMWs as well as many models of Mercedes and VAG and more MD1 & MG1 options from other brands will be soon to follow.
The real news is that the 3.9.0.0 FLEX release allows you to make a full backup of the MD1 and MG1 used in Mercedes and BMW vehicles, resulting in a perfect copy of your new ECU.
What’s more, we have added Bench Tricore support for a few ECUs, OBD support for many VAG TCUs and clone (and tuning) options in Bootloader for Porsche PDK4000 TCUs that that are exclusively a FLEX solution.
Stay tuned!
New protocols added:
Audi Aisin AL450 (ZF 8HP) OBD: Read/Write/Checksum Maps
Audi Aisin AL551 (ZF 8HP) OBD: Read/Write/Checksum Maps
Audi Aisin AL651 (ZF 6HP) OBD: Read/Write/Checksum Maps
Audi Aisin AL951 (ZF 8HP) OBD: Read/Write/Checksum Maps
Audi Aisin AL1000 (3.0 TDI Touareg/Q7/Cayenne TCU) OBD: Read/Write/Checksum Maps