Tag: MB

Posted on by

BitBox 3.2.2 rev 1

New modules:

Mazda SkyAktiv-G Petrol CAN added and ready for tests with following families:

  • Mazda Denso Gen3 SH72543 (read/write/cs calculation)
  • Mazda Denso Gen3 Crypto SH72543 (read/write/cs calculation)
  • Mazda Denso Gen4 Crypto MPC5746 (read/write/cs calculation)
  • Mazda Mitsubishi Gen3 CX9 MH8501 (read/write/cs calculation)
  • Mazda Mitsubishi Gen3 MH8501 (read/write/cs calculation)

 

GM ACDelco Petrol Gen2 CAN

Attention! This module does not support automatic authentication. It requires authentication key for every ECU/vehicle for reading/writing. Now supported:

  • GM ACDelco E92 Gen2 CAN (read/write/cs calculation)
  • GM ACDelco E39A Gen2 CAN (read/write/cs calculation)
  • More ECU types will be added ASAP.

 

New families:

  • Infiniti Delphi CRD3.XX TC1797 CAN (read/write/cs calculation) added to module MB Delphi Diesel CAN
  • China Delphi MT62.1 MPC5634 CAN (read/write) added to module China Delphi Petrol
  • China Delphi MT22.1 IAC MC9S12XEQ512 (read/write/cs calculation) added to module China Delphi Petrol
  • Hino EDC17CV41 TC1797 added to module Trucks/Industrial Bosch EDC17CV41 CAN (virtual read/write/cs calculation)

Improvements and fixes:

  • Added interface for manual entering key value for GM ACDelco Gen2
  • Minor fixes of UI interface

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.2.0 rev 1

New families:

  • MB Delphi CRD2.XX (FID:217) added to MB Delphi Diesel CAN module with reading/writing and checksums calculation
  • BMW Exx Bosch MEVD17.2.6 (FID:138) added to BMW Exx Bosch CAN module with virtual reading/writing and checksums calculation

Improvements and fixes:

  • Fixed master/slave system for recovery files
  • Some renaming and fixes in interfaces
  • Improved system logging

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.9 rev 1

New modules:

  • China Diesel CAN introduced with FID145: China Delphi DCM3.7AP CAN with reading/writing and checksum calculation

New families:

Improvements and fixes:

  • Motorola NGC3 added detection of unsupported old types of ECU during identification
  • Continental GPEC2A 2018+ fixed bug with wrong family selection
  • Fixed authentication for ME17.8.8 bug
  • Identification and virtual reading fix for BMW Marelli MBC1
  • Fixed writing coding in BMW Fxx and BMW Gxx ENET in some cases

Corrections and improvements:

  • Added special power adapter pin configuration and now PCM PowerBox also supported.
  • Cars/Tracks section in car list was split to Cars/LCV and Trucks/Industrial

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.8 rev 1

New modules:

  • MB Delphi Diesel CAN with Delphi CRD3.XX family with reading/writing and checksum calculation.
  • Trucks Delphi ETC3 CAN with 2 families:
    • DAF / Industrial Delphi ETC3 (FID: 220)
    • Hyundai Delphi ETC3 (FID: 221) / TEST /

New families:

  • China Bosch ME17.8.8 SAIC added to China Bosch Petrol module

Improvements and fixes:

  • GPEC2A 2018+ writing algorithm remade, now writing flash and maps and fix P1400 problem. New protection removal patch
  • GPEC3 HW2 finally tested and remove protection now works!
  • Sim2K-25X, Sim2K-260, Sim271 made reading flash and maps data for valid checksums patch
  • Added detection of Gen2 (new protection) for ACDelco modules

Corrections and improvements:

  • Unlicensed identification released. Now you can do module identification even when module is not purchased. In some cases identification will be reduced.
  • Master/Slave system fixes

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.7 rev 1

New families:

  • SsangYong Delphi DCM6.2AP-6D with new MCU added to SsangYong Delphi Diesel with read/write and checksums correction.

Improvements and fixes:

Master / Slave:

  • CVN fix for Toyota made when Master creating file for slave
  • Slave now can write original file without Master, if file was read from vehicle.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.6 rev 1 – MB Siemens/Continental SIM271

New module:

MB Siemens/Continental SIM271 added with 2 new families.

  • Continental SIM271DE2.0 TC1796 with bench reading/writing and checksum calculation
  • Siemens SIM271KE2.0 TC1796 with bench reading/writing and checksum calculation

New families:

Improvements and fixes:

  • PSA Delphi DCM6.2A now made full flash reading
  • Fixed writing start for MB MED17 families

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

I/O Terminal Tool Bosch V12 Update

Bosch ECU TOOL v12 Released:

Fiat Bosch ME7.6.3 K-Line
Read/Write ST10F276 Flash + 95080 Eeprom + Reset to Virgin Mode

Fiat Bosch ME7.9.10 K-Line
Read/Write ST10F275 Flash + 95160 Eeprom + Reset to Virgin Mode

Smart Bosch ME7.7.0 K-Line
Read/Write ST10F275 Flash + 95080 Eeprom

Smart Bosch EDG15C-5.x K-line
Read/Write 29F400BT Flash + 95P08 Eeprom

VAG Bosch ME7.5.20 K-Line
Read/Write ST10F275 Flash + 95040 Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.