Tag: Kia

Posted on by

CMDFlash V3.2.0.194 – TRANSTRON + KEFICO

OBD: 

TRANSTRON TTI0100 SH7058 CAN R/W/CHK/Recovery
ISUZU D-MAX 3.0D
ISUZU V-MAX 3.0D
ISUZU D-MAX 2.5D
ISUZU V-MAX 2.5D
ISUZU Cytybus 5.2D
ISUZU Novo City 5.2D
ISUZU Turquoise 5.2D
( pinout for OBD out of car is available press HELP )

KEFICO CPEGD2.20.3/4 HYUNDAI/KIA CAN R/W/CHK/Recovery
HYUNDAI Elantra 1.6 T-GDI 150Kw
HYUNDAI i20 1.0 T-GDI 74Kw
HYUNDAI i20 1.0 T-GDI 88Kw
HYUNDAI i30 1.0 T-GDI 88Kw
HYUNDAI i30 1.4 T-GDI 103Kw
HYUNDAI i30 1.6 T-GDI 137Kw
HYUNDAI i30 1.6 T-GDI 150Kw
HYUNDAI Kona 1.0 T-GDI 88Kw
HYUNDAI Kona 1.6 T-GDI 130Kw
HYUNDAI Tucson 1.6 GDI 97Kw
HYUNDAI Tucson 1.6 GDI 97Kw
HYUNDAI Veloster 1.6 T-GDI 137Kw
HYUNDAI Veloster 1.6 T-GDI 150Kw
KIA Ceed 1.0 T-GDI 74Kw
KIA Ceed 1.0 T-GDI 88Kw
KIA Ceed 1.0 T-GDI 88Kw
KIA Ceed 1.0 T-GDI 88Kw
KIA Ceed 1.4 T-GDI 103Kw
KIA Ceed 1.6 T-GDI 150Kw
KIA Ceed 1.6 T-GDI 150Kw
KIA Picanto 1.0 T-GDI 74Kw
KIA Rio 1.0 T-GDI 74Kw
KIA Rio 1.0 T-GDI 88Kw
KIA Soul 1.6 GDI 97Kw
KIA Stonic 1.0 T-GDI 88Kw
KIA X-Ceed 1.0 T-GDI 88Kw
KIA X-Ceed 1.4 T-GDI 103Kw
KIA X-Ceed 1.6 T-GDI 150Kw

DIAGNOSTIC: 

Acceleration list can be now showed with different units: Kmh or mph miles

BOOT: 

KEFICO CPEGD2.20.3/4 HYUNDAI/KIA

 

This software version is Windows 10 Ready!
Only HW2 users are allowed to download this new software version.

More info and pricing

 

Posted on by

BitBox 3.2.4 rev 1

New modules:

  • Kia/Hyundai Kefico CPxxxx Petrol CAN module now ready for tests with:
    FID 251: Kia/Hyundai Kefico CPGDSH2.2x.x/CPEGD2.20.x TC1782 2.5MB CAN read/write and checksum calculation
    Supported ECUs: CPEGD2.20.1, CPEGD2.20.2, CPEGD2.20.3, CPEGD2.20.4, CPGDSH2.26.1, CPGDSH2.24.4

New families:

  • China BYD TB10 Type 2 (FID:148) now added to module China Bosch Petrol with virtual reading/writing and checksum calculation

Improvements and fixes:

  • Bosch US6.0/MSE6.0 fixed identification and virtual reading.
  • Continental SIM2K-25x OBD writing fix for some vehicels with gateway
  • Continental SIM2K-25x/26x improved password reading
  • Various UI fixes

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.2.2 rev 1

New modules:

Mazda SkyAktiv-G Petrol CAN added and ready for tests with following families:

  • Mazda Denso Gen3 SH72543 (read/write/cs calculation)
  • Mazda Denso Gen3 Crypto SH72543 (read/write/cs calculation)
  • Mazda Denso Gen4 Crypto MPC5746 (read/write/cs calculation)
  • Mazda Mitsubishi Gen3 CX9 MH8501 (read/write/cs calculation)
  • Mazda Mitsubishi Gen3 MH8501 (read/write/cs calculation)

 

GM ACDelco Petrol Gen2 CAN

Attention! This module does not support automatic authentication. It requires authentication key for every ECU/vehicle for reading/writing. Now supported:

  • GM ACDelco E92 Gen2 CAN (read/write/cs calculation)
  • GM ACDelco E39A Gen2 CAN (read/write/cs calculation)
  • More ECU types will be added ASAP.

 

New families:

  • Infiniti Delphi CRD3.XX TC1797 CAN (read/write/cs calculation) added to module MB Delphi Diesel CAN
  • China Delphi MT62.1 MPC5634 CAN (read/write) added to module China Delphi Petrol
  • China Delphi MT22.1 IAC MC9S12XEQ512 (read/write/cs calculation) added to module China Delphi Petrol
  • Hino EDC17CV41 TC1797 added to module Trucks/Industrial Bosch EDC17CV41 CAN (virtual read/write/cs calculation)

Improvements and fixes:

  • Added interface for manual entering key value for GM ACDelco Gen2
  • Minor fixes of UI interface

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.2.0 rev 1

New families:

  • MB Delphi CRD2.XX (FID:217) added to MB Delphi Diesel CAN module with reading/writing and checksums calculation
  • BMW Exx Bosch MEVD17.2.6 (FID:138) added to BMW Exx Bosch CAN module with virtual reading/writing and checksums calculation

Improvements and fixes:

  • Fixed master/slave system for recovery files
  • Some renaming and fixes in interfaces
  • Improved system logging

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.9 rev 1

New modules:

  • China Diesel CAN introduced with FID145: China Delphi DCM3.7AP CAN with reading/writing and checksum calculation

New families:

Improvements and fixes:

  • Motorola NGC3 added detection of unsupported old types of ECU during identification
  • Continental GPEC2A 2018+ fixed bug with wrong family selection
  • Fixed authentication for ME17.8.8 bug
  • Identification and virtual reading fix for BMW Marelli MBC1
  • Fixed writing coding in BMW Fxx and BMW Gxx ENET in some cases

Corrections and improvements:

  • Added special power adapter pin configuration and now PCM PowerBox also supported.
  • Cars/Tracks section in car list was split to Cars/LCV and Trucks/Industrial

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.8 rev 1

New modules:

  • MB Delphi Diesel CAN with Delphi CRD3.XX family with reading/writing and checksum calculation.
  • Trucks Delphi ETC3 CAN with 2 families:
    • DAF / Industrial Delphi ETC3 (FID: 220)
    • Hyundai Delphi ETC3 (FID: 221) / TEST /

New families:

  • China Bosch ME17.8.8 SAIC added to China Bosch Petrol module

Improvements and fixes:

  • GPEC2A 2018+ writing algorithm remade, now writing flash and maps and fix P1400 problem. New protection removal patch
  • GPEC3 HW2 finally tested and remove protection now works!
  • Sim2K-25X, Sim2K-260, Sim271 made reading flash and maps data for valid checksums patch
  • Added detection of Gen2 (new protection) for ACDelco modules

Corrections and improvements:

  • Unlicensed identification released. Now you can do module identification even when module is not purchased. In some cases identification will be reduced.
  • Master/Slave system fixes

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.7 rev 1

New families:

  • SsangYong Delphi DCM6.2AP-6D with new MCU added to SsangYong Delphi Diesel with read/write and checksums correction.

Improvements and fixes:

Master / Slave:

  • CVN fix for Toyota made when Master creating file for slave
  • Slave now can write original file without Master, if file was read from vehicle.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.6 rev 1 – MB Siemens/Continental SIM271

New module:

MB Siemens/Continental SIM271 added with 2 new families.

  • Continental SIM271DE2.0 TC1796 with bench reading/writing and checksum calculation
  • Siemens SIM271KE2.0 TC1796 with bench reading/writing and checksum calculation

New families:

Improvements and fixes:

  • PSA Delphi DCM6.2A now made full flash reading
  • Fixed writing start for MB MED17 families

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.5 rev 2 – Kia / Hyundai SIM2K-25x / 26x

New module:

Kia/Hyundai Continental Sim2K-25x/26x BSL added in test mode.

FID:150 Continental SIM2K-250/251/253 TC1782 read/write with special adapter BITS001. CS calculation and CVN fix!
Continetnal SIM2K-25x with TC1767 and SIM2K-26x with TC1793 are already in development and will be added as soon as possible!

Improvements and UI fixes:

  • Personal files crypt system now released. Contact to support for details!
  • UI fixes and backup system made for new module

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

CMDFlash V3.2.0.178

OBD:

Bosch MEVD17.2 VR/W/CHK/Recovery
BMW Serie 3 335i E92 225KW Bosch MEVD17.2 CAN
BMW Serie 3 335i E90 225KW Bosch MEVD17.2 CAN
BMW Serie 3 335i E93 225KW Bosch MEVD17.2 CAN
BMW Serie X6 35i E71 225KW Bosch MEVD17.2 CAN

Bosch MG1 VR/W/CHK/Recovery/CVN fix
If file is not present in the Virtual dbase a real read will be performed.
The read file is automatically sent to server.
If recognised and stock server will add it to the dbase and downloaded as usual.
BMW Serie 1 140i F20 250KW MG1 ENET
BMW Serie 1 140i F21 250KW MG1 ENET
BMW Serie 2 240i F22 250KW MG1 ENET 
MW Serie 2 240i F23 250KW MG1 ENET
BMW Serie 5 540i G30 250KW MG1 ENET
BMW Serie 5 540i G31 250KW MG1 ENET
BMW Serie 6 640i G32 250KW MG1 ENET
BMW Serie X5 40i G05 250KW MG1 ENET
BMW Serie 7 740i G11 240KW MG1 ENET
BMW Serie 4 440i F32 240KW MG1 ENET
BMW Serie 3 340i F30 240KW MG1 ENET
BMW Serie 3 340i F31 240KW MG1 ENET
BMW Serie 3 340i F34 240KW MG1 ENET
BMW Serie X3 40i G01 265KW MG1 ENET
BMW Serie X4 40i G02 265KW MG1 ENET
BMW Serie 3 340i F30 265KW MG1 ENET
BMW Serie 3 340i F31 265KW MG1 ENET
BMW Serie 3 340i F34 265KW MG1 ENET
BMW Serie 4 440i F32 265KW MG1 ENET
BMW Serie 4 440i F33 265KW MG1 ENET
BMW Serie 4 440i F36 265KW MG1 ENET
BMW Serie 5 540i G30 265KW MG1 ENET
BMW Serie 5 540i G31 265KW MG1 ENET

SID211 BK21 FORD R/W/CHK/Recovery (unlock no more required)
FORD TRANSIT 2.0 TDCi ECOBLUE 170Hp SID211 CAN
FORD TRANSIT 2.0 TDCi ECOBLUE 130Hp SID211 CAN
FORD TRANSIT 2.0 TDCi ECOBLUE 105Hp SID211 CAN

 

BOOT TRICORE:

HYUNDAI/KIA SIEMENS CONTINENTAL SIM2K-250 PWD READER
HYUNDAI/KIA SIEMENS CONTINENTAL SIM2K-250 R/W/CHK
VAG BOSCH ME17.5.26 TC1724 R/W/CHK
VAG BOSCH ME17.5.26 TC1724 PWD READ (BMW Fxx PWD Needed)
ISUZU BOSCH EDC17C83 TC1793 R/W/CHK
ISUZU BOSCH EDC17C83 TC1793 PWD READ (BMW Fxx PWD Needed)

 

BOOT MPC55XX:

PSA DCM3.5 MPC5566 R/W/CHK

 

MAP3D2007 03-08-2017 V5.0.3.1793:

New file recognitions
Bugfix

 

This software version is Windows 10 Ready!
Only HW2 users are allowed to download this new software version.

More info and pricing