Tag: Ford

Posted on by

DFOX: Exclusive MD1CE101 OBD Protocols!

 

Exclusive: New OBD driver for FPT INDUSTRIAL SOUNDPROOF GENSET with BOSCH MD1CE101

Virtual reading, writing
Recovery and checksum available

Exclusive: New OBD driver for STEYR tractors with BOSCH MD1CE101

Virtual reading, writing
Recovery and checksum available
CVN alignment

Exclusive: New OBD driver for CASE tractors with BOSCH MD1CE101

Virtual reading, writing
Recovery and checksum available
CVN alignment

Exclusive: New OBD driver for NEW HOLLAND tractors with BOSCH MD1CE101

Virtual reading, writing
Recovery and checksum available
CVN alignment

 

DFOX Info >>
DFOX Updates >>

Posted on by

BitBox 3.3.9 + New BitEdit modules

New BitEdit modules:

New BitBox families:

Fixes and improvements:

  • Fixed identification without license for Toyota Delphi Gen1 CAN
  • Added support for some ECU variations on Ford SID807Evo
  • Added real full flash reading from ECU for Bosch MSE6.0/US6.0 when file was not found on server.
  • Some renaming and minor fixes

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

DFOX Updates: Ford Conti M799G +Kubota Denso!

 

NEW OBD DRIVER FORD ECU CONTINENTAL M799G

Reading and writing
Recovery and checksum available

 

 

 

BENCH MODE FOR ECU DENSO KUBOTA 1Jxxx-5905x:

Complete reading and writing Micro RENESAS SH72543 + EEPROM
Recovery and checksum available

 

NEW DRIVER FULL SYSTEM VIA PINOUT FOR FOR BOSCH EDC15 C13 RENAULT

Full reading and writing MICRO + EEPROM
Recovery and checksum available

 

– ADDED BOOT MODE FORD ECU CONTINENTAL M799G

Reading and writing
Recovery and checksum available

 

DFOX Info >>
DFOX Updates >>

Posted on by

BitBox 3.3.8 includes Isuzu Transtron Flasher!

New module:

  • Isuzu Transtron with support for control units based on Renesas SH7058 / SH7059 / SH72533 / SH72544 processors. The module allows reading, writing and checking and checksums calculation.

New families:

  • [EXCLUSIVE] Ford Continental EMS2701 TC1791 added to module Ford Continental Petrol CAN with virtual reading/writing and checksums calculation.

Fixes and improvements:

  • [EXCLUSIVE] Bosch MG1CA094 with SPC572 added to module Bosch MD1/MG1 Bench with reading/writing/recovery/checksums calculation and EEPROM reading.
  • Some stability fixes for SIM2K-260 on SM2 devices.
  • Added support for Mazda Mitsubishi Gen4 M41 ECUs.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox / BitEdit Updates!

New module:

Ford Continental Petrol CAN includes virtual reading/writing/checksums calculation and VBF to BIN decryption, released with following families:

  • Ford Continental EMS2204 TC1738 2MB CAN
  • Ford Continental EMS2205 TC1766 1.46MB CAN
  • Ford Continental EMS2208 TC1767 2MB CAN
  • Ford Continental EMS2211 TC1738 2MB CAN
  • Ford Continental EMS2214/EMS2215 TC1738 2MB CAN
  • Ford Continental EMS24xx TC1791 4MB CAN
  • Ford Continental EMS2510/EMS2511 TC1791 4MB CAN

All families supports writing with update and you can decrypt VBF file to BIN by using special button in BitBox application. For each family VBF will be decrypted and checked for compatibility with selected family!

Fixes and improvements:

  • Bosch MG1/MD1 BENCH added support for some new ECU types:- MD1CE100 (MAN, KAMAZ)
    – MD1CP006 (Ford)
    – MD1CS012 (Kia/Hyundai)
    – and other ECU types which required other TSW.ECU’s after 06/2020 are still not supported cause of new authentication system. For now we found newest BMW, Kia/Hyundai and BRP Rotax with this issue.
  • Fixed and extended identification for GM AC Delco families.
  • Fixed security bug with VBF to BIN available buttons when license is not purchased.
  • Fixed crash when slave subscription expired. Added dongle ID to error message.
  • Extended info for some errors added.

BitEdit new modules:

Bosch ECU catalogue update:

  • We are glad to inform that we updated Bosch ECU catalogue and add 6000+ new records. Now we have 51000+ Bosch numbers in a base and you can easily determine ECU type in you user portal area. Most of new MD1 and MG1 now can be recognized.

View Full Range of modules here:

BitBox Module List 
BitEdit Module List
Posted on by

DFOX: Ford 6R140 / Powertec 6F24 / CCM TCUs

DFOX: NEW TCU Protocols Added:

 

– New boot for TCU 6R140 for vehicle FORD
– Full reading and writing Micro
– Full reading and writing EEPROM
– Checksum and Recovery available

 

 

– New boot for TCU CCM MR for vehicle New Holland, Case, Steyr
– Full reading and writing Micro
– Checksum and Recovery available

 

 

– New driver for gearbox 6F24 – TCU HYUNDAI POWERTEC P05150 for vehicle DODGE, JEEP
– Full reading and writing Micro
– Full reading and writing EEPROM
– Checksum and Recovery available

 

 

– Checksums added on the following TCUs:
– CONTINENTAL TEMIC DL382 VAG
– TEMIC DL501 VAG GEN1
– TEMIC DL501 VAG GEN2
– TEMIC DQ200 VAG GEN1
– TEMIC DQ200 VAG GEN2
– TEMIC DQ250 E/F/MQB VAG
– TEMIC VL381 VAG

 

DFOX Info >>
DFOX Updates >>
Posted on by

BitBox 3.3.6 rev 1

New module:

  • BOSCH MG1/MD1 BENCH is now ready for sales and has been already tested. We remind that module works only with Scanmatik2/Scanmatik2 Pro devices and requires the latest driver version 2.21.11. List of tested ECU types you can check on our website! All other ECUs were not tested and will be supported ASAP. FID 282: Bosch MG1/MD1 SPC/AURIX BENCH with reading/writing and checksums calculation.
  • VAG Continental Simos12.1 now ready for tests, please contact BitBox support if you would like to beta test

Fixes and improvements:

  • Bosch INVCON3.3 support added to Bosch MG1/MD1 Bench
  • Delphi MT05 read/clear DTC has been returned
  • Kia/Hyundai SIM2K-25X/26X now works with Scanmatik2/Scanmatik2Pro. We recommend to use them.
  • PSA Continental SID208 now works with Scanmatik2/Scanmatik2Pro, other devices are also supported but not properly tested.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.3.4 rev 1

New module:

Ford Continental Diesel CAN introduced with following families:

  • FID255: Ford Continental SID208 TC1797 CAN (FULL OBD) – RD/WR/CS
  • FID256: Ford Continental SID211 TC1791S CAN (FULL OBD) – RD/WR/CS
  • FID259: Ford Continental SID206 MPC563+Ext.Flash – RD/WR/CS
  • FID261: Ford Continental SID803A MPC561+Ext.Flash – RD/WR/CS
Order Module

Fixes and improvements:

  • Fixed some errors for Kia/Hyundai SIM2K-260 for reading/writing when password is already known
  • Fixed timeout error with erasing memory on MB Delphi CRD2.XX
  • Fixes for some ECU types for China Delphi DCM3.7AP during writing on vehicle

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

Flex version 5.3.0.0

NEW Bench and Boot solutions 

Continental SID603 and Magneti Marelli automatic transmissions

New solutions for programming in Bootloader and Bench modes of Continental, Bosch, Denso and Magneti Marelli engine control units and automatic transmissions. MAGICMOTORSPORT releases FLEX version 5.3.0.0 for the in-boot work of Continental SID603 ECUs installed on Ford Troller cars (SID603 12V) and for programming of Magneti Marelli 8TDW and 8TDF Alfa Romeo automatic transmissions.

We also have new solutions for the bench machining of Bosch ME17.9.55, EDC17CP05, ME17.0.3 engine control units equipped with Honda and Ford cars.

New protocols added:

  • FORD Continental SID603 12V Boot: Read / Write / Checksum Maps; Read / Write IntEeprom + ExtEprom; Full Backup
  • HONDA BOSCH ME17.9.55 Bench: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
  • HONDA BOSCH ME17.9.55 Boot: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
  • FORD BOSCH EDC17CP05 Bench: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
  • FORD BOSCH EDC17CP05 Boot: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
  • ISUZU DENSO 275700-7082 Bench: Read / Write Maps; Read / Write IntEprom; Full Backup
  • TOYOTA – BOSCH – EDC16C10 Obd: Read / Write / Checksum Maps; Recovery
  • Alfa Romeo Marelli 8TDW Boot: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
  • Alfa Romeo Marelli 8TDF Boot: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
  • FORD – BOSCH – ME17.0.3 Bench: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
  • FORD – BOSCH – ME17.0.3 Boot: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
  • VOLVO – BOSCH – EDC15C11 Boot: Read / Write External Flash; Read / Write ExtEprom; Full Backup

Software Improvements:

  • Added New CRC for EDC17C53
  • Added New CRC GPEC2A Dodge
  • Added New for PORSCHE BOSCH MG1CP007
  • Added VAG TEMIC DQ200G2.1 Bench support (Golf 8 2020)
More info and pricing