Tag: dodge

Posted on by

DFOX: Ford 6R140 / Powertec 6F24 / CCM TCUs

DFOX: NEW TCU Protocols Added:

 

– New boot for TCU 6R140 for vehicle FORD
– Full reading and writing Micro
– Full reading and writing EEPROM
– Checksum and Recovery available

 

 

– New boot for TCU CCM MR for vehicle New Holland, Case, Steyr
– Full reading and writing Micro
– Checksum and Recovery available

 

 

– New driver for gearbox 6F24 – TCU HYUNDAI POWERTEC P05150 for vehicle DODGE, JEEP
– Full reading and writing Micro
– Full reading and writing EEPROM
– Checksum and Recovery available

 

 

– Checksums added on the following TCUs:
– CONTINENTAL TEMIC DL382 VAG
– TEMIC DL501 VAG GEN1
– TEMIC DL501 VAG GEN2
– TEMIC DQ200 VAG GEN1
– TEMIC DQ200 VAG GEN2
– TEMIC DQ250 E/F/MQB VAG
– TEMIC VL381 VAG

 

DFOX Info >>
DFOX Updates >>
Posted on by

BitEdit Honda Keihin Module Released

Module for editing and tuning of Honda Keihin ECUs with SH7058, SH72543, MPC5566 MCUs.

BitEdit Honda Keihin Screenshot 1

The following maps are available for editing:

  • Camshaft angle control (VTC)
  • Closed loop lambda
  • Injector opening time
  • WOT determining mode
  • Fuel compensations for temperature
  • Target lambda at High VTEC and Low VTEC
  • Idle speed control
  • Knock limits
  • Knock sensitivity
  • Knock retardation
  • Spark advance at High VTEC and Low VTEC
  • Throttle valve control
  • VTEC control
  • REV limiter

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Posted on by

New BitSoftware modules released!

The BitSoftware team have been hard at work developing some new modules!

A new module has been released for BitEdit:

Module for editing and tuning of Bosch ME17.8.5 ECUs.

BitEdit ME17.8.5 Screenshot 3

The following maps are available for editing:

  • Airmass flow calculation over throttle valve
  • Idle speed control
  • Enrichment and enleanment at acceleration and deacceleration
  • Injection timing control
  • Mixture control
  • Target lambda for knock protection
  • Spark advance optimal and base, advance correction
  • Ignition efficiency
  • Lambda efficiency
  • Optimal torque

Click here for screenshots and more info!

View Full Range of modules here.

BitEdit_logo

 

Also two new modules have been added to the BitBox flasher.

BitBox Rotax Extreme Flasher Module.

rotax

Siemens MSE 3.7x.

Allows identification, reading of full flash and writing of the calibrations areas by K-Line. It also supports automatic correction of checksums while writing.

Siemens MSE 3.7 with MCU ST10F269 and internal Flash memory 256Kb.

Siemens MSE 3.71 with MCU ST10F269 and internal Flash memory 256Kb.

Bosch ME17.8.5.

Allows identification, virtual reading of full flash (from internet server) and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

ECU is based on MCU Infineon Tricore TC1762 with internal Flash memory 1504Kb.

Click here for more info!

BitBox Chrysler / Dodge / Jeep Petrol Flasher Module.

ngc4-gpec2

Allows identification, reading of full flash and writing of the calibrations areas by CAN bus. It also supports automatic correction of checksums while writing.

  • Motorola NGC3 MPC565 1Mb
  • Motorola NGC4 MPC5554 2Mb
  • Motorola NGC4A MPC5566 3Mb
  • Continental GPEC (SIM90) MPC561+EXT.FLASH 2Mb – beta version
  • Continental GPEC2 MPC5566 3Mb – beta version
  • Continental GPEC2A MPC5566 3Mb – in development, not yet released!

 
Click here for more info!

View Full Range of modules here.

bitbox_logo