Posted on

DFOX: GPEC2/3/4/ | CM2200 | DCM7.1A/B!

 

NEW BOOT MODE (BAM) for CONTINENTAL GPEC ECUs used on FCA Fiat, JEEP, Chrysler, Dodge

CONTINENTAL GPEC2A, GPEC3, GPEC4, GPEC4LM

Complete reading and writing Micro
Complete reading and writing Eeprom
Recovery and checksum available


 

NEW JTAG solution for CONTINENTAL CUMMINS CM2200 ECU fitted to DODGE and CHRYSLER vehicles

Reading and writing
Recovery and checksum available


 

NEW BOOT MODE FOR DELPHI ECU DCM7.1A / DCM7.1B

We have implemented new BOOT MODE for micro AURIX TC297 mounted on DCM7.1A and DCM7.1B control units of the PSA group.

Reading and writing
Recovery and checksum available


 

FULL SYSTEM FOR CONTINENTAL ACM / MCM MERCEDES TRUCK AND CLAAS

Until now, the K-line MCM2 D1 / D2 and ACM versions were supported.
The complete reading of the MCM2.1 D3 / D4 and ACM2.1 control units is now also available via communication in CAN.

Reading and writing Micro
Reading and writing Eeprom
Recovery and checksum available

To enable full system communication in hardware versions D4 it will be necessary carry out simple release operations with the control unit open by making bridges on the board.
At the end you can close the control unit and read and write all the contents from pinout. Follow the instructions in the operating manuals.


 

 

BENCH MODE FOR PSA HYBRID4 HV17.4 CONTROL UNITS

Added the complete reading of Citroen / Peugeot HYBRID4 control units via pinout.
The control unit has two internal HCUs.

Complete reading and writing Micro HCU1 / HCU2
Complete reading and writing Eeprom HCU1 / HCU2
Recovery and checksum available


 

Added to the OBD driver for MARELLI 9DF FCA also the function for VIRTUAL reading, in addition to the actual reading already present.


 

New BOOT MODE via PINOUT for MITSUBISHI OUTLANDER 2.0 PETROL

Reading and writing
Recovery and checksum available


 

Added JTAG mode for ADBLUE ACM VOLVO EURO 6 control unit

Reading and writing
Recovery and checksum available


NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automated function to clone the following control units with OTP zones and password adaptation:

MED17.5 AUDI
MED17.5.25 AUDI
MEVD17.4.2 CITROEN
EDC17 C08 HYUNDAI
EDC17 C53 HYUNDAI
EDC17 C08 KIA
EDC17 C53 KIA
EDC17 C66 MERCEDES BENZ
MEVD17.4.2 PEUGEOT
MED17.5 SEAT
MED17.5.25 SEAT
MED17.5 SKODA
MED17.5.25 SKODA
ME17.9.20 SMART
EDC17 C73 TOYOTA
MED17.5 VOLKSWAGEN
MED17.5.25 VOLKSWAGEN

 

Posted on

DFOX New Updates!

 

EXCLUSIVE ! – FULL SYSTEM for MARELLI 9GF and 8GSW sw version from 2020

On these control units with updated software was no longer allowed the complete reading of micro and eeprom from pinout. It’s now possible: read and write the complete content without opening the control unit.

Reading and writing Micro
Reading and writing Eeprom
Recovery and checksum available


 

BENCH MODE FOR MD1CE100 Trucks: MAN, KAMAZ, SHAANXI, SINOTRUK

Complete reading and writing Micro
Complete reading and writing Eeprom
Recovery and checksum available


 

JTAG SOLUTION FOR ECU CUMMINS CM2350 AND CM2350B

Complete reading and writing
Recovery and checksum available

 

Added Bench Mode for KUBOTA ECU Denso 1Jxxx-5905x second type.

Complete reading and writing Micro
Complete reading and writing Eeprom
Recovery and checksum available

 

Added automatic checksum calculation on drivers for ECUs VOLVO TRUCK and RENAULT TRUCK TRW EMS 2.3.

BENCH MODE VIA PINOUT
JTAG MODE


 

Added Bench Mode for KUBOTA ECU Denso 1Jxxx-5905x second type.

Complete reading and writing Micro
Complete reading and writing Eeprom
CLONING function
Recovery and checksum available


NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automated function to clone the following control units with OTP zones and password adaptation:

CITROEN / PEUGEOT SIEMENS SID807
FORD SIEMENS SID208
FORD SIEMENS SID807

 

Posted on

DFOX: BMW F-Series + More Cloning Solutions

 

New OBD driver for BMW / Mini F Series cars

New solutions via OBD for BMW and MINI cars with EDC17 and MEVD17 control units.
We have added new drivers in DFOX to be used via the OBD socket in order to work on the BMW / Mini F Series without having to remove the ECU from the car.
Automatic coding and error cancellation function.
Through DFB write + patch the programming counter does NOT increase!
The BACK TO STOCK function has also been added to restore the control unit to its original factory state.

Virtual reading and writing
Recovery and checksum available
Back to stock function

  • EDC17C41
  • EDC17C50
  • EDC17C56
  • EDC17C76
  • EDC17CP09
  • EDC17CP45
  • EDC17CP49
  • MEVD17.2
  • MEVD17.2.3
  • MEVD17.2.4
  • MEVD17.2.5
  • MEVD17.2.6
  • MEVD17.2.8
  • MEVD17.2.9
  • MEVD17.2.G
  • MEVD17.2.x

NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automated function to clone the following control units with OTP zones and password adaptation:

BMW EDC17CP02
HYUNDAI / KIA ME17.9.11
HYUNDAI / KIA EDC17C57
HYUNDAI / KIA BOSCH KME1.9.3
LAND ROVER EDC17CP42
RENAULT EDC17C11
VAG MED17.5.5
VAG EDC17U01

 

Posted on

DFOX: New Exclusive MD1CS069 OBD Protocol!

New OBD Driver for tractors with ECU BOSCH MD1CS069:

  • CASE
  • LANDINI
  • McCORMICK
  • NEW HOLLAND
  • STEYR

Reading and writing
Recovery and checksum available
CVN alignment


REAL reading has been added to the OBD driver for MD1CE101:

  • CASE
  • CLAAS
  • IVECO FPT
  • McCORMICK
  • NEW HOLLAND
  • STEYR

(Virtual reading is already available since the DFOX release of May 2021).

 

Posted on

DFOX: New Industrial Protocols + Denso + PDK

New OBD driver for tractors Massey Ferguson with ECU EDC17C49

Reading and writing
Recovery and checksum available

New OBD driver for vehicles AFT Zenith 2 per ECU EDC7

Reading and writing
Recovery and checksum available

New OBD driver for vehicles MAN TGE with ECU Delphi DCM6

Virtual reading and writing
Recovery and checksum available


New OBD driver for tractors McCormick with ECU MD1CE101

Virtual reading and writing
Recovery and checksum available

 


BENCH MODE FOR ECU DENSO 39199-4ADN0 MB275700-xxxx HYUNDAI – KIA

Reading and writing Micro RENESAS SH72546
Reading and writing Eeprom
Recovery and checksum available


New BOOT mode for TCU PDK3000 and PDK4000 PORSCHE

Reading and writing Micro
Reading and writing Eeprom
Recovery and checksum available

 

Posted on

DFOX: Harley Davidson J1850 OBD + More!

 

New OBD driver for HARLEY DAVIDSON with protocol J1850, (The Delphi ECU CAN protocol version is already supported)

Reading and writing
Recovery and checksum available


Added new TRICORE BENCH MODE via pinout for INFINITI CRD3.xx

Reading and writing Micro/Flash
Reading and writing Eeprom
Recovery and checksum available


Added new BOOT MODE:

CHEVROLET / DAWEOO SIEMENS D32
KIA / HYUNDAI SIM2K-245 TC1767 ( + Tool Password )
JCB DCU17CV51 TC1724

Reading and writing Micro/Flash
Reading and writing Eeprom
Recovery and checksum available


Added JTAG / BOOT MODE:

SUZUKI DENSO 33921-65J0 RENESAS

Reading and writing Micro
Recovery and checksum available


NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automated function to clone the following control units with OTP zones and password adaptation:

LAND ROVER EDC17CP11
PORSCHE MED17.1.11
TOYOTA EDC17CP07
TOYOTA EDC17CP37
VAG MED17.1.11

 

Posted on

DFOX: VOLVO RENAULT TRW EMS2.2 EMS2.3

NEW FULL SYSTEM and BENCH MODE for TRW VOLVO/RENAULT TRUCKS EURO5 EURO6

TRW EMS2.2

Reading and writing micro MPC5554
Reading and writing EEPROM
Recovery and checksum available

TRW EMS2.3

Reading and writing micro MPC5674F
Reading and writing EEPROM INT
Reading and writing EEPROM 25LC1024
Recovery and checksum available

 

 

Posted on

DFOX: MB Delphi CRD3 + Mazda Denso SH3F

NEW BENCH MODE FOR ECUs DELPHI CRD3 MERCEDES WITH MICRO TC1793 / TC1797

DELPHI CRD3.1x
DELPHI CRD3.2x
DELPHI CRD3.3x
DELPHI CRD3.4x
DELPHI CRD3.5x
DELPHI CRD3.6x
DELPHI CRD3.7x
DELPHI CRD3PLUS.A0
DELPHI CRD3.E
DELPHI CRD3.E1
DELPHI CRD3.F1
DELPHI CRD3P.B0
DELPHI CRD3P.C0
DELPHI CRD3P.D1

Reading and writing micro TC1793 / TC1797
Reading and writing EEPROM INT + EXT 25LC256
Recovery and checksum available


New OBD driver for Mazda CX5 with ECU DENSO SH3F

Reading and writing
Recovery and checksum available


New OBD drivers for diggers and tractors LINDNER and KRAMER.

LINDNER LINTRAC ECU BOSCH EDC17C49

KRAMER KT407 ECU BOSCH EDC17CV52 

Reading and writing
Recovery and checksum available


NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automated function to clone the following control units with OTP zones and password adaptation:

NISSAN BOSCH ME17.9.5
VAG BOSCH EDC17CP74
VOLVO BOSCH EDC17CP22

 

Posted on

DFOX New TCUs: EASYTRONIC2 SELECTRONIC CFC300x SIM2K

Boot mode per TCU Opel EASYTRONIC2

Boot mode per TCU FCA SELECTRONIC

Boot mode per TCU Peugeot, Citroen CMP-6 CFC300P, CFC300F

Complete reading and writing
Cloning
Checksum and recovery available


 

Added micro TCU for control units for HYUNDAI KIA:
SIEMENS SIM2K-143
SIM2K-240
SIM2K-240R
SIM2K-241
SIM2K-341

Reading and writing
Cloning
Checksum and recovery available