Posted on

I/O Terminal Tool Denso V20 Released

Denso ECU TOOL v20 Released:

Subaru Forester 2.0D KH  2007 – Full Read/Write 64F7058 and 93C86 eeprom (CAN)

Nissan Navara D40 2.5DCI from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)

Nissan Pathfinder D40 2.5DCI from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)

Mitsubishi Delica D5 2.2DID 4N14 from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)

Mitsubishi Outlander 2.2DID 4N14 from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on

I/O Terminal Tool Siemens V50 + Denso V19 Update

Siemens ECU TOOL v50 Released:

VAG Siemens SIMOS 3PE – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PD – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PG – Read/Write Flash + Eeprom

KIA/HYUNDAI Siemens/Continental SIMK41 – Read/Write Flash + Emulated Eeprom

KIA/HYUNDAI Siemens/Continental SIM2K-48 – Read/Write Flash + Emulated Eeprom

 

Denso ECU TOOL v19 Released:

Correction made on Suzuki Swift 1.3 with 64F7055 processor

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on

I/O Terminal Tool Siemens ECU Tool V49 Released

Siemens ECU TOOL v49 Released:

VAG Siemens SIMOS 3PA – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PB – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PC – Read/Write Flash + Eeprom

VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on

I/O Terminal Tool Siemens ECU Tool V48 Released

Siemens ECU TOOL v48 Released:

OPEL BOSCH ME155/ME76H4  Kline- Read/Write Flash + Eeprom, Change VIN/Mileage

OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage

Change VIN/Mileage function added to OPEL ME761/ME762

Some changes made in Opel/SAAB Trionic 8 ECUs software

Free for all owners of Siemens License.

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on

I/O Terminal Tool Denso V16 / Siemens ECU Tool V47 Released

DENSO ECU TOOL v16 Released:

Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC  DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56  eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Free for all owners of Denso License.

 

Siemens ECU TOOL v47 Released:

OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom

OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Free for all owners of Siemens License.

For more info and a list of supported ECU’s, please visit the product page here.

Posted on

Introducing I/O Terminal Tool

We are proud to announce the I/O Terminal Tool is now available at Chiptuningshop!

The I/O Terminal tool can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

It also supports some very tricky controllers which are not covered by other tools.

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

All operations are done over K-line or CAN bus without need to open ECU!

It currently supports BoschEasytronic, Denso, Marelli, and Siemens ECU’s. For more info click the desired plugin below:

Bosch Plugin
Denso Plugin
Siemens Plugin
Marelli Plugin
Easytronic Plugin

Posted on

Denso Plugin for I/O Terminal Tool

The ultimate tool for Denso ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a JTAG programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify odometer mileage stored in eeprom memory.

It works with Denso ECU’s for Mazda, Mitsubishi, Nissan, Opel, Suzuki, Vauxhall and Volvo.

Also included is a checksum correction facility for flash memories.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

 

Supported ECU’s:

Jaguar/ Jaguar XF 4.2SC DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Landrover / Range Rover AJ33 4.2 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Landrover P3.0NA DENSO 64F7058 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Opel Meriva, Corsa C 1.7 CDTI Hybrid ECU – Full R/W 64F7055, R/W 93C66 eeprom, show pin code , reset(virgin). (CAN & K-LINE)

Opel Vectra C/Signum 3.0 CDTI – Full R/W 64F7058, R/W 93C86 x2 eeprom , show pin code , odometer calibration, reset(virgin). (CAN)

Opel 1.7CDTI 110CV/125CV Z17DTJ/Z17DTR/Z17DTH/A17DTH/A17DTR Astra H, Astra J, Zafira B, Corsa D, Meriva B, Tigra B – Full R/W 64F7058, R/W 93C86 x3 eeprom , odometer calibration, show pincode , reset(virgin). Full R/W 64F7059, R/W 93C86 x4 eeprom , odometer calibration, show pin code , reset(virgin). (CAN)

Mazda 3,5,6 RF7/RF8 ECU -Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Mazda 2 1.5 from year 2010 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)

Mazda RX8 Denso – Full R/W 64F7055, R/W 93C56 eeprom. (CAN)

Nissan Navara, Xtrail, Pathfinder 2.5DCI 2005-2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Nissan Navara/Pathfinder D40 2.5DCI from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)

Nissan Xtrail, Almera Tinos 2.2DCI 136v – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)

Mitsubishi Delica D5/Outlander 2.2DID 4N14 from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)

Mitsubishi L200, Pajero 4D56/4M41 2.5DID 136CV <2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Mitsubishi L200, Pajero 4D56/4M41 2.5/3.2 DID 2009> – Full R/W 64F7059, R/W 93C86 eeprom. (CAN)

Subaru Forester 2.0D KH 2007 – Full R/W 64F7058, R/W 93C86 eeprom (CAN)

Suzuki 1.3 <2007 – Full R/W 64F7055 R/W 93C56 eeprom. (CAN)

Suzuki 1.3, 1.5, 1.6 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)

Suzuki Jimny <2007 1.3 – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)

Volvo V50, S40, V40 2006-2010 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)

Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)

Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7055, full R/W external flash 29LV200BC , R/W 93C56 eeprom. (CAN)

Volvo XC90 3.2L YC 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)

Posted on

I/O Terminal Tool OBD Cable

We can offer a replacement OBD2 cable to be used with I/O Terminal tool interface.

This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the unique RS232 connection. CAN bus, K-Line and L-Line are wired.

* Please note – This cable does not work with any other tools, it is specifically made for the I/O Terminal tool.*