This OBD2 cable is to be used with I/O Terminal tool interface when working with the PSA BSI Plugin.
This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the unique RS232 connection. It features alternative CAN Bus and K-line allocation which are required for PSA BSI units.
* Please note – This cable does not work with any other tools, it is specifically made for the I/O Terminal tool. *
This adapter cable allows you to connect to the CAN bus communication wires directly at the ECU, whilst utilising the OBD port for all other connections.
This bypasses the CAN gateway as required when using the AN055 function on MED17 and EDC17 controllers.
It is equipped with an OBD female port to attach to your AVDI tool, an OBD male port to connect to the vehicle and a 3 metre cable with CAN connections via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.
The adapter is made using high quality OBD2 moulded connectors. The K-Line is also wired, allowing use on other applications.
We can offer a replacement OBD2 cable to be used with I/O Terminal tool interface.
This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the unique RS232 connection. CAN bus, K-Line and L-Line are wired.
* Please note – This cable does not work with any other tools, it is specifically made for the I/O Terminal tool.*
This adapter cable allows you to flash Porsche M5.2.2 over OBD.
The adapter has high quality OBD2 moulded connectors, it will supply the ECU the necessary voltage at the VPP pin required for reflashing.
This adapter cable allows you to connect the K-Line and CAN directly at the ECU, whilst utilising the OBD port for all other connections.
It is equipped with an OBD female port to attach to your flash tool, an OBD male port to connect to the vehicle and a 3 metre cable with K-line/CAN connection via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.
The adapter is made using high quality OBD2 moulded connectors.
Some applications where this cable can be useful:
Volvo EDC16C31 – K-Line is not wired to the OBD port but required for flashing by most tools.
VW Crafter EDC16CP34 – K-Line is not wired to the OBD port but required for flashing by some tools.
This adapter cable allows you to flash Porsche M5.2.2 over OBD with MPPS by AMT-Cartech.
The adapter has high quality OBD2 moulded connectors, it will supply the ECU the necessary voltage at the VPP pin required for reflashing.
This kit allows you to connect your MPPS easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your MPPS to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to MPPS, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
This kit allows you to connect your ByteShooter easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your ByteShooter to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to ByteShooter, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
We can offer a replacement cable to be used with MPPS tools.
This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the MPPS RS232 connection, compatible with first generation of MPPS tools.
We can offer a replacement cable to be used with CMDFlash tools.
This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the CMD RS232 connection.
