Tag: bootmode

Posted on by

Improved Design! Universal ECU Pinout Cable

This universal pin out cable allows you to connect easily and comfortably to most types control units.

A variety of pins and extra connections are now used, so you can connect to a many different types of ECU’s.

The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.

It features:

  • Female OBD2 port
  • Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
  • LED indicator to confirm when ECU is ON.
  • 6 x 12V connectors for ECU
  • 6 x GND connectors for ECU
  • 3 x switched ignition connectors for ECU
  • Switched ECU Power (ON/OFF)
  • Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
  • Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
  • 2 x CAN Low
  • 2 x CAN High
  • 2 x K-Line
  • 2 x L-Line
  • Kline with diode N4148 for reset function
  • Bootpins: 560Ω / 1KΩ / 4.7KΩ
Buy Now

 

Posted on by

AVDI VAG MED17.5.2 Probe

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the AVDI OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Buy Now

User Manual

Posted on by

FG Tech VAG MED17.5.2 Probe

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the FG Tech OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Buy Now

User Manual

Posted on by

ByteShooter VAG MED17.5.2 Probe

 

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the ByteShooter OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Buy Now

User Manual

Posted on by

MPPS VAG MED17.5.2 Probe

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the MPPS OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Buy Now

User Manual

Posted on by

MPPS VAG EDC17C46 Probe

This BDM Style probe allows reading/writing of the VAG EDC17C46 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the MPPS OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Buy Now

User Manual

Posted on by

ByteShooter VAG EDC17C46 Probe

 

This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the ByteShooter OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Buy Now

User Manual

Posted on by

FG Tech VAG EDC17C46 Probe

This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the FG Tech OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Buy Now

User Manual

Posted on by

MPPS VAG EDC17/MED17 Boot Kit – No Soldering!

This kit allows you to connect your MPPS easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.

The kit includes:

  • VAG EDC17/MED17 cable with boot pin (integrated 1kΩ resistor)
  • Universal MEDC17 tricore boot pin kit consisting of an ECU mounting plate and 2 x arms equipped with spring loaded boot pins. The arms are secured with high performance magnets ensuring no movement once aligned.

This kit provides a clean connection to ECU boot pads without soldering!

Simply connect your MPPS to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!

 It is designed to work with controllers using TC1766 and TC1796 processor, this includes:

  • EDC17CP04
  • EDC17CP14
  • EDC17CP20
  • EDC17CP24
  • EDC17U01
  • EDC17U05
  • MED17.1
  • MED17.1.1
  • MED17.5
  • MED17.5.1
  • MED17.5.5
  • MED17.5.20

This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)

* Please note: This cable has a special pinout which is unique to MPPS, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *

Buy Now

User Manual
Posted on by

ByteShooter VAG EDC17/MED17 Boot Kit – No Soldering!

This kit allows you to connect your ByteShooter easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.

The kit includes:

  • VAG EDC17/MED17 cable with boot pin (integrated 1kΩ resistor)
  • Universal MEDC17 tricore boot pin kit consisting of an ECU mounting plate and 2 x arms equipped with spring loaded boot pins. The arms are secured with high performance magnets ensuring no movement once aligned.

This kit provides a clean connection to ECU boot pads without soldering!

Simply connect your ByteShooter to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!

 It is designed to work with controllers using TC1766 and TC1796 processor, this includes:

  • EDC17CP04
  • EDC17CP14
  • EDC17CP20
  • EDC17CP24
  • EDC17U01
  • EDC17U05
  • MED17.1
  • MED17.1.1
  • MED17.5
  • MED17.5.1
  • MED17.5.5
  • MED17.5.20

This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)

* Please note: This cable has a special pinout which is unique to ByteShooter, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *

Buy Now