This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a cable to connect the ecu directly to the MPPS OBD port. An external power source is required to power the ECU.
This kit includes the Simos 8x probe and ECU cable.
This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a cable to connect the ECU directly to the MPPS OBD port.
This cable can also be used for most VAG MEDC17 ECU’s and is complete with 1K ohm boot wire!
This kit includes the Simos PCR probe and ECU cable. An external power source is required to power the ECU.
This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering. No additional resistors or boot pins are required!
It is supplied with a special cable to connect the ecu directly to the BS OBD Cable. An external power source is required to power the ECU. This kit includes the Simos 8x probe and ECU cable.
This adapter cable allows you to flash Porsche M5.2.2 over OBD.
The adapter has high quality OBD2 moulded connectors, it will supply the ECU the necessary voltage at the VPP pin required for reflashing.
This adapter cable allows you to flash Porsche M5.2.2 over OBD with MPPS by AMT-Cartech.
The adapter has high quality OBD2 moulded connectors, it will supply the ECU the necessary voltage at the VPP pin required for reflashing.
This BDM Style probe allows reading/writing of the VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the MPPS OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the ByteShooter OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It includes an adaptor to connect the ecu directly to the FG Tech OBD cable.
This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the FG Tech OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the AVDI OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
