Tag: universal

Posted on by

Improved Design! Universal ECU Pinout Cable

This universal pin out cable allows you to connect easily and comfortably to most types control units.

A variety of pins and extra connections are now used, so you can connect to a many different types of ECU’s.

The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.

It features:

  • Female OBD2 port
  • Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
  • LED indicator to confirm when ECU is ON.
  • 6 x 12V connectors for ECU
  • 6 x GND connectors for ECU
  • 3 x switched ignition connectors for ECU
  • Switched ECU Power (ON/OFF)
  • Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
  • Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
  • 2 x CAN Low
  • 2 x CAN High
  • 2 x K-Line
  • 2 x L-Line
  • Kline with diode N4148 for reset function
  • Bootpins: 560Ω / 1KΩ / 4.7KΩ
Buy Now

 

Posted on by

Abrites AVDI VAG AN055 Direct ECU CAN Cable

This adapter cable allows you to connect to the CAN bus communication wires directly at the ECU, whilst utilising the OBD port for all other connections.

This bypasses the CAN gateway as required when using the AN055 function on MED17 and EDC17 controllers.

It is equipped with an OBD female port to attach to your AVDI tool, an OBD male port to connect to the vehicle and a 3 metre cable with CAN connections via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.

The adapter is made using high quality OBD2 moulded connectors. The K-Line is also wired, allowing use on other applications.

 

Buy Now

User Manual

 

Posted on by

Universal OBD K-Line / CAN Direct ECU Cable

This adapter cable allows you to connect the K-Line and CAN directly at the ECU, whilst utilising the OBD port for all other connections.

It is equipped with an OBD female port to attach to your flash tool, an OBD male port to connect to the vehicle and a 3 metre cable with K-line/CAN connection via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.

The adapter is made using high quality OBD2 moulded connectors.

Some applications where this cable can be useful:

Volvo EDC16C31 – K-Line is not wired to the OBD port but required for flashing by most tools.

VW Crafter EDC16CP34 – K-Line is not wired to the OBD port but required for flashing by some tools.

Buy Now

User Manual

 

Posted on by

Universal ECU Pinout Cable

This universal pinout cable allows you to connect easily and comfortably to most types control units.

The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.

It features:

  • Female OBD2 port
  • 12V and GND connectors for power supply
  • 3 x 12V connectors for ECU
  • 3 x GND connectors for ECU
  • Integral CAN bus termination resistor
  • CAN Low
  • CAN High
  • K-Line
  • Kline with diode N4148 for reset function
  • Bootpins: 560Ω / 1KΩ / 4.7KΩ
Buy Now

 

 

Posted on by

VW Crafter EDC16CP34 K-Line Direct ECU Cable

This adapter cable allows you to connect the K-Line on VW Crafter EDC16 directly at the ECU, whilst utilising the OBD port for all other connections.

It is equipped with an OBD female port to attach to your flash tool, an OBD male port to connect to the vehicle and a 3 metre cable with K-line/CAN connection via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.

The adapter is made using high quality OBD2 moulded connectors.

Buy Now

User Manual

,,,

Posted on by

Volvo EDC16C31 K-Line Direct ECU Cable

This adapter cable allows you to connect the K-Line on Volvo EDC16 directly at the ECU, whilst utilising the OBD port for all other connections.

It is equipped with an OBD female port to attach to your flash tool, an OBD male port to connect to the vehicle and a 3 metre cable with K-line/CAN connection via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.

The adapter is made using high quality OBD2 moulded connectors.

Buy Now

User Manual

 

Posted on by

Universal OBD to DQ200 DSG Tricore Cable

This cable allows you to connect most flash tools to Temic DSG DQ200 controllers and can be used to read out the original file direct from the DSG connector as reading over OBD is not possible.

It can be used to read/write all versions of DQ200 on the bench.

The cable has both K-line and CAN wired (with integral termination resistor) and is fitted with an OBD2 female plug allowing connection any flash tool with an OBD2 cable.

Buy Now