Tag: Simos 8

Posted on by

Flex version 4.5.0.0

Bench / Boot for VAG Simos 8.x and Porsche SDIx

MAGICMOTORSPORT has just released Bench/Boot solutions for Continental Simos 8.x ECUs installed in VAG group vehicles, an extra programming mode other than the existing one in OBD for 3000TFSI engines.

Plus, there are new Bench solutions for the Continental SDIx control units installed in an assortment of Porsche vehicles (Cayenne, Macan & Panamera in the 3000 and 4800 Turbo versions). These protocols guarantee a complete and safe backup of the ECU as there is no need to open or tamper with it.

In release 4.5.0.0, the completion of the migration of the Honda Keihin ECUs for map programming and therefore for vehicle tuning operations of the OBD / Bench protocols from MAGPro2 X17 to FLEX has been completed.

In addition to the Honda Keihin protocol, quite a few petrol engines from 1200cc to 1800VTEC, including the Hybrid versions, produced from 2005 to 2017 have also been added to the FLEX vehicle list.

New protocols added:

  • Acura Keihin 37820-R84-A5X OBD: Read/Write/Checksum Flash ( Supported on BENCH too )
  • Audi Continental SIMOS8.5 Bench: Read/Write/Checksum IntFlash, Read/Write IntEeprom
  • Audi Continental SIMOS8.5 Boot: Read/Write/Checksum IntFlash, Read/Write IntEeprom
  • Audi Continental SIMOS8.3 Bench: Read/Write/Checksum IntFlash, Read/Write IntEeprom, Read/Write ExtEeprom
  • Audi Continental SIMOS8.3 Boot: Read/Write/Checksum IntFlash, Read/Write IntEeprom, Read/Write ExtEeprom
  • Audi Continental SIMOS8.4 Bench: Read/Write/Checksum IntFlash, Read/Write IntEeprom, Read/Write ExtEeprom
  • Audi Continental SIMOS8.4 Boot: Read/Write/Checksum IntFlash, Read/Write IntEeprom, Read/Write ExtEeprom
  • Audi Continental SIMOS8.6 Bench: Read/Write/Checksum Maps, Read/Write IntEeprom
  • Audi Continental SIMOS8.6 Boot: Read/Write/Checksum Maps, Read/Write IntEeprom
  • Buick Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • Buick Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Cadillac Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • Cadillac Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Chevrolet Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • GMC Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • Holden Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • Holden Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Honda Keihin 37820-XXX-XXXX OBD: Read/Write/Checksum Flash ( Supported on BENCH too )
  • Hyundai Continental SIM2K-253 Boot: Read/Write/Checksum Maps, Read/Write IntEeprom
  • Kia Continental SIM2K-253 Boot: Read/Write/Checksum Maps, Read/Write IntEeprom
  • Opel Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • Opel Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Pontiac Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • Pontiac Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Porsche Continental SDI6 Bench: Read/Write/Checksum IntFlash, Read/Write ExtEeprom
  • Porsche Continental SDI7 Bench: Read/Write/Checksum IntFlash, Read/Write ExtEeprom
  • Porsche Continental SDI8 Bench: Read/Write/Checksum IntFlash, Read/Write ExtEeprom
  • Porsche Continental SIMOS8.5 Bench: Read/Write/Checksum IntFlash, Read/Write IntEeprom
  • Porsche Continental SIMOS8.5 Boot: Read/Write/Checksum IntFlash, Read/Write IntEeprom
  • Saab Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Saturn Bosch MED9.6.1 OBD: Read/Write/Checksum Maps
  • Saturn Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Vauxhall Bosch ME9.6 OBD: Read/Write/Checksum Maps
  • Volkswagen (VW) Continental SIMOS8.5 Bench: Read/Write/Checksum IntFlash, Read/Write IntEeprom,
  • Volkswagen (VW) Continental SIMOS8.5 Boot: Read/Write/Checksum IntFlash, Read/Write IntEeprom,
  • Volkswagen (VW) Continental SIMOS8.3 Bench: Read/Write/Checksum IntFlash, Read/Write IntEeprom, Read/Write ExtEeprom
  • Volkswagen (VW) Continental SIMOS8.3 Boot: Read/Write/Checksum IntFlash, Read/Write IntEeprom, Read/Write ExtEeprom

Bugfixes:

  • Fixed OBD reading/writing issues on PSA BOSCH MED17.4.2
  • Fixed OBD reading/writing issues on BOSCH EDC16C32
  • Fixed OBD reading/writing issues on DCM3.7 Chevrolet

Software Improvements:

  • Added: new OBD version for BOSCH MED17.5.21
  • Added: OBD support for new BOSCH version MD1CP004 – VAG
  • Added: BENCH support for the latest version of BOSCH MD1CS006 – MB
More info and pricing

 

Posted on by

MPPS VAG Siemens 8x Probe – SIMOS 8.3 8.4 3.0TFSI

This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering.

No additional resistors or boot pins are required!

It is supplied with a cable to connect the ecu directly to the MPPS OBD port. An external power source is required to power the ECU.

This kit includes the Simos 8x probe and ECU cable.

Buy Now

MPPS_S8C_800

User Manual
Posted on by

ByteShooter VAG Siemens 8x Probe – SIMOS 8.3 8.4 3.0TFSI

This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering. No additional resistors or boot pins are required!

It is supplied with a special cable to connect the ecu directly to the BS OBD Cable. An external power source is required to power the ECU. This kit includes the Simos 8x probe and ECU cable.

BS_S8

Buy Now

 

 

Posted on by

CMDFlash VAG Siemens 8x Probe – SIMOS 8.3 8.4 3.0TFSI

This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering.

No additional resistors or boot pins are required!

It is supplied with a special cable to connect the ecu directly to the CMDFlash Boot Interface. Power is supplied by your existing CMD BDM/Tricore power supply.This kit includes the Simos 8x probe and 2 x cables.

Buy Now

 

Simos8_cablePCR_CMD