This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It includes an adaptor to connect the ecu directly to the FG Tech OBD cable.
This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It includes an adaptor to connect the ecu directly to the X17 OBD cable.
This BDM Style probe allows unlocking of VAG SIMOS PCR control unit on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a special cable to connect the ecu directly to the KTAG or Trasdata interface. It can also be used with KESS V2 or Genius if the tool is equipment with the 1.6TDI unlock kit/interface. An additional adapter cable is supplied to allow bench flashing once the ECU is unlocked.
This kit includes the PCR probe and 2 x cables.
This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It includes an adaptor to connect the ecu directly to the ByteShooter OBD cable.
This BDM Style probe allows reading/writing of VAG / Porsche EDC17CP44 control units without soldering.
No additional resistors or boot pins are required!
It is supplied with a special cable to connect the ecu directly to the CMDFlash Boot Interface. LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.
This kit includes the CP44 probe and cable.
This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a special cable to connect the ecu directly to the CMDFlash Boot Interface. Power is supplied by your existing CMD BDM/Tricore power supply.This kit includes the PCR probe and 2 x cables.
ByteShooter update information from 14.08.2012
As you have stated with certainty, it was for some time no published ByteShooter update. This does
not mean that there are no others, on the contrary, but we are working hard on a major update (V4.00).
We want you as a customer in this way to give a small sample of the next update, which will soon be
available.
Finished:
Opel 1.4T/1.6T/2.0T Delco_5_can OBD
Mercedes OM651 OBD CRD2.xx_can
VAG 1.6TDI PCR2.x_can OBD
VAG 1.6TDI PCR2.x_eep Bootmode (Eep unlocker)
VAG DSG 7G DQ200_Kline_can
VAG DSG 7G DQ500_can
BMW OBD MSD8x_can
numerous changes and checksums etc.
What updates are still in preparation
We want to reveal yet at this point. Let us surprise you ;-)
For this update is a hardware firmwareugrade necessary. This firmware upgrade contains several
enhancements and additional protection by an additional hardware dongle via USB or which can be
elegantly integrated into your system as SD_card.
Examples:
This measure is necessary because, unfortunately, has made great efforts in the past, our hardware
and software to manipulate.
