This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the AVDI OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows unlocking of VAG SIMOS PCR control units on the bench without soldering.
No additional resistors or boot pins are required!
It includes an adaptor to connect the ecu directly to the X17 OBD cable.
This BDM Style probe allows reading/writing of VAG EDC17C46 control units without soldering.
No additional resistors or boot pins are required!
It connects directly to the OBD cable of the X17 tool. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch. LED lights are fitted to the underside of the probe to aid alignment. An external power source is required to power the ECU (not included)
This kit includes the EDC17C46 probe and cable to connect to the X17 and power supply.
This BDM Style probe allows reading/writing of Continental SID208 / SID209 control units without soldering. No additional resistors or boot pins are required!
It handles all connections to the ecu and connects directly to the CMDFlash Boot Interface. It can be used to read/write the FLASH/EEPROM memory over Boot Strap Loader, also boot connections are switched to allow password reading.
LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.
This BDM Style probe allows reading/writing of Continental SID807 control units with TC1797 processor without soldering.
No additional resistors or boot pins are required!
It handles all connections to the ecu and connects directly to the CMDFlash Boot Interface. It can be used to read/write the FLASH/EEPROM memory over Boot Strap Loader. LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.
This BDM Style probe allows reading/writing of Continental SID807 control units with TC1796 processor without soldering.
No additional resistors or boot pins are required!
It handles all connections to the ecu and connects directly to the CMDFlash Boot Interface. It can be used to read/write the FLASH/EEPROM memory over Boot Strap Loader. LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.
This BDM Style probe allows reading/writing of DEUTZ / FENDT / VALTRA EDC17CV44 and EDC17CV56 control units without soldering.
No additional resistors or boot pins are required!
It connects directly to the CMDFlash Boot Interface. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch. LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.
This BDM Style probe allows reading/writing of VAG EDC17C46 control units on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a special cable to connect the ecu directly to the KTAG or Trasdata interface. It can also be used with KESS V2 or Genius if the tool is equipment with the tricore bootloader interface.
This kit includes the EDC17C46 probe and cable.
This BDM Style probe allows unlocking of VAG SIMOS PCR control unit on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a special cable to connect the ecu directly to the KTAG or Trasdata interface. It can also be used with KESS V2 or Genius if the tool is equipment with the 1.6TDI unlock kit/interface. An additional adapter cable is supplied to allow bench flashing once the ECU is unlocked.
This kit includes the PCR probe and 2 x cables.
This BDM Style probe allows reading/writing of VAG MED17.5.2 control units without soldering.
No additional resistors or boot pins are required!
It connects directly to the CMDFlash Boot Interface. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.LED lights are fitted to the underside of the probe to aid alignment, Power is supplied by your existing CMD BDM/Tricore power supply.
