Tag: Porsche

Posted on by

VF2 Flasher v2.7.8.0

Dear customer: Today and again we are releasing exclusive solutions for your VF2 Flasher – but this time we are not releasing these solutions alone! From today on you can use your VF2 Flasher to read/write/recover/clone FIAT and PORSCHE Battery Pack Control Modules (BPCM) – these are the modules taking care of battery packs and are fitted for example to 100% Electric Fiat 500E and to Hybrid Porsche Panamera 4S. Thanks to the cooperation between companies – the new Swiftec update features a new module called “BMS/BPCM Recovery Module” and new solutions for PSA, SMART & VAG inverters and BPCM’s have also been added and included in their release! Merry Christmas and a Happy New Year!

BENCH (No need to open or dismantle the control unit):

  • FIAT BPCM TC1797: Read + Write ( All[Backup] / Int. Flash / Int. Eeprom ) / Recovery / Checksum(s)
  • PORSCHE BPCM TC1797: Read + Write ( All[Backup] / Int. Flash / Int. Eeprom ) / Recovery / Checksum(s) / Clone

Youtube Videos:

 

More info and pricing

Posted on by

Flex 5.32.0.0 Porsche PDK

New Boot Solutions for TCU ZF 8-Speed ​​Porsche and Bentley

Magicmotorsport has released new Boot mode solutions for the latest ZF PDK generation, 8DT TC400 and TC401 automatic transmissions equipped with TC275 microprocessors.

Thanks to the new Boot protocol it’s now possible to access the complete contents of the electronic unit with full read and write access to the Internal Flash and EEPROM memories. This allows any chiptuning or repair work.

Supported Vehicles:

  • Porsche Carrera 911 (922) 3.8L 2021
  • Porsche Panamera (971) 3.0L 2021
  • Bentley Bentayga Speed ​​W12 Twin Turbo 2021
  • Bentley Continental GT W12 Turbo 20200

The new protocols are available for the following software packs:

  • FLS0.10 – SW Flex Infineon TC17xx – TCxxx
  • FLS0.2 – SW Flex TCU OBD/Bench

Read time: ~ 1 minute | Write time: ~ 30 seconds

New Protocols:

  • Porsche ZF TC400 – TC401: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full Backup
  • Bentley ZF TC400 – TC401: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full Backup
More info and pricing
Posted on by

CMDFlash V3.2.0.217

OBD: 

BOSCH EDC17C11 NISSAN RENAULT OPEL R/W/CHK/Recovery

BENCH: 

BOSCH MDG1 AURIX BMW OBD Unlock for OBD protected version ( where bench is still open) in this case you will be prompted for unlock after bench read

CONTI SIM12.1 VAG R/W/CHK/CLONE

BOSCH MED17.9.9 LR/JAG DTC 167F Clear
Button “DTC 167F clear” is used to patch ECU preventing P167F error “unauthorized Software” from occurring.
Error is stored on e2p with tuned files and is not clearable by Diag tools.
BENCH Protocol removes error from e2p and patches ECU bootloader to disable it permanently.

 

BOOT: 

ZF PDK2-TC400 AURIX TC275 PORSCHE
ZF PDK2-TC401 AURIX TC275 PORSCHE
DELPHI PSA DCM7.1A reworked protocol ( Fast Read/Write )

 

This software version is Windows 10 Ready!
Only HW2 users are allowed to download this new software version.

More info and pricing
Posted on by

bFlash Update V2108B PDK2

The bFlash team is proud to present to you a new world's first, exclusively for bFlash users!

We now support Porsche 911 (992), Porsche Panamera (971) and the Bentley Bentayga 8 Speed PDK2 gearboxes.

Q&A

How fast is it?
The read time is around 1 minute.

The write time is fast, bFlash fast!

How do I connect to the ECU?
You can use the help function in bFlash for more information.

What control units are included in this bFlash update?
You can find the full list of control units below.

New Boot Protocols:

Bentley

PDK2 TC400 TC275
PDK2 TC401 TC275

Porsche

PDK2 TC400 TC275
PDK2 TC401 TC275

Flashing, datalogging, diagnostics and LIVE tuning;

All in one tool!

Posted on by

bFlash Update V2108A

The bFlash team presents its advanced logging solution exclusively for VAG SIMOS18.1, SIMOS18.10 and PORSCHE SDI21.

This solution is indented to offer you the possibility to load your own logging configuration in bLog.

Our proprietary patch allows high-frequency data acquisition. It can be applied in OBD or BOOT, depending on the methods supported by the OEM ECU.

 

Q&A

How fast is it?
You can log each variable at a rate of 30-50Hz depending on your configuration.

How do I activate this function?
You have to patch the ECU and your A2L once.

Does bFlash provide the definitions?
No, you will need to define your own A2L to work with this feature.

Do I really have access to everything?
Yes all the RAM memory is available, you can log all OEM variables as well as your own custom variables.

New Logger Protocols:

VAG

SIMOS18.1
SIMOS18.10

Porsche

SDI21

Flashing, datalogging, diagnostics and LIVE tuning;

All in one tool!

Posted on by

bFlash Update V2107A

Our latest update covers the AL552 & AL952 transmission control units that can be found in the B9 RS4, the C8 RS6 and more.

It is possible to read and write these control units by OBD.

Q&A

How fast is it?
The write time is 1 minute and 30 seconds for the calibration area.
Reading is virtual and takes only a matter of seconds.
We've added approximately 170 versions online.

How do I connect to the control unit?
You can connect directly to the OBD port of the vehicle.

What control units are included in this bFlash update?
You can find the full list of control units list below.

New OBD Protocols:

Bentley

AL552 / ZF-8HP65AHIS
AL952 / ZF-8HP95AHIS

Porsche

AL552 / ZF-8HP65AHIS
AL952 / ZF-8HP95AHIS

VAG

AL552 / ZF-8HP65AHIS
AL952 / ZF-8HP95AHIS

Flashing, datalogging, diagnostics and LIVE tuning;

All in one tool!

Posted on by

bFlash Update LIVE TUNING!

Live Tuning – Public beta now available!

The bFlash team is proud to present its live tuning solution exclusively for MED17, EDC17, MG1 and MD1 ECUs.

This new plugin, at no extra cost for our current master users, is part of the continuity of the worlds-first products offered by bFlash : the first tool offering all-in-one multi-brand programming, diagnostics and datalogging!

Intended for our expert users, this solution was designed to simplify your work as much as possible, by integrating an editor within the bFlash interface.
The adjustment is carried out in real time via the diagnostic socket, on a pre-patched OEM ECU.

Our proprietary patch, which allows both real-time editing and high-frequency data acquisition, can be applied in BOOT, BENCH or OBD, depending on the methods supported by the OEM ECU.

Take advantage now of this new feature, unique and exclusive to our tool!

Q&A

What is the cost of this new and exclusive feature?
bTrace Advanced (Live Tuning) is free for all our current master users.

How do I use this feature?
You can take a look at our tutorial video here:

Who do you target with this feature?
This new feature is an expert function, it has been designed for master users with advanced calibration and ECU logic understanding.

Does it work for slave users as well?
No, this feature is reserved for master users only.

Does bFlash provide the definitions?
No, you will need to define your own A2L's to work with this feature.

How is it different from the classic edit and flash method?
It is a lot faster than the traditional method because you have an immediate effect.
You can see a practical application of this method for sound tuning / burble calibration in the video below:

What control units are included in this bFlash update?
You can find the full list of control units list below.

Live Tuning Protocols:

 

Honda

BOSCH MED17.9.3-TC1793

Mercedes

BOSCH MED17.7.1 TC1797
BOSCH MED17.7.2 TC1797
BOSCH MED17.7.3 TC1797
BOSCH MED17.7.3.1 TC1797_ExtFlash
BOSCH MED17.7.5 TC1793_ExtFlash
BOSCH MED17.7.7 TC1793

Porsche

BOSCH MED17.1.10 TC1793
BOSCH MD1CP014 TC298
BOSCH MG1CP007 TC298
BOSCH MG1CS002 MPC5777M
BOSCH MG1CS002 TC298
BOSCH MG1CS008 MPC5777M
BOSCH MG1CS008 TC298

Suzuki

BOSCH MED17.9.3 TC1793

VAG

BOSCH EDC17C64 TC1797
BOSCH EDC17C74 TC1793
BOSCH MED17.1.1 TC1797
BOSCH MED17.1.27 TC1793
BOSCH MED17.1.62 TC1793
BOSCH MD1CP004 MPC5777M
BOSCH MD1CP004 TC298
BOSCH MD1CP014 TC298
BOSCH MG1CS001 MPC5777M
BOSCH MG1CS002 MPC5777M
BOSCH MG1CS002 TC298
BOSCH MG1CS008 MPC5777M
BOSCH MG1CS008 TC298
BOSCH MG1CS011 MPC5777M

Flashing, datalogging, diagnostics and LIVE tuning;

All in one tool!

Posted on by

NEW: Universal VAG MG1 Bench Cable

Our new universal cables use a unique connection which can be coupled with an adapter for different flash tools.

This allows the same cable to be used with multiple flash tools!

This cable allows you to connect your flash tool easily and comfortably to various VAG MG1 ECUs (6 connector version), compatible with:

  • MG1CS002
  • MG1CS008
  • MG1CS047 (Porsche)
  • MG1CP007 (Porsche)

 

 

Posted on by

bFlash Update V2007A – Porsche PDK OBD

Porsche PDK7 Gearbox solution by OBD!

Q&A

How fast is it?
The calibration write time is around 1 minute.
A full software flash takes around 6 min 30 seconds.
Reading is a virtual read.

 

Do I need to buy an extra bFlash module?
Of course not! This protocol is active now, for all users.

 

How do I connect to the ECU?
You can connect the car through the OBD socket located in the car.

 

What control units are included in this bFlash update?
You can find the full list of control units below.

New TCU OBD Protocols:

PORSCHE

PDK-TC210.g1 – TC1766
PDK-TC210.g2 – TC1766
PDK-TC240 – TC1767

Flashing, datalogging & diagnostics.

All in one tool!