Tag: IO

Posted on by

Marelli Plugin for I/O Terminal Tool

The ultimate tool for Magneti Marelli ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify odometer mileage stored in eeprom memory.

It works with Siemens ECU’s for Fiat, Opel, Suzuki and Vauxhall.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

Buy Now

 

Supported ECU’s:

Suzuki Magneti Marelli Multijet MJD 6O2 Kline – Read/Write Flash + Processor + Eeprom

Suzuki Magneti Marelli 8DS CAN – Read/Write Flash + Eeprom

Opel Magneti Marelli Multijet MJD 6JO 1.3 Kline Z13DT – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 Kline Z13DTJ SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH – Read/Write Flash + Processor + Eeprom + Change Odometer

Opel Magnetti Marelli Multijet MJD 6O2 1.3 CAN Z13DTH SPANSION – Read/Write Flash + Processor + Eeprom + Set Virgin Mode

Opel Magnetti Marelli Multijet MJD 6O3 1.3 CAN Z13DTH – Read/Write Flash + Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 9GF CAN – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSF CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GSW CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMW CAN – Read/Write Processor + Eeprom + Change Odometer

Fiat Magneti Marelli 8GMF HW02 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli 8GMF HW03 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8DF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F2 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli MJD 8F3 CAN – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW204 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 4AF HW407 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5SF3 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF3 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF8 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 Kline – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 5SF9 CAN – Read/Write Flash + Emulated Eeprom + Change Odometer

Fiat Magneti Marelli IAW 59F  HW<100 CPU32 Kline – Read/Write Flash + Eeprom + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 59F  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW303/HW306 ST10F168  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5AF  HW603/HW607 ST10F269  Kline – Read/Write Flash + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli IAW 5NF.T1-IAW 5NF.T9 Kline – Read (Only) Flash, Read/Write Eeprom + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6JF Kline – Read/Write Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Multijet MJD 6F3 Kline SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Fiat Magneti Marelli Mutijet MJD 6F3 CAN SPANSION – Read/Write Flash + Processor + Eeprom + Change Odometer + Set Virgin Mode

Posted on by

Denso Plugin for I/O Terminal Tool

The ultimate tool for Denso ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a JTAG programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify odometer mileage stored in eeprom memory.

It works with Denso ECU’s for Mazda, Mitsubishi, Nissan, Opel, Suzuki, Vauxhall and Volvo.

Also included is a checksum correction facility for flash memories.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

Buy Now

 

Supported ECU’s:

Jaguar/ Jaguar XF 4.2SC DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Landrover / Range Rover AJ33 4.2 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Landrover P3.0NA DENSO 64F7058 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Opel Meriva, Corsa C 1.7 CDTI Hybrid ECU – Full R/W 64F7055, R/W 93C66 eeprom, show pin code , reset(virgin). (CAN & K-LINE)

Opel Vectra C/Signum 3.0 CDTI – Full R/W 64F7058, R/W 93C86 x2 eeprom , show pin code , odometer calibration, reset(virgin). (CAN)

Opel 1.7CDTI 110CV/125CV Z17DTJ/Z17DTR/Z17DTH/A17DTH/A17DTR Astra H, Astra J, Zafira B, Corsa D, Meriva B, Tigra B – Full R/W 64F7058, R/W 93C86 x3 eeprom , odometer calibration, show pincode , reset(virgin). Full R/W 64F7059, R/W 93C86 x4 eeprom , odometer calibration, show pin code , reset(virgin). (CAN)

Mazda 3,5,6 RF7/RF8 ECU -Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Mazda 2 1.5 from year 2010 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)

Mazda RX8 Denso – Full R/W 64F7055, R/W 93C56 eeprom. (CAN)

Nissan Navara, Xtrail, Pathfinder 2.5DCI 2005-2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Nissan Navara/Pathfinder D40 2.5DCI from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)

Nissan Xtrail, Almera Tinos 2.2DCI 136v – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)

Mitsubishi Delica D5/Outlander 2.2DID 4N14 from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)

Mitsubishi L200, Pajero 4D56/4M41 2.5DID 136CV <2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)

Mitsubishi L200, Pajero 4D56/4M41 2.5/3.2 DID 2009> – Full R/W 64F7059, R/W 93C86 eeprom. (CAN)

Subaru Forester 2.0D KH 2007 – Full R/W 64F7058, R/W 93C86 eeprom (CAN)

Suzuki 1.3 <2007 – Full R/W 64F7055 R/W 93C56 eeprom. (CAN)

Suzuki 1.3, 1.5, 1.6 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)

Suzuki Jimny <2007 1.3 – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)

Volvo V50, S40, V40 2006-2010 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)

Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)

Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7055, full R/W external flash 29LV200BC , R/W 93C56 eeprom. (CAN)

Volvo XC90 3.2L YC 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)

Posted on by

I/O Terminal Tool OBD Cable

We can offer a replacement OBD2 cable to be used with I/O Terminal tool interface.

This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the unique RS232 connection. CAN bus, K-Line and L-Line are wired.

* Please note – This cable does not work with any other tools, it is specifically made for the I/O Terminal tool.*

Buy Now