We can offer a replacement cable to be used with older ByteShooter and Flashbooster tools.
This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the unique Byteshooter RS232 connection.
* Please note – This cable does not work with any other tools, it is specifically made for ByteShooter / Flashbooster tools only *
We can offer a replacement cable to be used with ByteShooter tools.
This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the unique Byteshooter RJ45 connection, compatible with ByteShooter Basic and Crossfire tools.
* Please note – This cable does not work with any other tools, it is specifically made for ByteShooter only *
This kit allows you to connect your AVDI easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your AVDI to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to the AVDI interface, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
This adapter cable allows you to connect the K-Line on VW Crafter EDC16 directly at the ECU, whilst utilising the OBD port for all other connections.
It is equipped with an OBD female port to attach to your flash tool, an OBD male port to connect to the vehicle and a 3 metre cable with K-line/CAN connection via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.
The adapter is made using high quality OBD2 moulded connectors.
,,,
This adapter cable allows you to connect the K-Line on Volvo EDC16 directly at the ECU, whilst utilising the OBD port for all other connections.
It is equipped with an OBD female port to attach to your flash tool, an OBD male port to connect to the vehicle and a 3 metre cable with K-line/CAN connection via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.
The adapter is made using high quality OBD2 moulded connectors.
