This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the ByteShooter OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering.
No additional resistors or boot pins are required!
It is supplied with a cable to connect the ecu directly to the MPPS OBD port. An external power source is required to power the ECU.
This kit includes the Simos 8x probe and ECU cable.
This BDM Style probe allows unlocking of VAG SIMOS 8x control units on the bench without soldering. No additional resistors or boot pins are required!
It is supplied with a special cable to connect the ecu directly to the BS OBD Cable. An external power source is required to power the ECU. This kit includes the Simos 8x probe and ECU cable.
This BDM Style probe allows reading/writing of VAG EDC17C46 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the ByteShooter OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This kit allows you to connect your ByteShooter easily and comfortably to many types of VAG EDC17 /MED17 to read/write over boot mode.
The kit includes:
This kit provides a clean connection to ECU boot pads without soldering!
Simply connect your ByteShooter to the ECU with the cable provided, screw the plate to the control unit and align the boot pins with the corresponding pads on the ecu. Then power the ecu and you are ready to read/write!
It is designed to work with controllers using TC1766 and TC1796 processor, this includes:
This kit will not work with controllers using TC1767 or TC1797, however we will offer probes for these controllers soon (e.g EDC17C46, EDC17CP44, MED17.5.2 etc…)
* Please note: This cable has a special pinout which is unique to ByteShooter, we do not recommend use with any other tools. If you need a similar cable for a different tool please contact us *
