Tag: bitedit

Posted on by

BitBox 3.2.0 rev 1

New families:

  • MB Delphi CRD2.XX (FID:217) added to MB Delphi Diesel CAN module with reading/writing and checksums calculation
  • BMW Exx Bosch MEVD17.2.6 (FID:138) added to BMW Exx Bosch CAN module with virtual reading/writing and checksums calculation

Improvements and fixes:

  • Fixed master/slave system for recovery files
  • Some renaming and fixes in interfaces
  • Improved system logging

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.9 rev 1

New modules:

  • China Diesel CAN introduced with FID145: China Delphi DCM3.7AP CAN with reading/writing and checksum calculation

New families:

Improvements and fixes:

  • Motorola NGC3 added detection of unsupported old types of ECU during identification
  • Continental GPEC2A 2018+ fixed bug with wrong family selection
  • Fixed authentication for ME17.8.8 bug
  • Identification and virtual reading fix for BMW Marelli MBC1
  • Fixed writing coding in BMW Fxx and BMW Gxx ENET in some cases

Corrections and improvements:

  • Added special power adapter pin configuration and now PCM PowerBox also supported.
  • Cars/Tracks section in car list was split to Cars/LCV and Trucks/Industrial

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.8 rev 1

New modules:

  • MB Delphi Diesel CAN with Delphi CRD3.XX family with reading/writing and checksum calculation.
  • Trucks Delphi ETC3 CAN with 2 families:
    • DAF / Industrial Delphi ETC3 (FID: 220)
    • Hyundai Delphi ETC3 (FID: 221) / TEST /

New families:

  • China Bosch ME17.8.8 SAIC added to China Bosch Petrol module

Improvements and fixes:

  • GPEC2A 2018+ writing algorithm remade, now writing flash and maps and fix P1400 problem. New protection removal patch
  • GPEC3 HW2 finally tested and remove protection now works!
  • Sim2K-25X, Sim2K-260, Sim271 made reading flash and maps data for valid checksums patch
  • Added detection of Gen2 (new protection) for ACDelco modules

Corrections and improvements:

  • Unlicensed identification released. Now you can do module identification even when module is not purchased. In some cases identification will be reduced.
  • Master/Slave system fixes

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.7 rev 1

New families:

  • SsangYong Delphi DCM6.2AP-6D with new MCU added to SsangYong Delphi Diesel with read/write and checksums correction.

Improvements and fixes:

Master / Slave:

  • CVN fix for Toyota made when Master creating file for slave
  • Slave now can write original file without Master, if file was read from vehicle.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.6 rev 1 – MB Siemens/Continental SIM271

New module:

MB Siemens/Continental SIM271 added with 2 new families.

  • Continental SIM271DE2.0 TC1796 with bench reading/writing and checksum calculation
  • Siemens SIM271KE2.0 TC1796 with bench reading/writing and checksum calculation

New families:

Improvements and fixes:

  • PSA Delphi DCM6.2A now made full flash reading
  • Fixed writing start for MB MED17 families

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.5 rev 2 – Kia / Hyundai SIM2K-25x / 26x

New module:

Kia/Hyundai Continental Sim2K-25x/26x BSL added in test mode.

FID:150 Continental SIM2K-250/251/253 TC1782 read/write with special adapter BITS001. CS calculation and CVN fix!
Continetnal SIM2K-25x with TC1767 and SIM2K-26x with TC1793 are already in development and will be added as soon as possible!

Improvements and UI fixes:

  • Personal files crypt system now released. Contact to support for details!
  • UI fixes and backup system made for new module

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.4 rev 4 – PSA EDC17C10 added!

Module PSA Delphi Diesel CAN now renamed and refactored to PSA Diesel CAN.

New families:

Improvements and fixes in families:

  • Volvo Denso bench module optimized for working with more J2534 devices
  • Infiniti MED17.7.2 added more ECU types
  • Toyota Denso Gen2 Type 2 fixed writing when file was not found on server
  • Toyota Denso Gen1 CAN fixed virtual reading for slave system
  • Delphi MT2x done some improvements for more stable work
  • Toyota TCM virtual reader fixed identification for some ECU types
  • Added some ECU types for China Bosch ME7.8.8 K-Line
  • Rotax MSE3.7 K-Line module totally remade
  • ACDelco families now require original file now for calculation additional torque monitoring checksums. Checksums fixes made for: E39, E39A, E78, E87, E83, E98, E92.

GUI fix and improvements:

  • Added automatically log request for support team
  • Application loading improvement

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.3 rev 1 released

New families and improvements:

  • Infiniti Bosch MED17.7.2 (FID:208) added to MB Bosch MED17 CAN module in test mode.
  • MB Bosch EDC17CP01 (FID:207) added to MB Bosch EDC17 CAN module in test mode
  • Maserati with Bosch EDC17C79 is now supported with FID:107

Fixes:

  • Fixed uploading file with correct checksum for slave. Now master will be asked about uploading

 

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.2 rev 4 – Mercedes MED17 added!

New modules:

Mercedes Benz MED17 CAN

  • MB Bosch MED17.7.2 with virtual reading, writing and checksums calculation!
  • MB Bosch MED17.7.1/MED17.7.3 with virtual reading, writing and checksums calculation!
  • MB Bosch MED17.7.3.1 with virtual reading, writing and checksums calculation!

This list will be updated as soon as possible to support all MB MED17 ECUs

New families:

  • Ford Bosch EDC17CV41 added to Trucks/Industrial Bosch EDC17CV41 module in test mode
  • FCA Bosch EDC17C49/C79 Bench reading family added for reading and checking files on bench when virtual reading file is not available on server!
  • Bosch EDC17C43 support added to MB Bosch EDC17 CAN module with reading/writing and checksums calculation

Improvements and fixes in families:

  • Fixed writing of some Hyundai DMCI types of ECU.
  • Fixed writing of Toyota Denso Gen1 TCM in some cases
  • MB Bosch EDC17CP10 added reading of new ECU type

GUI fix and improvements:

  • Fixed Master files window state
  • Added Slave file removal in Master window
  • Added show/hide filter of used files in Master window
  • Fixed filtering by slave user in Master window

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

BitBox 3.1.1 rev 1 – Mercedes EDC17 + PSA DCM6.2 released!

New modules:

Mercedes Benz EDC17 CAN

  • MB Bosch EDC17CP01/CP10 – supports real reading/writing and checksums calculation. Writing of calibrations area only!
  • MB Bosch EDC17CP46 – supports real reading/writing and checksums calculation. Writing of calibrations area only!
  • MB Bosch EDC17CP57/CP60/C66 – supports real reading/writing and checksums calculation. Writing of calibrations area only!

PSA Delphi Diesel CAN

  • PSA Delphi DCM6.2 – supports real reading/writing and checksums calculation!

 

More Info

 

View Full Range of modules here.

bitbox_logo