A new PCMFlash release is now available, includes:
New module 75 “Ford Power Stroke” designed to work with the Bosch EDC17 ECUs, installed 6.7l diesel engines in Ford cars.
It supports reading, writing and correcting of checksums.
Ford Truck: 6.7L Power Stroke V8 (EDC17CP05) [BC3A] [ RD / WR / CK ]
Ford Truck: 6.7L Power Stroke V8 (EDC17CP05) [FC3A] [ RD / WR / CK ]
Ford Truck: 6.7L Power Stroke V8 (EDC17CP65) [HC3A] [ RD / WR / CK ]
New module 76 “Kia / Hyundai Gearbox” for use with automatic transmission ECUs installed in some Kia / Hyundai vehicles.
It supports reading, writing and checksum correction.
Kia / Hyundai: MG7.9.8 / MEG17.9.12 Gearbox (ST10F275 / TCU) [ RD / WR ]
Kia / Hyundai: TC14 Gearbox (MPC562 / TCU) [ RD / WR / CK ]
Kia / Hyundai: TC60 / TC80 / ME (D) G17.9.8 / 13 Gearbox (SH72549 / TCU) [ RD / WR / CK ]
Kia / Hyundai: SIM2K-24x / 341 Gearbox (TC1766 / TCU) [ RD / WR / CK ]
Kia / Hyundai: SIM2K-24x Gearbox (TC1738 / TCU) [ RD / WR / CK ]
Kia / Hyundai: SIM2K-34x Gearbox (TC1738 / TCU) [ RD / WR / CK ]
Updated module 21 “Ford USA” now with support for Bosch ME9.8 / MEG9.8.1
Mazda6 3.0L AJ 2003-2005 [ RD / WR / CK ]
Escape, Explorer, Mazda CX9-2009 (PCM150F) [ RD / WR / CK ]
Mustang 2005-2009 (PCM170F) [ RD / WR ]
Explorer, Mazda CX9 2010-2011 / 2012 (M799G) [ RD / WR / CK ]
Focus 2008-2011 (GreenOak / PCM190) [ RD / WR / CK ]
Escape, Mariner, Tribute 2009-2011 (9L8A ) [ RD / WR / CK ]
Ford F350 6.0L (BlackOak / PCM122 / 448KB) [ RD / WR / CK ]
Expedition, Navigator 5.4L (Bosch ME9.8 / 2048KB) [ RD / WR / CK ]
F-150 5.4 L (Bosch MEG9.8.1 / 2536KB) [ RD / WR / CK ]
Updated module 22 “Renault” now with support forEMS3155 ECU, which is installed in a Nissan Juke with a 1.2l turbo engine.
Valeo V40 / V42 (SH7058 / 1024KB) [ RD / WR / CK ]
Sagem 3000 (SH7055 / 512KB) [ RD / WR / CK ]
EMS3110 (TC1766 / 1504KB) [ RD / WR / CK ]
Logan, Sandero, Fluence, Megane, Almera EMS3120 (TC1738 / 2048KB) [ RD / WR / CK ]
Duster, X-Ray EMS3125 (TC1782 / 2560KB) [ RD / WR / CK ]
Clio 4 1.6T EMS3150 (TC1767 / 2048KB) [ RD / WR / CK ]
Juke 1.2T EMS3155 (TC1782 / 2560KB) [ RD / WR / CK ]
Updated module 29 “Ford PWM” now with support for EEC-V.
Mondeo 3 1.8L, 2.0L, 2.5L, 3.0L Duratec HE (LEVANTA) [ RD / WR / CK ]
EEC-V 216K (EEC-V) [ RD / WR / CK ]
3.0L, 4.0L, 4.6L Duratec V6 / V8 (PCM150) [ RD / WR / CK ]
1.8L, 2.0L, 2.2L Duratorq TDCi (Visteon) [ RD / WR ]
1.8L, 2.0L, 2.2L Duratorq TDCi (Delphi) [ RD / WR ]
Updated module 41 “Scania EMS S6 / EDC S6” now with support for EDC S6 ECU.
Scania EMS / EDC S6 250Kbps (MPC555) [ RD / WR / CK ]
Scania EMS S6 500Kbps (MPC555) [ RD / WR / CK ]
Updated module 44 “Scania EMS S7 / S8 / EMD1” now with support for EMD1 ECU.
Scania EMS S7 250Kbps (MPC563) [ RD / WR / CK ]
Scania EMS S8 250Kbps (MPC5566) [ WR / CK ]
Scania EMS S8 / EMD1 500Kbps (MPC5566) [ WR / CK ]
Updated module 46/74 “Toyota”, a new type of P5-CAN has been added
76F0196 / 198/199/219 CAN-bus [ WR / CK ]
76F0196 / 198/199/219 P5-CAN-bus [ RD / WR / CK ]
76F0199 GearBox P5-CAN -bus [ RD / WR / CK ]
R7F701202 P5-UDS [ RD / WR / CK ]
Updated module 47 “Mitsubishi Gearbox CAN-bus” added support for checksum correction for Mitsubishi control units, as well as support for CVT control units with MH8115, and AWD, ACD control units.
CVT Lancer X / ASX 1.8 / 2.0L, Outlander XL / 3 2.0 / 2.4L (MH8104F / 512KB MH8106F / 1MB) [ RD / WR / CK ]
AT Pajero Sport (2010-), Lancer X 1.5 / 1.6L (MH8102F / 512KB) [ RD / WR / CK ]
AT Outlander XL 3.0L (MH8104F / 512KB) [ RD / WR / CK ]
CVT ASX / Outlander 3 / Eclipse Cross 1.5T / 2.0L / 2.4L ( MH8115F / 1.25MB) [ WR / CK ]
TC-SST Getrag 6DCT470 [ RD / WR / CK ]
Getrag 6DCT470 Boot (MICRO) [ RD / WR / CK ]
Getrag 6DCT470 Boot (EEPROM) [ RD / WR / CK ]
Updated module 48 “VAG ME (D) 17 UDS” now with support for MED17.1.1 ECU Master/Slave variants.
1.4L, 1.8L TSI (MED17.5 / MED17.5.2 / MED17.5.5) [ VR / WR / CK ]
1.0L, 1.2L, 1.4L TSI (MED17.5.21 / MED17 .5.25) [ VR / WR / CK ]
1.0L, 1.6L MPI (ME17.5.20 / ME17.5.24 / ME17.5.26) [ VR / WR / CK ]
2.0L, 2.5L, 4.0L TSI, 4.2L FSI ( MED17.1 / 17.1.1 / 17.1.10 / 17.1.62) [ VR / WR / CK ]
1.4L TSI, 3.6L FSI (MED17.1.6 / MED17.1.21) [ VR / WR / CK ]
5.2L FSI Master / Slave (MED17.1.1) [ VR / WR / CK ]
Updated module 51 “China” now with support for new ME17 / MED17 ECUs.
Chery / Great Wall / Lifan ME17 (ME17.8.8) [ RD / WR / CK ]
Chery 2019+ ME17 (ME17.8.8)
Great Wall / Haval MED17 (MED17.8.10) [ RD / WR / CK ]
Geely ME17 (ME17.8.8.1) [ RD / WR / CK ] reading requires a direct connection to the ECU connector
Geely MED17 (MED17.8.10) [ RD / WR / CK ]
MG MED17 (MED17.8.10) [ RD / WR / CK ]
Chevrolet 1.5L Aveo / Sail 3 (ME17.8.8) [ RD / WR / CK ]
Geely / Great Wall / LuxGen MT80 K-Line [ RD / WR / CK ]
Geely / Great Wall / LuxGen MT80 CAN-bus [ RD / WR / CK ]
Updated module 53 “Infineon Tricore BSL” added support for ECU JLR SID208, PSA EDC17C60, PSA MED17.4.4, Delphi CRD3 / CRD3P.
TC1762 / TC1766 MICRO (1504KB)
TC1762 / TC1766 EEPROM (32KB)
TC1792 / TC1796 MICRO (2048KB)
TC1796 MICRO + EXT (4096KB / 6144KB)
TC1796 EXT (2048KB / 4096KBR)
TC1792
E176 128KB)
TC1738 / TC1767 MICRO (2048KB)
TC1738 / TC1767 EEPROM (64KB)
TC1797 MICRO (4096KB)
TC1797 EEPROM (64KB)
TC1797 MICRO + EXT (6144KB / 8192KB)
TC1797 EXT (2048KB / 4096KB)
TC1724 / TC1728 MICRO (1536KB)
TC1724 / TC1728 EEPROM (64KB)
TC1782 / TC1784 MICRO (2560KB)
TC1782 / TC1784 EEPROM (128KB)
TC1791 / TC1793 MICRO (4096KB)
TC1791 / TC1793 EEPROM (192KB)
TC1791 / TC1793 MICRO + EXT (6144KB / 8192KB)
TC1791 / TC1793 EXT (2048KB / 4096KB)
Delphi MT86 EEPROM (16KB)
Delphi CRD3.1 EEPROM (32KB)
Updated module 59 “Renault / Nissan UDS” added support Hitachi ECUs with the microcontroller R7F701205.
10000R 1.2T EMS3155 UDS (TC1782 / 2.5MB) [ RD / WR / CK ]
1.5L dCi SID309 UDS (TC1767 / 2MB) [ RD / WR / CK ]
1.5L, 2.3L dCi SID310 UDS (TC1791 / 3MB) [ RD / WR / CK ]
1.6L dCi EDC17C84 UDS (TC1782 / 2.5MB) [ RD / WR / CK ]
1.6L dCi EDC17C84 UDS (Injectors) [ RD / WR ]
1.8T, 2.0T Hitachi UDS (RH850 / 4MB) [ RD / WR / CK ]
0.66L, 1.6L Hitachi UDS (R7F701205 / 2MB) [ RD / WR / CK ]
Updated module 61 “Kia / Hyundai CPGDSH / CPEGD” adds support for CPEGD2.20.3 / CPEGD2.20.4 ECUs.
1.6L (CPGDSH2.24.1 / CPEGD2.20.1 / UDS) [ RD / WR / CK ]
Kia / Hyundai: 1.4T, 1.6L (CPEGD2.20.3 / CPEGD2.20.4 / UDS) [ RD / WR / CK / UNLOCK ] direct connection required
Updated module 69 “Mercedes-Benz MED17 / EDC17” added support for the ECU MED17.7.2, installed in Infiniti cars, as well as EDC17C43.
MED17.7.1 / 17.7.2 / 17.7.3 / 17.7.3.1 / 17.7.5 [ VR / WR / CK ]
EDC17CP01 / CP10 [ RD / WR / CK ] only ECU with external flash memory
EDC17C43 / CP46 / CP57 / CP60 / C66 [ RD / WR / CK ]
Updated module 70 “Jeep EDC17” added support for the EDC17CP27 ECU
2.8L CRDI (EDC17CP27) [ RD / WR / CK ]
3.0L CRDI (EDC17C49 / C79) [ RD / WR / CK ] Reading may require direct connection to the computer
Updated module 71 “Bosch MEDC17 Bootloader” added support for the PSA EDC17C60, PSA MED17.4.4 ECU
MEDC17 (TC1762 / 1766/1792/1796) FLASH [ RD / WR / CK ]
MEDC17 (TC1762 / 1766/1792/1796 ) EEPROM [ RD / WR ]
MEDC17 (TC1724 / 1728/1767/1782/1784/1797) FLASH [ RD / WR / CK ]
MEDC17 (TC1724 / 1728/1767/1782/1784/1797) EEPROM [ RD / WR ]
MEDC17 (TC1791 / 1793) FLASH [ RD / WR / CK ]
MEDC17 (TC1791 / 1793) EEPROM [ RD / WR ]
MEDC17 BSL PASSWORD [ RD ]
Updated modules 48, 50, 57, 58, 65, virtual reading of files from the server is added.
Changes in the interface of the main window of the program, the “Virt. Read” button is added, plus other fixes that improve the software.
