Posted on

Improved Design! Universal ECU Pinout Cable

This universal pin out cable allows you to connect easily and comfortably to most types control units.

A variety of pins and extra connections are now used, so you can connect to a many different types of ECU’s.

The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.

It features:

  • Female OBD2 port
  • Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
  • LED indicator to confirm when ECU is ON.
  • 6 x 12V connectors for ECU
  • 6 x GND connectors for ECU
  • 3 x switched ignition connectors for ECU
  • Switched ECU Power (ON/OFF)
  • Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
  • Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
  • 2 x CAN Low
  • 2 x CAN High
  • 2 x K-Line
  • 2 x L-Line
  • Kline with diode N4148 for reset function
  • Bootpins: 560Ω / 1KΩ / 4.7KΩ

 

Posted on

AVDI VAG MED17.5.2 Probe

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the AVDI OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Posted on

FG Tech VAG MED17.5.2 Probe

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the FG Tech OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Posted on

ByteShooter VAG MED17.5.2 Probe

 

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the ByteShooter OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Posted on

MPPS VAG MED17.5.2 Probe

This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.

No additional resistors or boot pins are required!

It connects directly to the MPPS OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.

LED lights are fitted to the underside of the probe to aid alignment.

The Kit includes an OBD adaptor cable and a 12V power supply.

Posted on

Abrites AVDI VAG AN055 Direct ECU CAN Cable

This adapter cable allows you to connect to the CAN bus communication wires directly at the ECU, whilst utilising the OBD port for all other connections.

This bypasses the CAN gateway as required when using the AN055 function on MED17 and EDC17 controllers.

It is equipped with an OBD female port to attach to your AVDI tool, an OBD male port to connect to the vehicle and a 3 metre cable with CAN connections via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.

The adapter is made using high quality OBD2 moulded connectors. The K-Line is also wired, allowing use on other applications.

 

 

Posted on

I/O Terminal Tool OBD Cable

We can offer a replacement OBD2 cable to be used with I/O Terminal tool interface.

This is a heavy duty 1 metre cable with high quality OBD2 moulded connector and the unique RS232 connection. CAN bus, K-Line and L-Line are wired.

* Please note – This cable does not work with any other tools, it is specifically made for the I/O Terminal tool.*

 

Posted on

NEW Design! Aluminium BDM Positioning Frame

Aluminium BDM positioning frame. This frame is compatible with all nearly all tools/probes on the market.

The platform is aided by ball bearings for smooth operation and the probe housing is fully adjustable backwards, forwards and from left to right.

The frame also includes positioning pins for Bosch controllers.