Description
Universal module for bench reading and writing of locked 06.2020+ Bosch MG1/MD1 Gen2 ECUs.
Attention! This module works only with Scanmatik SM3. Requires a direct connection to the ECU connector using any adapter with automatic power management (Scanmatik bench cable, BITS001, Powerbox, etc…)
Bosch MG1/MD1 BMW TC2XX/SPC5777 BENCH [SM2/SM3 ONLY] (FID: 577)
Supported ECU types:
- MG1CS003
- MG1CS024
- MG1CS049
- MG1CS201
- MD1CS001
- MD1CP002
- MD1CP032
Bosch MG1/MD1 TC2XX BSL/BENCH [SM2/SM3 ONLY] (FID: 582)
Attention! This protocol requires confident ECU opening and soldering skills.
All ECU modifications and use of this solution are performed entirely at your own risk. We accept no responsibility for damaged ECUs, lost data, or damaged equipment.
Damaged or “bricked” ECUs are not considered a support case. Technical support does not cover ECU repair, recovery, replacement, or compensation for any related expenses.
Allows unlocking of locked ECUs in BSL mode using Voltage Glitch, as well as BENCH reading and writing Flash memory (after unlocking) with automatic detection of the processor type and memory size, and reading and writing EEPROM. ECU opening is required for BSL unlocking. Checksum correction is performed automatically during writing.
Works only with Scanmatik SM2 PRO/SM3 J2534 adapters. Driver updates are required —
To unlock the ECU in BSL mode, OR pin 13 of the Scanmatik must be connected through a Zener diode and a tantalum capacitor according to the manual, OR the BITS002 adapter can be used.
We strongly recommend reading EVERYTHING provided in the manual before starting any work.
Supported MCUs: Infineon AURIX TC298, TC299
Supported ECU types:
Kia/Hyundai:
MD1CS012
JLR:
MD1CP017
PSA:
MD1CS003
MG1CS042
VAG:
MD1CS004
MD1CS014
MG1CS002
MG1CS011
MG1CS031
MG1CS111
Trucks/Ind:
MD1CE100
China:
MD1CS089
Support for other ECU types, MCU processors, operation methods, and working modes will be added later whenever possible.
