Tag: unlock

Posted on by

VF2 Flasher v2.9.3.5

Dear clients and friends we are very pleased to announce UNLOCK services for MD1CS069 control units fitted to CASE / FIAT / IVECO / LANDINI / MITSUBISHI FUSO / NEW HOLLAND and STEYR vans, tractors and other industrial vehicles. This is a service provided exclusively to our clients, owners of a VF2 Flasher, as a mail-in service to GTD headquarters in Portugal. The service usually takes 2-3 business days but as some of you already know we’ve been processing KIA / HYUNDAI MD1CS012; PSA MD1CS003 / MG1CS042 and BMW MD1CS001 / MD1CP032 / MG1CS024 / MG1CS049 / MG1CS201 control units the same day! As usual you may contact support for further details. Please do note that the service will be limited during the next 23-26 and 31 December and 1-2 of the new year!

BENCH (Service Mode)

  • CASE MD1CS069 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • FIAT MD1CS069 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • IVECO MD1CS069 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • LANDINI MD1CS069 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • MITSUBISHI FUSO MD1CS069 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • NEW HOLLAND MD1CS069 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • STEYR MD1CS069 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)

VIDEO:

More info and pricing

Posted on by

VF2 Flasher v2.9.3.4

Dear clients and friends – we’re back to world firsts ! We are very pleased to announce UNLOCK services for MD1CS012 control units fitted to KIA / HYUNDAI & GENESIS vehicles. This applies to any and all units produced after 2020 – of course also including units produced in 2025 ! This is a service provided exclusively to our clients, owners of a VF2 Flasher, as a mail-in service at GTD headquarters in Portugal. The service usually takes 2-3 business days but as some of you already know we’ve been processing PSA MD1CS003 / MG1CS042 and BMW MD1CS001 / MD1CP032 / MG1CS024 / MG1CS049 / MG1CS201 control units the same day! As usual you may contact support for further details.

BENCH (Service Mode)

  • GENESIS MD1CS012 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • HYUNDAI MD1CS012 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • KIA MD1CS012 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)

VIDEO:

More info and pricing

Posted on by

VF2 Flasher v2.9.3.3

Dear clients and friends – you’ve been promised 3 updates this month and as promised we are delivering the first one. We are very pleased to announce UNLOCK services for MD1CS001 / MD1CP032 / MG1CS024 / MG1CS049 / MG1CS201 control units fitted to ALPINA / BMW / INEOS / MINI / ROLLS ROYCE & TOYOTA vehicles. This applies to any and all LOCKED control units produced after 07/2020 for 1.5L / 2.0L / 3.0L Diesels and 1.2L / 1.5L / 2.0L / 3.0L / 4.4L / 6.6L & 6.75L Petrol engines. This service is provided exclusively to our clients, owners of a VF2 Flasher, as a mail-in service at GTD headquarters in Portugal. The service usually takes 2-3 business days but as some of you already know we’ve been processing PSA MG1CS042 & MD1CS003 units same day. As usual you may contact support for further details.

BENCH (Service Mode)

  • ALPINA MD1CP032 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • ALPINA MG1CS201 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • BMW MD1CS001 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • BMW MD1CP032 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • BMW MG1CS024 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • BMW MG1CS049 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • BMW MG1CS201 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • INEOS MD1CP032 TC299: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • INEOS MG1CS024 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • MINI MD1CS001 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • MINI MG1CS024 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • MINI MG1CS049 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • MINI MG1CS201 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • ROLLS ROYCE MG1CS024 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • ROLLS ROYCE MG1CS049 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • ROLLS ROYCE MG1CS201 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • TOYOTA MG1CS024 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • TOYOTA MG1CS049 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • TOYOTA MG1CS201 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)

VIDEO:

More info and pricing

Posted on by

MMS FLEX: New RFT Service for GPEC5

New Ready for Tuning (RFT) service for Continental GPEC5 control units installed on Jeep, Dodge, and RAM vehicles from Stellantis Group.

As of today, Flex supports OBD programming of these ECUs, allowing direct modification of the map area in order to optimize engine performance, improve power and torque, and cut consumption.

RFT service: how it works

In order to use the new OBD protocol, request the Ready for Tuning (RFT) service in your Magicmotorsport account.

Send your ECU to our labs: our team of experts will perform the professional and certified unlock, then the unit will be sent back to you, ready to be programmed with Flex.

Access to the RFT service

Users with an active Flex FLS0.5 Master or Slave license have direct access to the service, no need for anything else.

Those who do not have a Full license but have an active subscription can:

Buy the RFT license (single purchase)

Upgrade their license to Flex Full.

For further information, Contact us.

Helpdesk Coin system

All tech services, including RFT, work with Green Coins.

Master customers with an active subscription receive 300 Green Coins every month, the right amount to request a free unlock.

Additional coins can be purchased at any moment directly on the Helpdesk platform.

New Protocols:

  • Stellantis Continental GPEC5 MPC5777 Read/Write/Checksum Calculation Maps

This new protocol is available for the following software packages:

  • FLS0.1M – SW Flex ECU (car, van, bike) OBD/Bench Master
  • FLS0.1S – SW Flex ECU (car, van, bike) OBD/Bench Slave
  • FLS0.5M – SW Flex Full Master
  • FLS0.5S – SW Flex Full Slave

 

Posted on by

VF2 Flasher v2.9.3.2

Dear clients and friends – we are very pleased to announce UNLOCK services for MG1CS042 control units fitted to CITROEN / PEUGEOT / OPEL / DS vehicles. This applies to any and all LOCKED units produced after 2020. This service is provided exclusively to our clients, owners of a VF2 Flasher, as a mail-in service at GTD headquarters in Portugal. The service usually takes 2-3 business days but as some of you already know we’ve been processing MD1CS003 units same day. As usual you may contact support for further details. We also want to inform you that we will be releasing not one, not two but… wait for it… three updates for your VF2 Flasher November next month!

BENCH (Service Mode)

  • CITROEN MG1CS042 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • DS MG1CS042 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • OPEL MG1CS042 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • PEUGEOT MG1CS042 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)

VIDEO:

More info and pricing

Posted on by

VF2 Flasher v2.9.3.1

Dear clients and friends – The wait it over – after years of hard work and dedication we are very pleased to announce that we are now providing UNLOCK services at GTD headquarters in Portugal for MD1CS003 Control Units fitted to CITROEN / PEUGEOT / FIAT / OPEL / TOYOTA / VAUXHALL / DS vehicles. This applies to any and all units produced after 06/2020 – of course also including units produced in 2025! The service usually takes 2-3 business days and is provided exclusively to VF2 Flasher clients only! As usual you may contact support for further details.

BENCH (Service Mode)

  • CITROEN MD1CS003 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • DS MD1CS003 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • FIAT MD1CS003 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • OPEL MD1CS003 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • PEUGEOT MD1CS003 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • TOYOTA MD1CS003 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)
  • VAUXHALL MD1CS003 TC298: Read ( Int. Flash + Int. Eeprom + All[Backup] ) + Write ( Int. Flash + Int. Eeprom + All[Backup] ) / Recovery / Checksum(s)

VIDEO:

More info and pricing

Posted on by

CMDFlash VAG Simos 18 Probe

This BDM Style probe allows reading/writing of VAG Simos 18 control unit without soldering.

No additional resistors or boot pins are required!

It is supplied with a cable to connect the ecu to the boot interface (via flat cable which is supplied with CMDFlash). It can be used to read/write password and also read/write the memory over Boot Strap Loader mode.

Power is supplied by your existing CMD BDM/Tricore power supply.

User Manual

 

Buy Now

 

Posted on by

MPPS TPSG Opel / Vauxhall EDC17C59 Probe

This BDM Style probe allows reading/writing of Opel / Vauxhall Bosch EDC17C59 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects to the MPPS TPSG Interface.

The probe is fitted with switches that allow the circuit to be changed for password reading and also regular programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, power is supplied by your existing TPSG power supply.

Buy Now

User Manual
Posted on by

CMDFlash Nissan / Renault EDC17C84 Probe

EDC17C84_Front

This BDM Style probe allows reading/writing of Nissan and Renault Bosch EDC17C84 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and works only with our BSM interface for CMDFlash.

The probe is fitted with switches that allow the circuit to be changed for password reading
(CMD BMW Fxx plugin + BSM interface are required) and programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment, power is supplied by your existing CMD BDM/Tricore power supply.

Buy Now

User Manual
Posted on by

K-TAG / Trasdata Ford SID208 Probe

This BDM Style probe allows reading/writing of Ford & Land Rover Continental SID208 control units without soldering.

No additional resistors or boot pins are required!

It handles all connections to the ECU and connects directly to the K-TAG or Trasdata interface.

The probe is supports both password reading and programming over boot mode.

LED lights are fitted to the underside of the probe to aid alignment.

Buy Now

User Manual