Tag: SID802

Posted on by

BitBox 3.3.6 rev 1

New module:

  • BOSCH MG1/MD1 BENCH is now ready for sales and has been already tested. We remind that module works only with Scanmatik2/Scanmatik2 Pro devices and requires the latest driver version 2.21.11. List of tested ECU types you can check on our website! All other ECUs were not tested and will be supported ASAP. FID 282: Bosch MG1/MD1 SPC/AURIX BENCH with reading/writing and checksums calculation.
  • VAG Continental Simos12.1 now ready for tests, please contact BitBox support if you would like to beta test

Fixes and improvements:

  • Bosch INVCON3.3 support added to Bosch MG1/MD1 Bench
  • Delphi MT05 read/clear DTC has been returned
  • Kia/Hyundai SIM2K-25X/26X now works with Scanmatik2/Scanmatik2Pro. We recommend to use them.
  • PSA Continental SID208 now works with Scanmatik2/Scanmatik2Pro, other devices are also supported but not properly tested.

More Info

View Full Range of modules here.

bitbox_logo

Posted on by

Flex version 5.1.0.0

New OBD&BOOT solutions for Magneti Marelli 10GF and ZF AL552!

MAGICMOTORSPORT releases new OBD and BOOT solutions for programming Magneti Marelli 10GF engine control units and ZF AL552 automatic transmissions.

Released today with FLEX version 5.1.0.0 are more OBD and BOOT protocols for working on vehicles such as the Audi Q7 – 4M (MY2016) 3.0 TDI E-tron and Audi RS7 (MY2019) 4.0 TFSI; new solutions are also available for programming Magneti Marelli 10GF engine control units fitted on FCA group cars, among these the Fiat Argo X6H (MY2018) 1000 FlexPower.

New protocols added:

  • Volkswagen BOSCH EDC17U05 OBD: Read / Write / Checksum Calculation Maps – Write Update
  • Volkswagen BOSCH EDC17U01 OBD: Read / Write / Checksum Calculation Maps- Write Update
  • Porsche CONTINENTAL SDI9 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write External Eeprom
  • FAL Marelli 10GF BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write External Eeprom
  • AUDI ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
  • Volkswagen ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
  • Bentley ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
  • Porsche ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
  • FORD EMS2204 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write Internal Eeprom
  • FORD EMS2207 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write Internal Eeprom
  • FORD EMS2211 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write Internal Eeprom
  • FORD DCU201 BOOT: Read / Write / Checksum Calculation Internal Flash
  • FORD SID802 BOOT: Read / Write / Checksum Calculation Internal Flash

Bugfixes:

    • Improved autodetection for TP2.0 and UDS VAG BOSCH MEDC17 ECUs
More info and pricing

 

Posted on by

I/O Terminal Tool Siemens V50 + Denso V19 Update

Siemens ECU TOOL v50 Released:

VAG Siemens SIMOS 3PE – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PD – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PG – Read/Write Flash + Eeprom

KIA/HYUNDAI Siemens/Continental SIMK41 – Read/Write Flash + Emulated Eeprom

KIA/HYUNDAI Siemens/Continental SIM2K-48 – Read/Write Flash + Emulated Eeprom

 

Denso ECU TOOL v19 Released:

Correction made on Suzuki Swift 1.3 with 64F7055 processor

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens ECU Tool V49 Released

Siemens ECU TOOL v49 Released:

VAG Siemens SIMOS 3PA – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PB – Read/Write Flash + Eeprom

VAG Siemens SIMOS 3PC – Read/Write Flash + Eeprom

VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Siemens ECU Tool V48 Released

Siemens ECU TOOL v48 Released:

OPEL BOSCH ME155/ME76H4  Kline- Read/Write Flash + Eeprom, Change VIN/Mileage

OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage

Change VIN/Mileage function added to OPEL ME761/ME762

Some changes made in Opel/SAAB Trionic 8 ECUs software

Free for all owners of Siemens License.

 

ECU wiring diagrams updated

 

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

I/O Terminal Tool Denso V16 / Siemens ECU Tool V47 Released

DENSO ECU TOOL v16 Released:

Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC  DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56  eeprom. (CAN)

Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)

Free for all owners of Denso License.

 

Siemens ECU TOOL v47 Released:

OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom

OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom

OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Free for all owners of Siemens License.

For more info and a list of supported ECU’s, please visit the product page here.

Posted on by

Introducing I/O Terminal Tool

We are proud to announce the I/O Terminal Tool is now available at Chiptuningshop!

The I/O Terminal tool can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

It also supports some very tricky controllers which are not covered by other tools.

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

All operations are done over K-line or CAN bus without need to open ECU!

It currently supports Bosch, Easytronic, Denso, Marelli, and Siemens ECU’s. For more info click the desired plugin below:

Bosch Plugin
Denso Plugin
Siemens Plugin
Marelli Plugin
Easytronic Plugin

Buy Now

Posted on by

Siemens Plugin for I/O Terminal Tool

 

The ultimate tool for Siemens ECU’s, this I/O Terminal tool plugin can offer functions that normally would normally require the ECU to be opened and a BDM programmer connected, however it can accomplish these procedures without opening the ECU and in some cases all from OBD!

Using this tool you gain full control of the ECU’s memories.

You can read/write eeprom and internal/external flash memories (where available)

It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!

Read/modify service history data which contains date, mileage and diagnostic device ID.

It works with Siemens ECU’s for Alfa, Citroen, Daewoo, Ford, Hyundai, Jaguar, Kia, Land Rover, Mercedes Benz, Peugeot, Opel, VAG, Vauxhall and Volvo.

 

All operations are done over K-line or CAN bus without need to open ECU!

 

Buy Now

 

Supported ECU’s:

Alfa Romeo Simtec 75.3 Kline – Read/Write Flash + Emulated Eeprom

Daewoo Siemens/Kemsco D3 – Read/Write Flash + Emulated Eeprom

Kia/Hyundai Siemens SIMK31 – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIMK41 – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIM2K-34VR – Read/Write Flash + Emulated Eeprom
Kia/Hyundai Siemens SIM2K-48 – Read/Write Flash + Emulated Eeprom

Mercedes Benz Siemens/VDO MSM – Read/Write Flash + Emulated Eeprom
Mercedes Benz Siemens/VDO MSM 2.x – Read/Write Flash + Emulated Eeprom

Opel SIMTEC 70 – Read/Write Flash + Eeprom
Opel SIMTEC 71, 71.1, 71.5, 71.6, 75.5, 81, 81.1 – Read/Write Flash + Emulated Eeprom + Change Odometer
Opel BOSCH ME155/ME76H4 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom, Change VIN/Mileage
Opel Trionic 8 CAN – Read/Write Flash + Emulated Eeprom
Saab Trionic 8 CAN – Read/Write Flash + Emulated Eeprom

Jaguar / Land Rover Siemens SID201 – Read/Write Flash + Processor + Eeprom
Jaguar Siemens SID204 – Read/Write Flash + Processor + Eeprom

VAG Siemens SIMOS 3.3A / 3.4A – Read/Write Flash + Eeprom – BETA Version
VAG Siemens SIMOS 3PA / 3PB / 3PC / 3PD / 3PE / 3PG – Read/Write Flash + Eeprom
VAG Siemens SIMOS 6.2 – Read/Write Flash + Processor + Eeprom
VAG Siemens SIMOS 7.1 / 7.1A – Read/Write Flash + Eeprom – BETA Version
VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom

Ford Siemens SIM210, SIM22, SIM24, SIM28, SIM29 – Read/Write Flash + Eeprom
Ford Siemens SID802, SID803, SID804 – Read/Write Flash + Processor + Eeprom + Change Odometer
Ford Siemens SID803A – Read/Write Flash + Eeprom + Change Odometer

Volvo Siemens SID803 – Read/Write Flash + Processor + Eeprom + Change Odometer
Volvo Siemens SID803A – Read/Write Flash + Eeprom + Change Odometer

PSA ECU Detect – Autodetects ECU Type for PSA
PSA Siemens SID 201 – Read/Write Flash + Processor + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode
PSA Siemens SID 801, 801A, 802, 804, 805, 806 – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code, Eeprom CRC Check
PSA Siemens SID 803 – Read/Write Flash + Processor + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code
PSA Siemens SID 803A – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code, Eeprom CRC Check
PSA Siemens SID 805 – Read/Write Flash + Eeprom + Change Odometer, Read/Modify Service History, Set Virgin Mode, Read Pin Code