Subaru Forester 2.0D KH 2007 – Full Read/Write 64F7058 and 93C86 eeprom (CAN)
Nissan Navara D40 2.5DCI from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)
Nissan Pathfinder D40 2.5DCI from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)
Mitsubishi Delica D5 2.2DID 4N14 from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)
Mitsubishi Outlander 2.2DID 4N14 from year 2009 – Full Read/Write 64F7059 and 93C86 (CAN)
ECU wiring diagrams updated
VAG Siemens SIMOS 3PE – Read/Write Flash + Eeprom
VAG Siemens SIMOS 3PD – Read/Write Flash + Eeprom
VAG Siemens SIMOS 3PG – Read/Write Flash + Eeprom
KIA/HYUNDAI Siemens/Continental SIMK41 – Read/Write Flash + Emulated Eeprom
KIA/HYUNDAI Siemens/Continental SIM2K-48 – Read/Write Flash + Emulated Eeprom
Correction made on Suzuki Swift 1.3 with 64F7055 processor
ECU wiring diagrams updated
VAG Siemens SIMOS 3PA – Read/Write Flash + Eeprom
VAG Siemens SIMOS 3PB – Read/Write Flash + Eeprom
VAG Siemens SIMOS 3PC – Read/Write Flash + Eeprom
VAG Siemens SIMOS 9.1 – Read/Write Flash + Eeprom
ECU wiring diagrams updated
OPEL BOSCH ME155/ME76H4 Kline- Read/Write Flash + Eeprom, Change VIN/Mileage
OPEL Bosch ME761 29F800BB Kline – Read/Write Flash + Eeprom Change VIN/Mileage
Change VIN/Mileage function added to OPEL ME761/ME762
Some changes made in Opel/SAAB Trionic 8 ECUs software
Free for all owners of Siemens License.
ECU wiring diagrams updated
Jaguar/ Landrover P3.0NA / Jaguar XF 4.2SC DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)
Suzuki <2007 1.3/1.5/1.6 – full R/W 64F7055, R/W 93A56 eeprom. (CAN)
Volvo S80/XC90 4.4L V8 2007-2010 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)
Free for all owners of Denso License.
OPEL Bosch ME761 ST10F275 Kline – Read/Write Flash + Eeprom
OPEL Bosch ME762 ST10F275 Kline – Read/Write Flash + Eeprom
OPEL Bosch ME762 29F800BB Kline – Read/Write Flash + Eeprom
OPEL Trionic 8 CAN – Read/Write Flash + Emulated Eeprom
SAAB Trionic 8 CAN – Read/Write Flash + Emulated Eeprom
Free for all owners of Siemens License.
It also supports some very tricky controllers which are not covered by other tools.
Using this tool you gain full control of the ECU’s memories.
You can read/write eeprom and internal/external flash memories (where available)
It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!
Read/modify service history data which contains date, mileage and diagnostic device ID.
All operations are done over K-line or CAN bus without need to open ECU!
It currently supports Bosch, Easytronic, Denso, Marelli, and Siemens ECU’s. For more info click the desired plugin below:
Using this tool you gain full control of the ECU’s memories.
You can read/write eeprom and internal/external flash memories (where available)
It also allows reading of pin codes and can return the ECU to a virgin state, so it can be adapted to another car!
Read/modify odometer mileage stored in eeprom memory.
It works with Denso ECU’s for Mazda, Mitsubishi, Nissan, Opel, Suzuki, Vauxhall and Volvo.
Also included is a checksum correction facility for flash memories.
All operations are done over K-line or CAN bus without need to open ECU!
Supported ECU’s:
Jaguar/ Jaguar XF 4.2SC DENSO 64F7058 4.2SC – full R/W 64F7058,R/W 93A86 eeprom. (CAN)
Landrover / Range Rover AJ33 4.2 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)
Landrover P3.0NA DENSO 64F7058 – full R/W 64F7058,R/W 93A86 eeprom. (CAN)
Opel Meriva, Corsa C 1.7 CDTI Hybrid ECU – Full R/W 64F7055, R/W 93C66 eeprom, show pin code , reset(virgin). (CAN & K-LINE)
Opel Vectra C/Signum 3.0 CDTI – Full R/W 64F7058, R/W 93C86 x2 eeprom , show pin code , odometer calibration, reset(virgin). (CAN)
Opel 1.7CDTI 110CV/125CV Z17DTJ/Z17DTR/Z17DTH/A17DTH/A17DTR Astra H, Astra J, Zafira B, Corsa D, Meriva B, Tigra B – Full R/W 64F7058, R/W 93C86 x3 eeprom , odometer calibration, show pincode , reset(virgin). Full R/W 64F7059, R/W 93C86 x4 eeprom , odometer calibration, show pin code , reset(virgin). (CAN)
Mazda 3,5,6 RF7/RF8 ECU -Full R/W 64F7058, R/W 93C86 eeprom. (CAN)
Mazda 2 1.5 from year 2010 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)
Mazda RX8 Denso – Full R/W 64F7055, R/W 93C56 eeprom. (CAN)
Nissan Navara, Xtrail, Pathfinder 2.5DCI 2005-2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)
Nissan Navara/Pathfinder D40 2.5DCI from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)
Nissan Xtrail, Almera Tinos 2.2DCI 136v – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)
Mitsubishi Delica D5/Outlander 2.2DID 4N14 from year 2009 – Full R/W 64F7059, R/W 93C86 (CAN)
Mitsubishi L200, Pajero 4D56/4M41 2.5DID 136CV <2009 – Full R/W 64F7058, R/W 93C86 eeprom. (CAN)
Mitsubishi L200, Pajero 4D56/4M41 2.5/3.2 DID 2009> – Full R/W 64F7059, R/W 93C86 eeprom. (CAN)
Subaru Forester 2.0D KH 2007 – Full R/W 64F7058, R/W 93C86 eeprom (CAN)
Suzuki 1.3 <2007 – Full R/W 64F7055 R/W 93C56 eeprom. (CAN)
Suzuki 1.3, 1.5, 1.6 – Full R/W 64F7058, R/W 93A56 eeprom. (CAN)
Suzuki Jimny <2007 1.3 – Full R/W 64F7055, R/W 93A56 eeprom. (CAN)
Volvo V50, S40, V40 2006-2010 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)
Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7058, R/W 93C56 eeprom. (CAN)
Volvo V70, S60, S80 till 2006 140hp/170hp – Full R/W 64F7055, full R/W external flash 29LV200BC , R/W 93C56 eeprom. (CAN)
Volvo XC90 3.2L YC 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)
Volvo S80/XC90 4.4L V8 2007-2010 – Full R/W 64F7058, R/W 93A86 eeprom. (CAN)
This is a file service to recalculate the checksums in Bosch MED17 / EDC17 eeprom files.
It can be useful if you want to remove the speed limiter, reset flash counters or make any other changes in this memory, we can calculate the new checksum values so the controller will accept the data.
Please send your files by email so we can check them before making this purchase.
Module 30 is used for Bosch MEDC17 controllers using password protected TriCore TC17xx processor.
This module allows the reading and writing of flash and eeprom of “almost” all BOSCH EDC17 and MED17 by toolbox. With it is also possible to tune ECU’s which have a so-called Tuning-Protection 8/10. To compute to the checksum module 7 is required.
The module 30 is a pure software module. No additional hardware is included
** To open a slave “.pak” file of module 8, the matching master this module have unlocked also.
Module 9 is used for DSG controllers from Temic with TriCore processor.
Previously it was only possible to flash DSG DQ250 Temic PowerPC (Cxx software). However with module 9 it is now possible to flash also the newer generation of DSG controllers using Tricore processor.
** To open a slave “.pak” file of module 9, the matching master this module have unlocked also.
