This BDM Style probe allows reading/writing of the VAG MED17.5.2 control unit without soldering.
No additional resistors or boot pins are required!
It connects directly to the AVDI OBD cable. It can be used to read/write password over “OBD” communication and also to read/write the IROM/EEPROM memory over Boot Strap Loader mode by the flick of a switch.
LED lights are fitted to the underside of the probe to aid alignment.
The Kit includes an OBD adaptor cable and a 12V power supply.
This adapter cable allows you to connect to the CAN bus communication wires directly at the ECU, whilst utilising the OBD port for all other connections.
This bypasses the CAN gateway as required when using the AN055 function on MED17 and EDC17 controllers.
It is equipped with an OBD female port to attach to your AVDI tool, an OBD male port to connect to the vehicle and a 3 metre cable with CAN connections via crocodile clips to reach the ECU without removal. Also supplied are 2 x test pins which can be used to connect to the ECU pins or vehicle wiring harness.
The adapter is made using high quality OBD2 moulded connectors. The K-Line is also wired, allowing use on other applications.
